UPA0J102MPD1TD

ALUMINUM ELECTROLYTIC CAPACITORS UPA Miniature Sized, Low lmpedance, High Reliability For Switching Power Supplies Lower impedance than UPW. Smaller case size and high ripple current. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). UPA Low Impedance UPW Specifications Performance Characteristics ltem Category Temperature Range –55 to +105˚C Rated Voltage Range 6.3 to 35V Rated Capacitance Range 180 to 10000µF Capacitance Tolerance ± 20% at 120Hz, 20˚C Leakage Current After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.03CV or 4 (µA), whichever is greater. Rated voltage (V) 6.3 10 16 25 35 tan δ (MAX.) 0.22 0.19 0.16 0.14 0.12 Tangent of loss angle (tan δ) 120Hz 20˚C For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Stability at Low Temperature Rated voltage (V) 6.3 10 16 25 35 Impedance ratio (MAX.) Z–55˚C / Z+20˚C 3 3 3 3 3 The specifications listed below shall be met when the capacitors are restored to 20˚C after D.C. bias plus rated ripple current is applied at 105˚C for the condition listed at right.The peak voltage shall not exceed the rated voltage. Endurance φD(mm) Rated Voltage 6.3〜35V 120Hz φ8 φ10 > = φ12.5 3000hrs. 4000hrs. 5000hrs. Within ± 20% of the initial capacitance value(6.3V, 10V : ± 30%) 200% or less than the initial specified value (6.3V, 10V : 300%) Less than or equal to the initial specified value Capacitance change tan δ Leakage current After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Shelf Life Printed with white color letter on dark brown sleeve. Marking Radial Lead Type Type numbering system (Example : 10V 470µF) Sleeve (P.E.T.) 1 d 2 3 4 5 6 7 8 9 10 11 12 U PA 1 A 4 7 1 M P D P±0.5 φ D+ 0.5MAX. Size code Configuration Capacitance tolerance ( ±20%) Rated capacitance (470µF) L+ MAX. 15 MIN 4 MIN Rated voltage (10V) Pressure relief vent Series name Type (mm) (L < 20) 1.5 (L 20) 2.0 φD 8 10 12.5 16 18 P 3.5 5.0 5.0 7.5 7.5 φd 0.6 0.6 0.6 0.8 0.8 Configuration φD Pb-free leadwire Pb-free PET sleeve 8 10 12.5 to 18 PD HD Please refer to the Guidelines for Aluminum Electrolytic Capacitors for end seal configuration information. Frequency coefficient of rated ripple current Frequency 50Hz 120Hz 300Hz 1kHz 10kHz or more 180 to 330 0.55 0.65 0.75 0.85 1.00 390 to 1000 0.70 0.75 0.80 0.90 1.00 1200 to 10000 0.80 0.85 0.90 0.95 1.00 Cap. (µF) Dimension table in next page. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UPA ■ Dimensions Rated Voltage （V） （code） 6.3 （0J） 10 （1A） Rated Capacitance （µF） Case Size φD×L（mm） tan δ 560 8× 11.5 0.22 680 8× 11.5 0.22 1000 8× 15 1000 10× 12.5 1200 Leakage Current （µA） at 20℃ after 1 minute Impedance（Ω） MAX. Rated Ripple （mArms） （105℃/100kHz） Part Number 20℃/ 100kHz －10℃/ 100kHz 105.84 0.090 0.18 630 UPA0J561MPD 128.52 0.090 0.18 630 UPA0J681MPD 0.22 189 0.062 0.124 860 UPA0J102MPD 0.22 189 0.063 0.126 900 UPA0J102MPD6 10× 12.5 0.22 226.8 0.063 0.126 900 UPA0J122MPD 1200 10× 16 0.22 226.8 0.049 0.098 1240 UPA0J122MPD3 1500 8×20 0.22 283.5 0.044 0.088 1220 UPA0J152MPD 1500 10× 16 0.22 283.5 0.049 0.098 1240 UPA0J152MPD6 1500 10× 20 0.22 283.5 0.035 0.070 1490 UPA0J152MPD3 2200 10× 20 0.24 415.8 0.035 0.070 1490 UPA0J222MPD 2200 10× 25 0.24 415.8 0.033 0.066 1680 UPA0J222MPD3 2700 10×25 0.24 510.3 0.033 0.066 1680 UPA0J272MPD 3300 12.5× 20 0.26 623.7 0.029 0.058 1890 UPA0J332MHD 3900 12.5× 25 0.26 737.1 0.022 0.044 2280 UPA0J392MHD 4700 12.5× 25 0.28 888.3 0.022 0.044 2280 UPA0J472MHD 5600 12.5× 31.5 0.30 1058.4 0.018 0.036 2720 UPA0J562MHD 5600 16×20 0.30 1058.4 0.026 0.052 2330 UPA0J562MHD6 6800 12.5× 35.5 0.32 1285.2 0.016 0.032 2940 UPA0J682MHD 8200 16× 25 0.36 1549.8 0.019 0.038 2760 UPA0J822MHD 8200 18× 20 0.36 1549.8 0.025 0.050 2640 UPA0J822MHD6 10000 16× 31.5 0.40 1890 0.017 0.034 2810 UPA0J103MHD 10000 18× 25 0.40 1890 0.018 0.036 2850 UPA0J103MHD6 （ ） 470 8× 11.5 0.19 141 0.090 0.18 630 UPA1A471MPD 560 8× 11.5 0.19 168 0.090 0.18 630 UPA1A561MPD 820 8× 15 0.19 246 0.062 0.124 860 UPA1A821MPD 820 10× 12.5 0.19 246 0.063 0.126 900 UPA1A821MPD6 1000 8× 20 0.19 300 0.044 0.088 1220 UPA1A102MPD 1000 10× 12.5 0.19 300 0.063 0.126 900 UPA1A102MPD6 1000 10× 16 0.19 300 0.049 0.098 1240 UPA1A102MPD3 1200 8× 20 0.19 360 0.044 0.088 1220 UPA1A122MPD 1200 10× 16 0.19 360 0.049 0.098 1240 UPA1A122MPD6 1500 10× 20 0.19 450 0.035 0.070 1490 UPA1A152MPD 1800 10× 20 0.19 540 0.035 0.070 1490 UPA1A182MPD 1800 10×25 0.19 540 0.033 0.066 1680 UPA1A182MPD6 2200 10× 25 0.21 660 0.033 0.066 1680 UPA1A222MPD 2200 12.5× 20 0.21 660 0.029 0.058 1890 UPA1A222MHD3 2700 12.5× 20 0.21 810 0.029 0.058 1890 UPA1A272MHD 3300 12.5× 25 0.23 990 0.022 0.044 2280 UPA1A332MHD 3900 12.5× 25 0.23 1170 0.022 0.044 2280 UPA1A392MHD 4700 12.5× 31.5 0.25 1410 0.018 0.036 2720 UPA1A472MHD 4700 16× 20 0.25 1410 0.026 0.052 2330 UPA1A472MHD6 5600 12.5× 35.5 0.27 1680 0.016 0.032 2940 UPA1A562MHD 6800 16× 25 0.29 2040 0.019 0.038 2760 UPA1A682MHD 8200 16× 31.5 0.33 2460 0.017 0.034 2810 UPA1A822MHD 8200 18× 25 0.33 2460 0.018 0.036 2850 UPA1A822MHD6 For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UPA ■ Dimensions Rated Voltage （V） （code） 16 （1C） 25 （1E） Rated Capacitance （µF） Case Size φD×L（mm） tan δ Impedance（Ω） MAX. Leakage Current （µA） at 20℃ after 1 minute 20℃/ 100kHz －10℃/ 100kHz （ ） Rated Ripple （mArms） （105℃/100kHz） Part Number 330 8× 11.5 0.16 158.4 0.090 0.18 630 UPA1C331MPD 390 8× 11.5 0.16 187.2 0.090 0.18 630 UPA1C391MPD 470 10× 12.5 0.16 225.6 0.063 0.126 900 UPA1C471MPD 680 8× 15 0.16 326.4 0.062 0.124 860 UPA1C681MPD 680 10× 12.5 0.16 326.4 0.063 0.126 900 UPA1C681MPD6 820 8× 20 0.16 393.6 0.044 0.088 1220 UPA1C821MPD 820 10× 16 0.16 393.6 0.049 0.098 1240 UPA1C821MPD6 1000 10×16 0.16 480 0.049 0.098 1240 UPA1C102MPD 1000 10× 20 0.16 480 0.035 0.070 1490 UPA1C102MPD3 1200 10× 20 0.16 576 0.035 0.070 1490 UPA1C122MPD 1500 10× 25 0.16 720 0.033 0.066 1680 UPA1C152MPD 2200 12.5×20 0.18 1056 0.029 0.058 1890 UPA1C222MHD 2200 12.5×25 0.18 1056 0.022 0.044 2280 UPA1C222MHD3 2700 12.5×25 0.18 1296 0.022 0.044 2280 UPA1C272MHD 3300 12.5×31.5 0.20 1584 0.018 0.036 2720 UPA1C332MHD 3300 16× 20 0.20 1584 0.026 0.052 2330 UPA1C332MHD6 3900 12.5×35.5 0.20 1872 0.016 0.032 2940 UPA1C392MHD 4700 16× 25 0.22 2256 0.019 0.038 2760 UPA1C472MHD 4700 18× 20 0.22 2256 0.025 0.050 2640 UPA1C472MHD6 5600 16× 31.5 0.24 2688 0.017 0.035 2810 UPA1C562MHD 5600 18×25 0.24 2688 0.018 0.036 2850 UPA1C562MHD6 6800 18×25 0.26 3264 0.018 0.036 2850 UPA1C682MHD 270 8× 11.5 0.14 202.5 0.090 0.18 630 UPA1E271MPD 330 8× 11.5 0.14 247.5 0.090 0.18 630 UPA1E331MPD 390 8× 15 0.14 292.5 0.062 0.124 860 UPA1E391MPD 470 8× 15 0.14 352.5 0.062 0.124 860 UPA1E471MPD 470 10× 12.5 0.14 352.5 0.063 0.126 900 UPA1E471MPD6 560 8× 20 0.14 420 0.044 0.088 1220 UPA1E561MPD 560 10× 16 0.14 420 0.049 0.098 1240 UPA1E561MPD6 680 10× 16 0.14 510 0.049 0.098 1240 UPA1E681MPD 820 10× 20 0.14 615 0.035 0.070 1490 UPA1E821MPD 1000 10× 25 0.14 750 0.033 0.066 1680 UPA1E102MPD 1000 12.5× 20 0.14 750 0.029 0.058 1890 UPA1E102MHD3 1200 12.5× 20 0.14 900 0.029 0.058 1890 UPA1E122MHD 1800 12.5× 25 0.14 1350 0.022 0.044 2280 UPA1E182MHD 2200 12.5× 31.5 0.16 1650 0.018 0.036 2720 UPA1E222MHD 2200 16× 20 0.16 1650 0.026 0.052 2330 UPA1E222MHD6 2700 12.5× 35.5 0.16 2025 0.016 0.032 2940 UPA1E272MHD 3300 16× 25 0.18 2475 0.019 0.038 2760 UPA1E332MHD 3300 18× 20 0.18 2475 0.025 0.050 2640 UPA1E332MHD6 4700 18× 25 0.20 3525 0.018 0.036 2850 UPA1E472MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UPA ■ Dimensions Rated Voltage （V） （code） 35 （1V） Impedance（Ω） MAX. Leakage Current （µA） at 20℃ after 1 minute 20℃/ 100kHz －10℃/ 100kHz 0.12 189 0.090 0.12 283.5 0.062 10×12.5 0.12 283.5 0.063 8× 20 0.12 409.5 0.044 390 10×16 0.12 409.5 560 10×20 0.12 680 10×25 0.12 820 12.5× 20 1000 1200 1500 Rated Capacitance （µF） Rated Ripple （mArms） （105℃/100kHz） Part Number 0.18 630 UPA1V181MPD 0.124 860 UPA1V271MPD 0.126 900 UPA1V271MPD6 0.088 1220 UPA1V391MPD 0.049 0.098 1240 UPA1V391MPD6 588 0.035 0.070 1490 UPA1V561MPD 714 0.033 0.066 1680 UPA1V681MPD 0.12 861 0.029 0.058 1890 UPA1V821MHD 12.5× 20 0.12 1050 0.029 0.058 1890 UPA1V102MHD 12.5× 25 0.12 1260 0.022 0.044 2280 UPA1V122MHD 12.5× 31.5 0.12 1575 0.018 0.036 2720 UPA1V152MHD 1500 16× 20 0.12 1575 0.026 0.052 2330 UPA1V152MHD6 1800 12.5× 35.5 0.12 1890 0.016 0.032 2940 UPA1V182MHD 1800 16× 20 0.12 1890 0.026 0.052 2330 UPA1V182MHD6 2200 16× 25 0.14 2310 0.019 0.038 2760 UPA1V222MHD 2200 18× 20 0.14 2310 0.025 0.050 2640 UPA1V222MHD6 2700 16× 31.5 0.14 2835 0.017 0.035 2810 UPA1V272MHD 2700 18× 25 0.14 2835 0.018 0.036 2850 UPA1V272MHD6 3300 18× 31.5 0.16 3465 0.016 0.032 2910 UPA1V332MHD Case Size φD×L（mm） tan δ 180 8× 11.5 270 8× 15 270 390 （ ） For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100K