UPA0J272MPD

UPA0J272MPD

  • 厂商:

    NICHICON(尼吉康)

  • 封装:

  • 描述:

    UPA0J272MPD - ALUMINUM ELECTROLYTIC CAPACITORS - Nichicon corporation

  • 详情介绍
  • 数据手册
  • 价格&库存
UPA0J272MPD 数据手册
ALUMINUM ELECTROLYTIC CAPACITORS PA Miniature Sized, Low lmpedance, High Reliability For Switching Power Supplies series Lower impedance than PW series. Smaller case size and high ripple current. Adapted to the RoHS directive (2002/95/EC). PA Specifications ltem Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current Low Impedance PW Performance Characteristics – 55 ~ +105˚C 6.3 ~ 35V 180 ~ 10000µF ± 20% at 120Hz, 20˚C After 1 minutes' application of rated voltage, leakage current is not more than 0.03CV or 4 (µA), whichever is greater. Rated voltage (V) 6.3 0.22 10 0.19 16 0.16 25 0.14 35 0.12 120Hz 20˚C tan δ tan δ (MAX.) For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Rated voltage (V) Stability at Low Temperature 6.3 3 10 3 16 3 25 3 35 3 120Hz Impedance ratio ZT / Z20 (MAX.) Z–55˚C / Z+20˚C After an application of D.C. bias voltage plus the rated ripple current for 5000 hours ( 3000 hours for D = 8, 4000 hours for D = 10) at 105˚C the peak voltage shall not exceed the rated D.C. voltage, capacitors meet the characteristic requirements listed below. Endurance Capacitance change tan δ Leakage current Shelf Life Marking Within ± 20% of initial value (6.3V, 10V : ± 30%) 200% or less of initial specified value (6.3V, 10V : 300%) lnitial specified value or less After storing the capacitors under no load at 105˚C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. Printed with white color letter on dark brown sleeve. Radial Lead Type Type numbering system (Example : 10V 470µF) Sleeve (P.E.T.) D+ MAX. d UPA 1 A 4 7 1 MPD Size code Capacitance tolerance (±20%) Rated Capacitance (470µF) Rated voltage (10V) Series name Type Configuration Pb-free leadwire BD Pb-free PET sleeve PD 8 10 HD 12.5 ~ 18 Frequency coefficient of rated ripple current Cap. (µF) Frequency 1 2 3 4 5 6 7 8 9 10 11 B B L+ MAX. Pressure relief vent 15 MIN 4 MIN 6.3up (L < 20) 1.5 (L 20) 2.0 B D 8 10 12.5 16 18 P 3.5 5.0 5.0 7.5 7.5 Bd 0.6 0.6 0.6 0.8 0.8 0.5 0.5 0.5 0.5 0.5 (mm) : In case L > 25 for the B12.5 dia. unit, lead dia. B d = 0.8mm. P ± 0.5 50Hz 0.55 0.70 0.80 120Hz 0.65 0.75 0.85 300Hz 0.75 0.80 0.90 1kHz 0.85 0.90 0.95 10kHz~ 1.00 1.00 1.00 • Please refer to page 21 about the end seal configulation. 180 ~ 330 390 ~ 1000 1200 ~ 10000 Please refer to page 20, 21 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. Dimension table in next page. CAT.8100V ALUMINUM ELECTROLYTIC CAPACITORS PA Cap.(µF) series Standard ratings V (Code) Item Co de Case size φD × L (mm) 6.3 (0J) Impedance (Ω) MAX. 20˚C / 100kHz – 10˚C / 100kHz Rated ripple (mArms) 105˚C / 100kHz Case size φD × L (mm) 10 (1A) Impedance (Ω) MAX. 20˚C / 100kHz – 10˚C / 100kHz Rated ripple (mArms) 105˚C / 100kHz Case size φD × L (mm) 8 × 11.5 8 × 11.5 10 × 12.5 8 × 15 10 × 12.5 8 × 20 10 × 16 10 × 16 10 × 20 10 × 20 10 × 25 16 (1C) Impedance (Ω) MAX. 20˚C / 100kHz – 10˚C / 100kHz Rated ripple (mArms) 105˚C / 100kHz 0630 0630 0900 0860 0900 1220 1240 1240 1490 1490 330 390 470 560 680 820 331 391 471 561 681 821 8 × 11.5 8 × 11.5 0.090 0.090 0.180 0.180 0630 0630 8 × 11.5 8 × 11.5 0.090 0.090 0.180 0.180 0630 0630 0.090 0.090 0.063 0.062 0.063 0.044 0.049 0.049 0.035 0.035 0.180 0.180 0.126 0.124 0.126 0.088 0.098 0.098 0.070 0.070 1000 1200 102 122 8 × 15 10 × 12.5 10 × 12.5 10 × 16 8 × 20 10 × 16 10 × 20 0.062 0.063 0.063 0.049 0.044 0.049 0.035 0.124 0.126 0.126 0.098 0.088 0.098 0.070 0860 0900 0900 1240 1220 1240 1490 8 × 15 10 × 12.5 8 × 20 10 × 12.5 10 × 16 8 × 20 10 × 16 10 × 20 10 × 20 10 × 25 10 × 25 12.5 × 20 12.5 × 20 12.5 × 25 12.5 × 25 12.5 × 31.5 16 × 20 12.5 × 35.5 16 × 25 16 × 31.5 18 × 25 0.062 0.063 0.044 0.063 0.049 0.044 0.049 0.035 0.035 0.033 0.033 0.029 0.029 0.022 0.022 0.018 0.026 0.016 0.019 0.017 0.018 0.124 0.126 0.088 0.126 0.098 0.088 0.098 0.070 0.070 0.066 0.066 0.058 0.058 0.044 0.044 0.036 0.052 0.032 0.038 0.034 0.036 0860 0900 1220 0900 1240 1220 1240 1490 1490 1680 1680 1890 1890 2280 2280 2720 2330 2940 2760 2810 2850 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10000 152 182 222 272 332 392 472 562 682 822 103 V (Code) Item 0.033 0.066 1680 10 × 20 10 × 25 10 × 25 12.5 × 20 12.5 × 25 12.5 × 25 12.5 × 31.5 16 × 20 12.5 × 35.5 16 × 25 18 × 20 16 × 31.5 18 × 25 0.035 0.033 0.033 0.029 0.022 0.022 0.018 0.026 0.016 0.019 0.025 0.017 0.018 0.070 0.066 0.066 0.058 0.044 0.044 0.036 0.052 0.032 0.038 0.050 0.034 0.036 1490 1680 1680 1890 2280 2280 2720 2330 2940 2760 2640 2810 2850 12.5 × 20 12.5 × 25 12.5 × 25 12.5 × 31.5 16 × 20 12.5 × 35.5 16 × 25 18 × 20 16 × 31.5 18 × 25 18 × 25 0.029 0.022 0.022 0.018 0.026 0.016 0.019 0.025 0.017 0.018 0.018 0.058 0.044 0.044 0.036 0.052 0.032 0.038 0.050 0.035 0.036 0.036 1890 2280 2280 2720 2330 2940 2760 2640 2810 2850 2850 Cap.(µF) Co de Case size φD × L (mm) 25 (1E) Impedance (Ω) MAX. 20˚C / 100kHz – 10˚C / 100kHz Rated ripple (mArms) 105˚C / 100kHz Case size φD × L (mm) 8 × 11.5 8 × 15 10 × 12.5 8 × 20 10 × 16 35 (1V) Impedance (Ω) MAX. 20˚C / 100kHz – 10˚C / 100kHz Rated ripple (mArms) 105˚C / 100kHz 0630 0860 0900 1220 1240 180 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 4700 181 271 331 391 471 561 681 821 102 122 152 182 222 272 332 472 12.5 × 25 12.5 × 31.5 16 × 20 12.5 × 35.5 16 × 25 18 × 20 18 × 25 0.022 0.018 0.026 0.016 0.019 0.025 0.018 0.044 0.036 0.052 0.032 0.038 0.050 0.036 2280 2720 2330 2940 2760 2640 2850 8 × 11.5 8 × 11.5 8 × 15 8 × 15 10 × 12.5 8 × 20 10 × 16 10 × 16 10 × 20 10 × 25 12.5 × 20 12.5 × 20 0.090 0.090 0.062 0.062 0.063 0.044 0.049 0.049 0.035 0.033 0.029 0.029 0.180 0.180 0.124 0.124 0.126 0.088 0.098 0.098 0.070 0.066 0.058 0.058 0630 0630 0860 0860 0900 1220 1240 1240 1490 1680 1890 1890 0.090 0.062 0.063 0.044 0.049 0.180 0.124 0.126 0.088 0.098 10 × 20 10 × 25 12.5 × 20 12.5 × 20 12.5 × 25 12.5 × 31.5 16 × 20 12.5 × 35.5 16 × 20 16 × 25 18 × 20 16 × 31.5 18 × 25 18 × 31.5 0.035 0.033 0.029 0.029 0.022 0.018 0.026 0.016 0.026 0.019 0.025 0.017 0.018 0.016 0.070 0.066 0.058 0.058 0.044 0.036 0.052 0.032 0.052 0.038 0.050 0.035 0.036 0.032 1490 1680 1890 1890 2280 2720 2330 2940 2330 2760 2640 2810 2850 2910 : In this case, 6 will be put at 12th digit of type numbering system. : In this case, 3 will be put at 12th digit of type numbering system. CAT.8100V
UPA0J272MPD
### 物料型号 - 铝电解电容器的型号编号系统示例为:10V 470µF。

### 器件简介 - 该系列电容器具有小型化、低阻抗、高可靠性的特点,适用于开关电源。 - 阻抗低于PW系列,体积更小且支持更高的纹波电流。 - 符合RoHS指令(2002/95/EC)。

### 引脚分配 - 电容器为径向引线类型,具体的引脚配置和尺寸在文档中有详细的图表说明。

### 参数特性 - 温度范围:-55~+105°C - 额定电压范围:6.3 ~35V - 额定电容范围:180~10000F - 电容公差:±20% at 120Hz, 20°C - 漏电流:在额定电压下1分钟后,漏电流不超过0.03CV或4μA,取两者中较大值。 - 损耗角正切(tanδ):不同电压下的损耗角正切值不同,例如在6.3V下为0.22,在35V下为0.12。 - 低温稳定性:在-55°C和20°C下的阻抗比值最大为3。 - 耐久性:在105°C下施加直流偏压和额定纹波电流5000小时后,峰值电压不超过额定直流电压,电容变化在初始值的±20%以内(6.3V和10V为±30%),损耗角正切不超过初始值的200%(6.3V和10V为300%)。

### 功能详解 - 电容器在存储和电压处理后,能够满足耐久性特性的要求。 - 电容器的外壳上印有白色字母,底色为深棕色。

### 应用信息 - 适用于开关电源等电子设备。

### 封装信息 - 提供了不同尺寸和额定电压下的封装尺寸(DxL mm)和阻抗信息。 - 详细列出了不同频率下的额定纹波电流系数。
UPA0J272MPD 价格&库存

很抱歉,暂时无法提供与“UPA0J272MPD”相匹配的价格&库存,您可以联系我们找货

免费人工找货