UPA1A682MPD

厂商：
NICHICON(尼吉康)
封装：
描述：
UPA1A682MPD - ALUMINUM ELECTROLYTIC CAPACITORS - Nichicon corporation

数据手册：

下载UPA1A682MPD.pdf

立即购买

详情介绍
数据手册
价格&库存

UPA1A682MPD 数据手册

ALUMINUM ELECTROLYTIC CAPACITORS PA Miniature Sized, Low lmpedance, High Reliability For Switching Power Supplies series Lower impedance than PW series. Smaller case size and high ripple current. Adapted to the RoHS directive (2002/95/EC). PA Specifications ltem Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current Low Impedance PW Performance Characteristics – 55 ~ +105˚C 6.3 ~ 35V 180 ~ 10000µF ± 20% at 120Hz, 20˚C After 1 minutes' application of rated voltage, leakage current is not more than 0.03CV or 4 (µA), whichever is greater. Rated voltage (V) 6.3 0.22 10 0.19 16 0.16 25 0.14 35 0.12 120Hz 20˚C tan δ tan δ (MAX.) For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Rated voltage (V) Stability at Low Temperature 6.3 3 10 3 16 3 25 3 35 3 120Hz Impedance ratio ZT / Z20 (MAX.) Z–55˚C / Z+20˚C After an application of D.C. bias voltage plus the rated ripple current for 5000 hours ( 3000 hours for D = 8, 4000 hours for D = 10) at 105˚C the peak voltage shall not exceed the rated D.C. voltage, capacitors meet the characteristic requirements listed below. Endurance Capacitance change tan δ Leakage current Shelf Life Marking Within ± 20% of initial value (6.3V, 10V : ± 30%) 200% or less of initial specified value (6.3V, 10V : 300%) lnitial specified value or less After storing the capacitors under no load at 105˚C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. Printed with white color letter on dark brown sleeve. Radial Lead Type Type numbering system (Example : 10V 470µF) Sleeve (P.E.T.) D+ MAX. d UPA 1 A 4 7 1 MPD Size code Capacitance tolerance (±20%) Rated Capacitance (470µF) Rated voltage (10V) Series name Type Configuration Pb-free leadwire BD Pb-free PET sleeve PD 8 10 HD 12.5 ~ 18 Frequency coefficient of rated ripple current Cap. (µF) Frequency 1 2 3 4 5 6 7 8 9 10 11 B B L+ MAX. Pressure relief vent 15 MIN 4 MIN 6.3up (L < 20) 1.5 (L 20) 2.0 B D 8 10 12.5 16 18 P 3.5 5.0 5.0 7.5 7.5 Bd 0.6 0.6 0.6 0.8 0.8 0.5 0.5 0.5 0.5 0.5 (mm) : In case L > 25 for the B12.5 dia. unit, lead dia. B d = 0.8mm. P ± 0.5 50Hz 0.55 0.70 0.80 120Hz 0.65 0.75 0.85 300Hz 0.75 0.80 0.90 1kHz 0.85 0.90 0.95 10kHz~ 1.00 1.00 1.00 • Please refer to page 21 about the end seal configulation. 180 ~ 330 390 ~ 1000 1200 ~ 10000 Please refer to page 20, 21 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. Dimension table in next page. CAT.8100V ALUMINUM ELECTROLYTIC CAPACITORS PA Cap.(µF) series Standard ratings V (Code) Item Co de Case size φD × L (mm) 6.3 (0J) Impedance (Ω) MAX. 20˚C / 100kHz – 10˚C / 100kHz Rated ripple (mArms) 105˚C / 100kHz Case size φD × L (mm) 10 (1A) Impedance (Ω) MAX. 20˚C / 100kHz – 10˚C / 100kHz Rated ripple (mArms) 105˚C / 100kHz Case size φD × L (mm) 8 × 11.5 8 × 11.5 10 × 12.5 8 × 15 10 × 12.5 8 × 20 10 × 16 10 × 16 10 × 20 10 × 20 10 × 25 16 (1C) Impedance (Ω) MAX. 20˚C / 100kHz – 10˚C / 100kHz Rated ripple (mArms) 105˚C / 100kHz 0630 0630 0900 0860 0900 1220 1240 1240 1490 1490 330 390 470 560 680 820 331 391 471 561 681 821 8 × 11.5 8 × 11.5 0.090 0.090 0.180 0.180 0630 0630 8 × 11.5 8 × 11.5 0.090 0.090 0.180 0.180 0630 0630 0.090 0.090 0.063 0.062 0.063 0.044 0.049 0.049 0.035 0.035 0.180 0.180 0.126 0.124 0.126 0.088 0.098 0.098 0.070 0.070 1000 1200 102 122 8 × 15 10 × 12.5 10 × 12.5 10 × 16 8 × 20 10 × 16 10 × 20 0.062 0.063 0.063 0.049 0.044 0.049 0.035 0.124 0.126 0.126 0.098 0.088 0.098 0.070 0860 0900 0900 1240 1220 1240 1490 8 × 15 10 × 12.5 8 × 20 10 × 12.5 10 × 16 8 × 20 10 × 16 10 × 20 10 × 20 10 × 25 10 × 25 12.5 × 20 12.5 × 20 12.5 × 25 12.5 × 25 12.5 × 31.5 16 × 20 12.5 × 35.5 16 × 25 16 × 31.5 18 × 25 0.062 0.063 0.044 0.063 0.049 0.044 0.049 0.035 0.035 0.033 0.033 0.029 0.029 0.022 0.022 0.018 0.026 0.016 0.019 0.017 0.018 0.124 0.126 0.088 0.126 0.098 0.088 0.098 0.070 0.070 0.066 0.066 0.058 0.058 0.044 0.044 0.036 0.052 0.032 0.038 0.034 0.036 0860 0900 1220 0900 1240 1220 1240 1490 1490 1680 1680 1890 1890 2280 2280 2720 2330 2940 2760 2810 2850 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10000 152 182 222 272 332 392 472 562 682 822 103 V (Code) Item 0.033 0.066 1680 10 × 20 10 × 25 10 × 25 12.5 × 20 12.5 × 25 12.5 × 25 12.5 × 31.5 16 × 20 12.5 × 35.5 16 × 25 18 × 20 16 × 31.5 18 × 25 0.035 0.033 0.033 0.029 0.022 0.022 0.018 0.026 0.016 0.019 0.025 0.017 0.018 0.070 0.066 0.066 0.058 0.044 0.044 0.036 0.052 0.032 0.038 0.050 0.034 0.036 1490 1680 1680 1890 2280 2280 2720 2330 2940 2760 2640 2810 2850 12.5 × 20 12.5 × 25 12.5 × 25 12.5 × 31.5 16 × 20 12.5 × 35.5 16 × 25 18 × 20 16 × 31.5 18 × 25 18 × 25 0.029 0.022 0.022 0.018 0.026 0.016 0.019 0.025 0.017 0.018 0.018 0.058 0.044 0.044 0.036 0.052 0.032 0.038 0.050 0.035 0.036 0.036 1890 2280 2280 2720 2330 2940 2760 2640 2810 2850 2850 Cap.(µF) Co de Case size φD × L (mm) 25 (1E) Impedance (Ω) MAX. 20˚C / 100kHz – 10˚C / 100kHz Rated ripple (mArms) 105˚C / 100kHz Case size φD × L (mm) 8 × 11.5 8 × 15 10 × 12.5 8 × 20 10 × 16 35 (1V) Impedance (Ω) MAX. 20˚C / 100kHz – 10˚C / 100kHz Rated ripple (mArms) 105˚C / 100kHz 0630 0860 0900 1220 1240 180 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 4700 181 271 331 391 471 561 681 821 102 122 152 182 222 272 332 472 12.5 × 25 12.5 × 31.5 16 × 20 12.5 × 35.5 16 × 25 18 × 20 18 × 25 0.022 0.018 0.026 0.016 0.019 0.025 0.018 0.044 0.036 0.052 0.032 0.038 0.050 0.036 2280 2720 2330 2940 2760 2640 2850 8 × 11.5 8 × 11.5 8 × 15 8 × 15 10 × 12.5 8 × 20 10 × 16 10 × 16 10 × 20 10 × 25 12.5 × 20 12.5 × 20 0.090 0.090 0.062 0.062 0.063 0.044 0.049 0.049 0.035 0.033 0.029 0.029 0.180 0.180 0.124 0.124 0.126 0.088 0.098 0.098 0.070 0.066 0.058 0.058 0630 0630 0860 0860 0900 1220 1240 1240 1490 1680 1890 1890 0.090 0.062 0.063 0.044 0.049 0.180 0.124 0.126 0.088 0.098 10 × 20 10 × 25 12.5 × 20 12.5 × 20 12.5 × 25 12.5 × 31.5 16 × 20 12.5 × 35.5 16 × 20 16 × 25 18 × 20 16 × 31.5 18 × 25 18 × 31.5 0.035 0.033 0.029 0.029 0.022 0.018 0.026 0.016 0.026 0.019 0.025 0.017 0.018 0.016 0.070 0.066 0.058 0.058 0.044 0.036 0.052 0.032 0.052 0.038 0.050 0.035 0.036 0.032 1490 1680 1890 1890 2280 2720 2330 2940 2330 2760 2640 2810 2850 2910 : In this case, 6 will be put at 12th digit of type numbering system. : In this case, 3 will be put at 12th digit of type numbering system. CAT.8100V

下载 PDF

UPA1A682MPD

物料型号： - 型号编号系统示例：10V 470µF，其中包含电压和电容值。

器件简介： - PA系列是小型化、低阻抗、高可靠性的铝电解电容器，适用于开关电源。 - 比PW系列阻抗更低，尺寸更小，耐纹波电流更高。 - 符合RoHS指令（2002/95/EC）。

引脚分配： - 径向引线类型，具体配置见表格，包含尺寸（mm）和标记。

参数特性： - 工作温度范围：-55~+105°C。 - 额定电压范围：6.3 ~35V。 - 额定电容范围：180~10000F。 - 电容公差：±20% at 120Hz, 20°C。 - 漏电流：额定电压施加1分钟后，漏电流不超过0.03CV或4μA，取较大值。 - tanδ（损耗角）最大值：6.3V为0.22，10V为0.19，16V为0.16，25V为0.14，35V为0.12。对于超过1000F的电容，每增加1000F，增加0.02。 - 低温稳定性：在-55°C/Z20°C下的阻抗比ZT/Z20最大值为3。 - 耐久性：在105°C下施加直流偏压和额定纹波电流5000小时后（D=8为3000小时，D=10为4000小时），峰值电压不超过额定直流电压，电容符合耐久性特性要求。

功能详解： - 耐久性后电容变化：初始值的±20%（6.3V, 10V为±30%）。 - 耐久性后tanδ：初始指定值的200%或更少（6.3V, 10V为300%）。 - 耐久性后漏电流：不超过初始指定值。 - 储存寿命：在105°C下无负载储存1000小时后，根据JIS C 5101-4条款4.1在20°C下进行电压处理，符合上述耐久性特性的指定值。

应用信息： - 适用于开关电源。

封装信息： - 封装类型包括径向引线型，具体尺寸和引线类型见表格。 - 铅线和PET套管均无铅。

UPA1A682MPD 价格&库存

-> 查询更多价格&库存

很抱歉，暂时无法提供与“UPA1A682MPD”相匹配的价格&库存，您可以联系我们找货

免费人工找货

搜索历史

UPA1A682MPD

相关技术文章