UPB1E331MPD

ALUMINUM ELECTROLYTIC CAPACITORS PB Miniature Sized, High Ripple Current High Reliability series High ripple current load life of 5000 / 7000 hours at +105°C. Suited for ballast application. Adapted to the RoHS directive (2002/95/EC). CA Long Life PB Smaller PT Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Performance Characteristics – 40 ~ +105°C (10 ~ 50V), – 25 ~ +105°C (160 ~ 450V) 10 ~ 450V 0.47 ~ 3300µF ± 20% at 120Hz, 20°C Rated Voltage (V) 10 ~ 50V After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA) , whichever is greater. 160 ~ 450V After 2 minutes' application of rated voltage, leakage current is not more than 0.06CV+10 (µA) . Leakage Current —— — Measurement frequency : 120Hz, Temperature : 20°C tan δ Rated voltage (V) tan δ ( MAX.) 10 0.30 16 0.25 25 0.22 10 3 35 0.18 16 2 50 0.15 25 2 35 2 160 0.15 50 2 200 0.15 160 3 250 0.15 200 3 350 0.20 250 3 350 4 400 0.24 400 6 450 0.24 450 6 Measurement frequency : 120Hz Stability at Low Temperature Rated voltage (V) Impedance ratio ZT / Z20 (MAX.) Z–25°C / Z+20°C Endurance After an application of D.C. bias voltage plus the rated ripple current for 5000 hours (φ10 · φ12.5 (10 ~ 50V) : 7000 hours) at 105°C the peak voltage shall not exceed the rated D.C. voltage, capacitors meet the characteristic requirements listed at right. Capacitance change tan δ Leakage current Within ± 30% of initial value (10 ~ 50V) Within ± 20% of initial value (160 ~ 450V) 300% or less of initial specified value (10 ~ 50V) 200% or less of initial specified value (160 ~ 450V) Initial specified value or less Shelf Life Marking After storing the capacitors under no load at 105˚C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. Printed with white color letter on dark brown sleeve. Radial Lead Type Sleeve (P.E.T.) B Type numbering system (Example : 160V 22µF) d UPB 2 C 2 2 0 M PD P ± 0.5 1 2 3 4 5 6 7 8 9 10 11 12 Size code Configuration Capacitance tolerance (±20%) Rated Capacitance (22µF) Rated voltage (160V) Series name Type B D+ MAX Pressure relief vent (B6.3up) L + MAX 15MIN 4MIN B D 5 6.3 8 10 12.5 P 2.0 2.5 3.5 5.0 5.0 Bd 0.5 0.5 0.6 0.6 0.6 0.5 0.5 0.5 0.5 0.5 (BD 18) 1.5 (BD 22) 2.0 16 18 22 25 7.5 7.5 10.0 12.5 0.8 0.8 1.0 1.0 0.5 0.5 1.0 1.0 (mm) Configuration Pb-free leadwire BD Pb-free PET sleeve 5 DD 6.3 ED 8 á 10 PD 12.5 ~ 18 HD 22 á 25 RD • Please refer to page 21 about the end seal configulation. Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. Dimension table in next page. CAT.8100V ALUMINUM ELECTROLYTIC CAPACITORS PB Cap.(µF) series Dimensions V Code 10 1A 16 1C 25 1E 35 1V 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 2200 3300 R47 010 2R2 3R3 4R7 100 220 330 470 101 221 331 471 102 222 332 5 × 11 6.3 × 11 8 × 11.5 8 × 11.5 10 × 16 12.5 × 20 12.5 × 25 70 100 150 180 350 550 810 6.3 × 11 8 × 11.5 8 × 11.5 10 × 12.5 10 × 20 12.5 × 25 85 130 195 270 430 710 5 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 16 12.5 × 20 55 95 195 255 325 500 5 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 16 10 × 20 12.5 × 25 50 60 100 200 280 350 570 50 1H 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 6.3 × 11 6.3 × 11 8 × 11.5 10 × 16 10 × 20 12.5 × 20 5 10 15 20 25 30 40 55 65 100 235 295 370 Rated ripple Case size φ D × L(mm) Rated Ripple (mArms) at 105°C 120Hz V Cap.(µF) Code 160 2C 200 2D 250 2E 350 2V 10 × 20 125 250 175 350 250 500 325 650 400 2G 10 × 20 12.5 × 25 16 × 25 18 × 25 125 250 200 400 300 600 375 750 450 2W 12.5 × 20 16 × 25 18 × 25 18 × 31.5 18 × 35.5 150 300 275 550 350 700 425 850 475 950 500 1000 550 1100 10 22 33 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 100 220 330 470 560 680 820 101 121 151 181 221 271 331 391 471 561 681 821 18 × 31.5 18 × 35.5 18 × 40 22 × 40 22 × 50 25 × 40 25 × 50 850 1700 950 1900 1050 2100 1150 2300 1350 2700 1500 3000 18 × 31.5 18 × 31.5 18 × 40 22 × 40 850 1700 950 1900 1050 2100 1150 2300 18 × 25 650 1300 18 × 25 650 1300 18 × 31.5 18 × 35.5 18 × 40 22 × 40 750 1500 850 1700 950 1900 1050 2100 16 × 25 550 1100 16 × 25 550 1100 18 × 25 600 1200 12.5 × 25 375 750 12.5 × 25 375 750 16 × 25 500 1000 10 × 20 10 × 20 12.5 × 20 250 500 250 500 300 600 10 × 20 12.5 × 20 12.5 × 20 250 500 300 600 300 600 12.5 × 20 12.5 × 20 12.5 × 25 300 600 300 600 350 700 12.5 × 20 16 × 20 16 × 25 18 × 25 400 800 18 × 31.5 18 × 35.5 18 × 31.5 18 × 35.5 18 × 40 22 × 40 500 1000 575 1150 650 1300 750 1500 18 × 40 22 × 40 450 900 500 1000 550 1100 600 1200 18 × 40 22 × 40 22 × 50 25 × 40 25 × 50 700 1400 800 1600 22 × 50 25 × 40 25 × 50 800 1600 900 1800 22 × 50 25 × 40 25 × 50 22 × 50 25 × 40 25 × 50 950 1900 1050 2100 22 × 50 25 × 40 25 × 50 1150 2300 1400 2800 1350 2700 1500 3000 Case Size Rated φ D × L(mm) ripple : Rated ripple (mArms) at 105°C 120Hz : Rated ripple (mArms) at 105°C 100kHz : In this case, 6 will be put at 12th digit of type numbering system. Frequency coefficient of rated ripple current V 10 ~ 50 160 ~ 450 Cap.(µF) Frequency 0.47 ~ 100 0022 ~ 4700 1000 ~ 3300 010 ~ 820 50Hz 0.75 0.85 0.95 0.60 120Hz 1.00 1.00 1.00 1.00 300Hz 1.20 1.10 1.03 1.20 1kHz 1.40 1.20 1.05 1.60 10k ~ 50kHz 100kHz 1.55 1.65 1.25 1.30 1.10 1.15 1.80 2.00 Wider range of rating. CAT.8100V