UPB2D681MRD

ALUMINUM ELECTROLYTIC CAPACITORS PB Miniature Sized, High Ripple Current High Reliability series High ripple current load life of 5000 / 7000 hours at +105°C. Suited for ballast application. Compliant to the RoHS directive (2002/95/EC). CA PB Long Life Products which are scheduled to be discontinued. Not recommended for new designs Smaller PT Specifications Item Performance Characteristics Category Temperature Range – 40 to +105°C (10 to 50V), – 25 to +105°C (160 to 450V) Rated Voltage Range 10 to 450V Rated Capacitance Range 0.47 to 3300µF Capacitance Tolerance ± 20% at 120Hz, 20°C Rated Voltage (V) Leakage Current 10 to 50V 160 to 450V After 2 minutes' application of rated voltage, leakage current is not more than 0.06CV+10 (µA) . After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA) , whichever is greater. ——— Measurement frequency : 120Hz at 20°C Tangent of loss angle (tan δ) Rated voltage (V) tan δ (MAX.) 10 0.30 16 0.25 25 0.22 35 0.18 50 0.15 160 0.15 200 0.15 250 0.15 350 0.20 400 0.24 450 0.24 Measurement frequency : 120Hz Rated voltage (V) Stability at Low Temperature Impedance ratio ZT / Z20 (MAX.) Z–25°C / Z+20°C 10 3 16 2 The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 5000 hours (7000 hours for φD=10 and 12.5 (10 to 50V)) at 105°C, the peak voltage shall not exceed the rated voltage. Endurance 25 2 35 2 50 2 160 3 200 3 250 3 350 4 400 6 450 6 Within ± 30% of the initial capacitance value (10 to 50V) Within ± 20% of the initial capacitance value (160 to 450V) Capacitance change 300% or less than the initial specified value (10 to 50V) 200% or less than the initial specified value (160 to 450V) Less than or equal to the initial specified value tan δ Leakage current Shelf Life After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on dark brown sleeve. Type numbering system (Example : 160V 22µF) Radial Lead Type φd Sleeve (P.E.T.) 1 2 3 4 5 6 7 8 9 10 11 12 UP B 2 C 2 2 0 M PD φD+ P ± 0.5 MAX Size code Configuration Capacitance tolerance (± 20%) Rated capacitance (22µF) Pressure relief vent (φ6.3up) L+ 15MIN MAX Rated voltage (160V) 4MIN Series name Type (mm) φD 5 6.3 8 10 12.5 16 18 22 25 P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 10.0 12.5 φd 0.5 0.5 0.6 0.6 0.6 0.8 0.8 1.0 1.0 0.5 0.5 0.5 0.5 0.5 0.5 0.5 1.0 1.0 (φD 18) 1.5 (φD 22) 2.0 Configuration φD Pb-free leadwire Pb-free PET sleeve 5 DD 6.3 8 · 10 12.5 to 18 22 · 25 ED PD HD RD • Please refer to page 20 about the end seal configulation. Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. CAT.8100B ALUMINUM ELECTROLYTIC CAPACITORS PB series Dimensions 10 1A V Cap.(µF) Code R47 010 2R2 3R3 4R7 100 220 330 470 101 221 331 471 102 222 332 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 2200 3300 5 × 11 6.3 × 11 8 × 11.5 8 × 11.5 10 × 16 12.5 × 20 12.5 × 25 16 1C 6.3 × 11 8 × 11.5 8 × 11.5 10 × 12.5 10 × 20 12.5 × 25 70 100 150 180 350 550 810 25 1E 5 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 16 12.5 × 20 85 130 195 270 430 710 35 1V 5 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 16 10 × 20 12.5 × 25 55 95 195 255 325 500 50 1H 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 6.3 × 11 6.3 × 11 8 × 11.5 10 × 16 10 × 20 12.5 × 20 5 10 15 20 25 30 40 55 65 100 235 295 370 Case size φ D × L(mm) Rated ripple 50 60 100 200 280 350 570 Rated ripple current (mArms) at 105°C 120Hz 160 2C V Cap.(µF) Code 100 22 220 10 × 20 33 330 10 × 20 47 470 12.5 × 20 56 560 68 680 82 820 101 120 121 150 151 180 181 220 221 270 271 330 331 250 2E 350 2V 250 500 250 500 300 600 250 500 300 600 300 600 10 × 20 12.5 × 20 12.5 × 20 300 600 300 600 350 700 12.5 × 20 12.5 × 20 12.5 × 25 125 250 175 350 250 500 325 650 12.5 × 20 16 × 20 16 × 25 12.5 × 25 375 750 16 × 25 550 1100 12.5 × 25 375 750 16 × 25 550 1100 16 × 25 500 1000 18 × 25 600 1200 400 800 18 × 25 18 × 31.5 18 × 35.5 18 × 25 650 1300 650 1300 18 × 25 18 × 31.5 18 × 35.5 850 1700 950 1900 1050 2100 1150 2300 18 × 31.5 18 × 31.5 18 × 31.5 18 × 35.5 470 471 18 × 40 560 561 22 × 40 680 681 22 × 50 25 × 40 820 821 25 × 50 850 1700 950 1900 1050 2100 1150 2300 1350 2700 1500 3000 18 × 40 22 × 40 18 × 40 22 × 40 18 × 40 22 × 40 16 × 25 18 × 25 18 × 31.5 Cap.(µF) Frequency 0.47 to 100 0022 to 4700 1000 to 3300 010 to 820 18 × 40 22 × 40 125 250 200 400 300 600 375 750 12.5 × 20 16 × 25 18 × 25 18 × 31.5 450 900 500 1000 550 1100 600 1200 18 × 40 22 × 40 22 × 50 25 × 40 25 × 50 22 × 50 25 × 40 25 × 50 22 × 50 25 × 40 25 × 50 22 × 50 25 × 40 25 × 50 22 × 50 25 × 40 750 1500 850 1700 950 1900 1050 2100 500 1000 575 1150 650 1300 750 1500 150 300 275 550 350 700 425 850 475 950 500 1000 550 1100 700 1400 800 1600 800 1600 900 1800 950 1900 1050 2100 1150 2300 1400 2800 1350 2700 1500 3000 25 × 50 Case size Rated φ D × L(mm) ripple Frequency coefficient of rated ripple current 160 to 450 12.5 × 25 18 × 35.5 391 10 to 50 10 × 20 18 × 35.5 390 V 450 2W 400 2G 10 × 20 10 100 200 2D 50Hz 0.75 0.85 0.95 0.60 120Hz 1.00 1.00 1.00 1.00 300Hz 1.20 1.10 1.03 1.20 1kHz 1.40 1.20 1.05 1.60 10k to 50kHz 100kHz or more 1.55 1.65 1.25 1.30 1.10 1.15 1.80 2.00 : Rated ripple current (mArms) at 105°C 120Hz : Rated ripple current (mArms) at 105°C 100kHz : In this case, 6 will be put at 12th digit of type numbering system. Wider range of rating. CAT.8100B