UPJ2D3R3MPD1TD

ALUMINUM ELECTROLYTIC CAPACITORS UPJ Low Impedance, For Switching Power Supplies Low impedance and high reliability withstanding 5000 hours load life at +105˚C (3000 / 2000 hours for smaller case sizes as specified below). Capacitance ranges available based on the numerical values in E12 series under JIS. Ideally suited for use of switching power supplies. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). UPJ Smaller UPS Specifications Item Performance Characteristics –55 to +105˚C (6.3 to 100V), –40 to +105˚C (160 to 400V), –25 to +105˚C (450V) 6.3 to 450V 1 to 15000µF ± 20% at 120Hz, 20˚C Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Rated Voltage (V) Leakage Current 6.3 to 100 After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.03CV or 4 (µA), whichever is greater. Leakage current 160 to 450 After 1 minute's application of rated voltage at 20°C, CV < = 1000 : I = 0.1CV+40 (µA) or less. CV > 1000 : I = 0.04CV+100 (µA) or less. 120Hz, 20˚C 6.3 0.22 Rated Voltage (V) tan δ (MAX.) Tangent of loss angle (tan δ) 10 0.19 16 0.16 25 0.14 35 0.12 50 0.10 63 to 100 160 to 350 400 • 450 0.08 0.20 0.25 For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Stability at Low Temperature Rated voltage (V) Z–25˚C / Z+20˚C Impedance Z–40˚C / Z+20˚C ratio (MAX.) Z–55˚C / Z+20˚C 16 — — 3 6.3 • 10 — — 4 25 • 35 — — 3 The specifications listed below shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied at 105°C for the condition listed at right.The peak voltage shall not exceed the rated voltage. Endurance Capacitance change tan δ Leakage current Marking 250 — 6 — φD(mm) Rated Voltage 6.3〜450V 120Hz 450 15 — — 400 — 10 — 315 • 350 — 8 — φ 5, φ 6.3 φ8 > = φ10 2000hrs. 3000hrs. 5000hrs. Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed at right. Printed with white color letter on dark brown sleeve. Shelf Life 50 to 100 160 • 200 — — — 4 2 — Capacitance change Within ±20% of the initial capacitance value tan δ 150% or less than the initial specified value Leakage current Less than or equal to the initial specified value Frequency coefficient of rated ripple current Radial Lead Type Sleeve (P.E.T.) φd Rated voltage Frequency coefficient 15000 6800 P ±0.5 φD+0.5 MAX. 10000 4700 3300 2200 Pressure relief vent 1500 L + MAX. (φ6.3up) 15MIN 4MIN 1000 680 (mm) (φD < 8) 1.0 (φD 8) 1.5 470 φD 5 6.3 8 10 12.5 16 18 P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 6.3 to 100V φd 0.5 0.5 0.6 0.6 0.6 0.8 0.8 (10kHz to 200kHz = 1) 330 150 Cap.(µF) In case L >25 for the φ12.5 dia. unit, lead dia. φ d=0.8mm. 220 Please refer to the Guidelines for Aluminum Electrolytic Capacitors for end seal configuration information. 100 68 47 33 Type numbering system (Example : 25V 470µF) 120Hz 22 300Hz 1kHz 15 1 2 3 4 5 6 7 8 9 10 Type 11 12 Configuration Capacitance tolerance (±20%) Rated capacitance (470µF) Rated voltage (25V) Series name Type Dimension table in next page. Code Small Dia Low Profile U P J 1 E 4 7 1 M PD 10 2.2 6 Size code 0 Configuration φD 5 6.3 8 • 10 12.5 to 18 Pb-free leadwire Pb-free PET sleeve DD 160 to 450V 0.5 0.6 0.7 0.8 Frequency coefficient 0.9 1.0 50Hz 120Hz 300Hz 1kHz 10kHz or more 0.80 1.00 1.25 1.40 1.60 ED PD HD CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UPJ Dimensions Rated Voltage （V） （code） 6.3 （0J） Impedance（Ω） MAX. Rated Ripple （mArms） Leakage Current （µA） at 20℃ after 1 minute 20℃/ 100kHz －10℃/ 100kHz 105℃/ 10 to 200kHz 0.22 18.9 1.40 3.50 150 99 UPJ0J101MDD 0.22 22.68 1.10 2.80 175 115 UPJ0J121MDD 6.3×11 0.22 28.35 0.78 2.10 225 155 UPJ0J151MED 6.3×11 0.22 34.02 0.60 1.50 250 175 UPJ0J181MED 220 6.3×11 0.22 41.58 0.48 1.20 285 205 UPJ0J221MED 270 6.3×15 0.22 51.03 0.39 1.00 370 275 UPJ0J271MED 330 6.3×15 0.22 62.37 0.32 0.80 405 310 UPJ0J331MED Rated Capacitance （µF） Case Size φD×L（mm） tan δ 100 5× 11 120 5×11 150 180 （ ） 105℃/ 120Hz Part Number 390 8× 11.5 0.22 73.71 0.27 0.68 445 345 UPJ0J391MPD 470 8× 15 0.22 88.83 0.22 0.55 550 435 UPJ0J471MPD 470 10× 12.5 0.22 88.83 0.23 0.58 575 455 UPJ0J471MPD6 560 8× 15 0.22 105.84 0.19 0.48 595 480 UPJ0J561MPD 560 10× 12.5 0.22 105.84 0.21 0.53 600 485 UPJ0J561MPD6 680 8× 20 0.22 128.52 0.16 0.40 730 605 UPJ0J681MPD 680 10× 16 0.22 128.52 0.18 0.45 700 580 UPJ0J681MPD6 820 8× 20 0.22 154.98 0.13 0.33 795 670 UPJ0J821MPD 820 10× 16 0.22 154.98 0.15 0.38 750 635 UPJ0J821MPD6 1000 10× 20 0.22 189 0.12 0.30 950 820 UPJ0J102MPD 1000 12.5× 15 0.22 189 0.13 0.33 890 765 UPJ0J102MHD6 1200 10× 20 0.22 226.8 0.10 0.25 1020 895 UPJ0J122MPD 1200 12.5× 15 0.22 226.8 0.12 0.30 950 835 UPJ0J122MHD6 1500 10× 25 0.22 283.5 0.084 0.21 1220 1090 1500 12.5× 15 0.22 283.5 0.10 0.25 1020 915 UPJ0J152MPD UPJ0J152MHD6 1800 10× 31.5 0.22 340.2 0.078 0.20 1370 1230 UPJ0J182MPD 1800 16× 15 0.22 340.2 0.084 0.21 1270 1140 UPJ0J182MHD6 2200 10× 31.5 0.24 415.8 0.066 0.17 1470 1320 UPJ0J222MPD 2200 16× 15 0.24 415.8 0.078 0.20 1340 1200 UPJ0J222MHD6 2700 12.5× 25 0.24 510.3 0.051 0.14 1590 1430 UPJ0J272MHD 2700 18× 15 0.24 510.3 0.072 0.18 1500 1350 UPJ0J272MHD6 3300 12.5× 25 0.26 623.7 0.045 0.11 1710 1530 UPJ0J332MHD 3300 18× 15 0.26 623.7 0.065 0.16 1600 1440 UPJ0J332MHD6 3900 12.5× 31.5 0.26 737.1 0.037 0.093 1910 1710 UPJ0J392MHD 3900 16× 20 0.26 737.1 0.056 0.14 1720 1540 UPJ0J392MHD6 4700 12.5× 35.5 0.28 888.3 0.034 0.085 2100 1890 UPJ0J472MHD 4700 18× 20 0.28 888.3 0.050 0.13 1920 1720 UPJ0J472MHD6 5600 12.5×40 0.30 1058.4 0.031 0.078 2270 2040 UPJ0J562MHD 5600 18×20 0.30 1058.4 0.047 0.12 1980 1780 UPJ0J562MHD6 6800 16×31.5 0.32 1285.2 0.029 0.073 2370 2130 UPJ0J682MHD 6800 18×25 0.32 1285.2 0.039 0.098 2210 1980 UPJ0J682MHD6 8200 16×35.5 0.36 1549.8 0.027 0.068 2550 2290 UPJ0J822MHD 18×31.5 0.36 1549.8 0.031 0.078 2390 2150 UPJ0J822MHD6 10000 8200 16× 40 0.40 1890 0.025 0.063 2750 2470 UPJ0J103MHD 10000 18× 31.5 0.40 1890 0.028 0.070 2490 2240 UPJ0J103MHD6 12000 18× 35.5 0.44 2268 0.023 0.058 2820 2530 UPJ0J123MHD 15000 18× 40 0.50 2835 0.022 0.055 2960 2660 UPJ0J153MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UPJ Dimensions Rated Voltage （V） （code） 10 （1A） Rated Capacitance （µF） Case Size φD×L（mm） tan δ 68 5× 11 0.19 82 5× 11 0.19 100 6.3× 11 120 6.3× 11 150 180 Leakage Current （µA） at 20℃ after 1 minute Impedance（Ω） MAX. Rated Ripple （mArms） Part Number 20℃/ 100kHz －10℃/ 100kHz 105℃/ 10 to 200kHz 20.4 1.30 3.30 155 97 UPJ1A680MDD 24.6 1.10 2.80 175 110 UPJ1A820MDD 0.19 30 0.84 2.10 210 135 UPJ1A101MED 0.19 36 0.72 1.80 235 160 UPJ1A121MED 6.3× 11 0.19 45 0.55 1.40 265 185 UPJ1A151MED 6.3× 11 0.19 54 0.46 1.20 290 205 UPJ1A181MED 220 6.3× 15 0.19 66 0.38 0.95 370 270 UPJ1A221MED 270 6.3× 15 （ ） 105℃/ 120Hz 0.19 81 0.31 0.78 405 300 UPJ1A271MED 330 8× 11.5 0.19 99 0.26 0.65 460 350 UPJ1A331MPD 390 8× 15 0.19 117 0.22 0.55 550 430 UPJ1A391MPD 390 10× 12.5 0.19 117 0.24 0.60 555 430 UPJ1A391MPD6 470 8×15 0.19 141 0.19 0.48 595 475 UPJ1A471MPD 470 10× 12.5 0.19 141 0.21 0.53 600 475 UPJ1A471MPD6 560 8×20 0.19 168 0.16 0.40 730 590 UPJ1A561MPD 560 10× 16 0.19 168 0.18 0.45 700 565 UPJ1A561MPD6 680 8× 20 0.19 204 0.13 0.33 795 660 UPJ1A681MPD 680 10× 16 0.19 204 0.14 0.35 770 635 UPJ1A681MPD6 820 10× 20 0.19 246 0.11 0.28 985 835 UPJ1A821MPD 820 12.5× 15 0.19 246 0.13 0.33 920 780 UPJ1A821MHD6 1000 10× 20 0.19 300 0.096 0.24 1060 915 UPJ1A102MPD 1000 12.5× 15 0.19 300 0.10 0.25 1040 895 UPJ1A102MHD6 1200 10× 25 0.19 360 0.078 0.20 1280 1120 1200 12.5× 15 0.19 360 0.096 0.24 1060 930 UPJ1A122MPD UPJ1A122MHD6 1500 10× 31.5 0.19 450 0.072 0.18 1440 1290 UPJ1A152MPD 1500 16× 15 0.19 450 0.078 0.20 1330 1190 UPJ1A152MHD6 1800 12.5×20 0.19 540 0.057 0.14 1470 1320 UPJ1A182MHD 1800 16× 15 0.19 540 0.072 0.18 1420 1270 UPJ1A182MHD6 2200 12.5×25 0.21 660 0.045 0.11 1710 1530 UPJ1A222MHD 2200 18× 15 0.21 660 0.060 0.15 1600 1440 UPJ1A222MHD6 2700 12.5× 31.5 0.21 810 0.036 0.09 1940 1740 UPJ1A272MHD 2700 16× 20 0.21 810 0.051 0.13 1740 1560 UPJ1A272MHD6 3300 12.5× 35.5 0.23 990 0.032 0.08 2180 1960 UPJ1A332MHD 3300 16× 20 0.23 990 0.045 0.11 1850 1660 UPJ1A332MHD6 3900 12.5× 40 0.23 1170 0.030 0.075 2360 2120 UPJ1A392MHD 3900 18×20 0.23 1170 0.041 0.10 2050 1840 UPJ1A392MHD6 4700 16×31.5 0.25 1410 0.028 0.070 2420 2170 UPJ1A472MHD 4700 18×25 0.25 1410 0.035 0.088 2250 2020 UPJ1A472MHD6 5600 16×35.5 0.27 1680 0.026 0.065 2610 2340 UPJ1A562MHD 5600 18×25 0.27 1680 0.033 0.083 2340 2100 UPJ1A562MHD6 6800 16×35.5 0.29 2040 0.024 0.060 2680 2410 UPJ1A682MHD 6800 18×31.5 0.29 2040 0.027 0.068 2540 2280 UPJ1A682MHD6 8200 16×40 0.33 2460 0.023 0.058 2820 2530 UPJ1A822MHD 18×35.5 0.33 2460 0.025 0.063 2690 2420 UPJ1A822MHD6 18× 40 0.37 3000 0.021 0.053 3040 2730 UPJ1A103MHD 8200 10000 For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UPJ Dimensions Rated Voltage （V） （code） Rated Capacitance （µF） Case Size φD×L（mm） tan δ 47 5× 11 0.16 56 5× 11 0.16 68 6.3×11 82 6.3×11 100 6.3× 11 Impedance（Ω） MAX. Rated Ripple （mArms） Part Number 20℃/ 100kHz －10℃/ 100kHz 105℃/ 10 to 200kHz 22.56 1.30 3.30 155 92 UPJ1C470MDD 26.88 1.10 2.80 175 105 UPJ1C560MDD 0.16 32.64 0.78 2.00 220 135 UPJ1C680MED 0.16 39.36 0.66 1.70 240 155 UPJ1C820MED 0.16 48 0.55 1.40 265 175 UPJ1C101MED （ ） 105℃/ 120Hz 120 6.3× 11 0.16 57.6 0.45 1.10 290 195 UPJ1C121MED 150 6.3× 15 0.16 72 0.37 0.93 375 260 UPJ1C151MED 180 6.3× 15 0.16 86.4 0.31 0.78 405 285 UPJ1C181MED 0.16 105.6 0.26 0.65 460 335 UPJ1C221MPD 220 16 （1C） Leakage Current （µA） at 20℃ after 1 minute 8× 11.5 270 8× 15 0.16 129.6 0.22 0.55 550 410 UPJ1C271MPD 270 10× 12.5 0.16 129.6 0.22 0.55 575 430 UPJ1C271MPD6 330 8×15 0.16 158.4 0.18 0.45 595 455 UPJ1C331MPD 330 10× 12.5 0.16 158.4 0.18 0.45 625 480 UPJ1C331MPD6 390 8× 20 0.16 187.2 0.16 0.40 730 570 UPJ1C391MPD 390 10× 16 0.16 187.2 0.16 0.40 730 570 UPJ1C391MPD6 UPJ1C471MPD 470 8× 20 0.16 225.6 0.14 0.35 770 615 470 10× 16 0.16 225.6 0.14 0.35 770 615 UPJ1C471MPD6 560 10× 20 0.16 268.8 0.12 0.30 950 770 UPJ1C561MPD 560 12.5× 15 0.16 268.8 0.13 0.33 920 745 UPJ1C561MHD6 680 10×20 0.16 326.4 0.10 0.25 1020 845 UPJ1C681MPD 680 12.5× 15 0.16 326.4 0.11 0.28 985 815 UPJ1C681MHD6 820 10× 25 0.16 393.6 0.084 0.21 1220 1030 820 12.5× 15 UPJ1C821MPD 0.16 393.6 0.096 0.24 1060 895 1000 10× 31.5 0.16 480 0.072 0.18 1410 1210 UPJ1C821MHD6 UPJ1C102MPD 1000 16× 15 0.16 480 0.084 0.21 1270 1090 UPJ1C102MHD6 1200 12.5× 20 0.16 576 0.060 0.15 1430 1250 UPJ1C122MHD 1200 16× 15 0.16 576 0.072 0.18 1390 1220 UPJ1C122MHD6 1500 12.5× 25 0.16 720 0.048 0.12 1660 1490 UPJ1C152MHD 1500 18× 15 0.16 720 0.066 0.17 1560 1400 UPJ1C152MHD6 1800 12.5× 31.5 0.16 864 0.039 0.10 1880 1690 UPJ1C182MHD 1800 16× 20 0.16 864 0.054 0.14 1700 1530 UPJ1C182MHD6 2200 12.5× 31.5 0.18 1056 0.034 0.085 2010 1800 UPJ1C222MHD 2200 16× 20 0.18 1056 0.048 0.12 1800 1620 UPJ1C222MHD6 2700 12.5× 35.5 0.18 1296 0.031 0.078 2220 1990 UPJ1C272MHD 2700 16× 25 0.18 1296 0.040 0.10 2010 1800 UPJ1C272MHD6 3300 12.5×40 0.20 1584 0.028 0.07 2410 2160 UPJ1C332MHD 3300 18× 20 0.20 1584 0.039 0.10 2090 1880 UPJ1C332MHD6 3900 16× 31.5 0.20 1872 0.027 0.068 2470 2220 UPJ1C392MHD 3900 18× 25 0.20 1872 0.034 0.085 2290 2060 UPJ1C392MHD6 4700 16× 35.5 0.22 2256 0.025 0.063 2680 2410 UPJ1C472MHD 4700 18× 31.5 0.22 2256 0.028 0.070 2490 2240 UPJ1C472MHD6 5600 16× 40 0.24 2688 0.024 0.060 2820 2530 UPJ1C562MHD 5600 18× 35.5 0.24 2688 0.027 0.068 2620 2350 UPJ1C562MHD6 6800 18× 35.5 0.26 3264 0.022 0.055 2900 2610 UPJ1C682MHD 8200 18× 40 0.30 3936 0.021 0.053 3040 2730 UPJ1C822MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UPJ Dimensions Rated Voltage （V） （code） 25 （1E） Rated Capacitance （µF） Case Size φD×L（mm） tan δ 33 5× 11 0.14 39 5× 11 0.14 47 6.3× 11 56 6.3× 11 68 82 Leakage Current （µA） at 20℃ after 1 minute Impedance（Ω） MAX. Rated Ripple （mArms） Part Number 20℃/ 100kHz －10℃/ 100kHz 105℃/ 10 to 200kHz 24.75 1.30 3.30 155 88 UPJ1E330MDD 29.25 1.10 2.80 175 100 UPJ1E390MDD 0.14 35.25 0.84 2.10 210 125 UPJ1E470MED 0.14 42 0.72 1.80 235 140 UPJ1E560MED 6.3× 11 0.14 51 0.57 1.40 260 160 UPJ1E680MED 6.3× 11 0.14 61.5 0.47 1.20 285 180 UPJ1E820MED 100 6.3× 15 0.14 75 0.39 0.98 370 245 UPJ1E101MED 120 6.3× 15 （ ） 105℃/ 120Hz 0.14 90 0.32 0.80 405 275 UPJ1E121MED 150 8× 11.5 0.14 112.5 0.26 0.65 460 320 UPJ1E151MPD 180 8× 15 0.14 135 0.22 0.55 550 390 UPJ1E181MPD 180 10×12.5 0.14 135 0.24 0.60 555 395 UPJ1E181MPD6 220 8× 15 0.14 165 0.18 0.45 625 455 UPJ1E221MPD 220 10× 12.5 0.14 165 0.21 0.53 600 435 UPJ1E221MPD6 270 8× 20 0.14 202.5 0.15 0.38 750 560 UPJ1E271MPD 270 10× 16 0.14 202.5 0.18 0.45 700 525 UPJ1E271MPD6 330 8× 20 0.14 247.5 0.13 0.33 795 610 UPJ1E331MPD 330 10× 16 0.14 247.5 0.15 0.38 750 575 UPJ1E331MPD6 390 10× 20 0.14 292.5 0.11 0.28 985 770 UPJ1E391MPD 390 12.5×15 0.14 292.5 0.13 0.33 920 720 UPJ1E391MHD6 470 10× 20 0.14 352.5 0.10 0.25 1020 810 UPJ1E471MPD 470 12.5× 15 0.14 352.5 0.11 0.28 985 785 UPJ1E471MHD6 560 10× 25 0.14 420 0.084 0.21 1220 990 UPJ1E561MPD 560 12.5× 15 0.14 420 0.10 0.25 1060 860 UPJ1E561MHD6 680 10× 31.5 0.14 510 0.072 0.18 1420 1180 UPJ1E681MPD 680 16× 15 0.14 510 0.084 0.21 1270 1050 UPJ1E681MHD6 820 12.5× 20 0.14 615 0.059 0.15 1430 1210 UPJ1E821MHD 820 16×15 0.14 615 0.079 0.20 1340 1130 UPJ1E821MHD6 1000 12.5× 25 0.14 750 0.048 0.12 1660 1430 UPJ1E102MHD 1000 18× 15 0.14 750 0.066 0.17 1520 1310 UPJ1E102MHD6 1200 12.5× 25 0.14 900 0.043 0.11 1760 1550 UPJ1E122MHD 1200 18× 15 0.14 900 0.061 0.15 1600 1400 UPJ1E122MHD6 1500 12.5× 31.5 0.14 1125 0.035 0.088 1980 1780 UPJ1E152MHD 1500 16× 20 0.14 1125 0.050 0.13 1770 1590 UPJ1E152MHD6 1800 12.5× 35.5 0.14 1350 0.032 0.08 2180 1960 UPJ1E182MHD 1800 16× 25 0.14 1350 0.041 0.10 1980 1780 UPJ1E182MHD6 2200 12.5×40 0.16 1650 0.029 0.073 2360 2120 UPJ1E222MHD 2200 18× 20 0.16 1650 0.040 0.10 2050 1840 UPJ1E222MHD6 2700 16× 31.5 0.16 2025 0.027 0.068 2470 2220 UPJ1E272MHD 2700 18× 25 0.16 2025 0.034 0.085 2290 2060 UPJ1E272MHD6 3300 16× 35.5 0.18 2475 0.025 0.063 2680 2410 UPJ1E332MHD 3300 18× 31.5 0.18 2475 0.029 0.073 2490 2240 UPJ1E332MHD6 3900 16× 40 0.18 2925 0.023 0.058 2820 2530 UPJ1E392MHD 3900 18× 35.5 0.18 2925 0.026 0.065 2690 2420 UPJ1E392MHD6 4700 18× 40 0.20 3525 0.022 0.055 2960 2660 UPJ1E472MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UPJ Dimensions Rated Voltage （V） （code） 35 （1V） Impedance（Ω） MAX. Rated Ripple （mArms） Leakage Current （µA） at 20℃ after 1 minute 20℃/ 100kHz －10℃/ 100kHz 105℃/ 10 to 200kHz 0.12 23.1 1.30 3.30 160 85 UPJ1V220MDD 0.12 28.35 1.00 2.50 180 99 UPJ1V270MDD 6.3×11 0.12 34.65 0.78 2.00 225 125 UPJ1V330MED 6.3×11 0.12 40.95 0.66 1.70 245 140 UPJ1V390MED 47 6.3×11 0.12 49.35 0.54 1.40 270 160 UPJ1V470MED 56 6.3×11 0.12 58.8 0.45 1.10 295 180 UPJ1V560MED 68 6.3×15 0.12 71.4 0.37 0.93 370 230 UPJ1V680MED 82 6.3×15 86.1 Rated Capacitance （µF） Case Size φD×L（mm） tan δ 22 5× 11 27 5× 11 33 39 0.12 （ ） 105℃/ 120Hz Part Number 0.31 0.78 415 265 UPJ1V820MED 100 8× 11.5 0.12 105 0.26 0.65 460 305 UPJ1V101MPD 120 8× 15 0.12 126 0.22 0.55 550 370 UPJ1V121MPD 120 10× 12.5 0.12 126 0.24 0.60 555 375 UPJ1V121MPD6 150 8× 15 0.12 157.5 0.18 0.45 595 415 UPJ1V151MPD 150 10× 12.5 0.12 157.5 0.20 0.50 625 435 UPJ1V151MPD6 180 8× 20 0.12 189 0.16 0.40 730 520 UPJ1V181MPD 180 10× 16 0.12 189 0.18 0.45 700 500 UPJ1V181MPD6 UPJ1V221MPD 220 8×20 0.12 231 0.13 0.33 795 580 220 10× 16 0.12 231 0.14 0.35 770 560 UPJ1V221MPD6 270 10× 20 0.12 283.5 0.11 0.28 985 735 UPJ1V271MPD 270 12.5× 15 0.12 283.5 0.13 0.33 920 690 UPJ1V271MHD6 330 10× 20 0.12 346.5 0.096 0.24 1060 810 UPJ1V331MPD 330 12.5× 15 0.12 346.5 0.10 0.25 1020 780 UPJ1V331MHD6 390 10× 25 0.12 409.5 0.084 0.21 1220 955 UPJ1V391MPD 390 12.5× 15 0.12 409.5 0.096 0.24 1060 825 UPJ1V391MHD6 470 10×31.5 0.12 493.5 0.072 0.18 1420 1130 470 16× 15 0.12 493.5 0.084 0.21 1270 1010 UPJ1V471MPD UPJ1V471MHD6 560 12.5× 20 0.12 588 0.059 0.15 1430 1160 UPJ1V561MHD 560 16× 15 0.12 588 0.075 0.19 1360 1100 UPJ1V561MHD6 680 12.5× 25 0.12 714 0.048 0.12 1660 1370 UPJ1V681MHD 680 18× 15 0.12 714 0.066 0.17 1540 1270 UPJ1V681MHD6 820 12.5× 25 0.12 861 0.042 0.11 1760 1490 UPJ1V821MHD 820 18× 15 0.12 861 0.060 0.15 1620 1370 UPJ1V821MHD6 1000 12.5× 31.5 0.12 1050 0.035 0.088 1980 1710 UPJ1V102MHD 1000 16× 20 0.12 1050 0.050 0.13 1770 1530 UPJ1V102MHD6 1200 12.5×35.5 0.12 1260 0.031 0.078 2180 1920 UPJ1V122MHD 1200 16× 25 0.12 1260 0.041 0.10 1980 1740 UPJ1V122MHD6 1500 12.5×40 0.12 1575 0.029 0.073 2360 2120 UPJ1V152MHD 1500 18× 20 0.12 1575 0.040 0.10 2050 1840 UPJ1V152MHD6 1800 16× 31.5 0.12 1890 0.027 0.068 2470 2220 UPJ1V182MHD 1800 18× 25 0.12 1890 0.034 0.085 2290 2060 UPJ1V182MHD6 2200 16× 35.5 0.14 2310 0.024 0.060 2680 2410 UPJ1V222MHD 2200 18× 31.5 0.14 2310 0.028 0.070 2490 2240 UPJ1V222MHD6 2700 16× 40 0.14 2835 0.022 0.055 2900 2610 UPJ1V272MHD 2700 18× 35.5 0.14 2835 0.026 0.065 2690 2420 UPJ1V272MHD6 3300 18× 40 0.16 3465 0.021 0.053 3040 2730 UPJ1V332MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UPJ Dimensions Rated Voltage （V） （code） 50 （1H） Impedance（Ω） MAX. Rated Ripple （mArms） Leakage Current （µA） at 20℃ after 1 minute 20℃/ 100kHz 0.10 4 6.50 18.00 54 27 UPJ1H2R2MDD 0.10 4.95 4.60 12.00 66 33 UPJ1H3R3MDD 5× 11 0.10 7.05 3.10 7.80 81 40 UPJ1H4R7MDD 5× 11 0.10 10.2 2.50 6.30 91 45 UPJ1H6R8MDD 10 5× 11 0.10 15 2.00 5.00 115 57 UPJ1H100MDD 12 5× 11 0.10 18 1.70 4.30 125 62 UPJ1H120MDD 15 5× 11 0.10 22.5 1.30 3.30 145 72 UPJ1H150MDD 18 5× 11 0.10 27 1.10 2.80 155 79 UPJ1H180MDD 22 6.3× 11 0.10 33 0.91 2.30 195 100 UPJ1H220MED 27 6.3× 11 0.10 40.5 0.74 1.90 215 115 UPJ1H270MED 33 6.3× 11 0.10 49.5 0.60 1.50 240 135 UPJ1H330MED 39 6.3× 11 0.10 58.5 0.50 1.30 260 150 UPJ1H390MED 47 6.3× 15 0.10 70.5 0.42 1.10 330 195 UPJ1H470MED 56 6.3×15 0.10 84 0.35 0.88 360 220 UPJ1H560MED Rated Capacitance （µF） Case Size φD×L（mm） tan δ 2.2 5× 11 3.3 5× 11 4.7 6.8 （ ） －10℃/ 100kHz 105℃/ 10 to 200kHz 105℃/ 120Hz Part Number 68 8× 11.5 0.10 102 0.28 0.70 410 255 UPJ1H680MPD 82 8× 15 0.10 123 0.22 0.55 500 320 UPJ1H820MPD 82 10×12.5 0.10 123 0.23 0.58 510 330 UPJ1H820MPD6 100 8×20 0.10 150 0.18 0.45 620 410 UPJ1H101MPD 100 10× 16 0.10 150 0.21 0.53 580 385 UPJ1H101MPD6 120 8× 20 0.10 180 0.16 0.40 670 455 UPJ1H121MPD 120 10× 16 0.10 180 0.17 0.43 640 435 UPJ1H121MPD6 150 10× 20 0.10 225 0.13 0.33 820 570 UPJ1H151MPD 150 12.5×15 0.10 225 0.14 0.35 785 545 UPJ1H151MHD6 180 10× 20 0.10 270 0.11 0.28 890 635 UPJ1H181MPD 180 12.5× 15 0.10 270 0.12 0.31 845 605 UPJ1H181MHD6 220 10× 25 0.10 330 0.098 0.25 1040 760 UPJ1H221MPD 220 12.5× 15 0.10 330 0.10 0.25 920 670 UPJ1H221MHD6 0.10 405 0.085 0.21 1200 900 UPJ1H271MPD UPJ1H271MHD6 270 10× 31.5 270 16×15 0.10 405 0.091 0.23 1120 840 330 10× 31.5 0.10 495 0.072 0.18 1300 995 UPJ1H331MPD 330 16× 15 0.10 495 0.078 0.20 1210 925 UPJ1H331MHD6 UPJ1H391MHD 390 12.5× 25 0.10 585 0.053 0.13 1440 1120 390 16× 15 0.10 585 0.072 0.18 1270 990 UPJ1H391MHD6 470 12.5× 25 0.10 705 0.048 0.12 1500 1190 UPJ1H471MHD 470 18× 15 0.10 705 0.060 0.15 1470 1170 UPJ1H471MHD6 560 12.5×31.5 0.10 840 0.040 0.10 1680 1360 UPJ1H561MHD UPJ1H561MHD6 560 16×20 0.10 840 0.053 0.13 1550 1260 680 12.5× 35.5 0.10 1020 0.036 0.09 1850 1530 UPJ1H681MHD 680 16× 20 0.10 1020 0.048 0.12 1630 1350 UPJ1H681MHD6 820 12.5× 40 0.10 1230 0.033 0.083 2010 1700 UPJ1H821MHD 820 18× 20 0.10 1230 0.043 0.11 1810 1530 UPJ1H821MHD6 1000 16× 31.5 0.10 1500 0.030 0.075 2120 1830 UPJ1H102MHD 1000 18× 25 0.10 1500 0.036 0.090 2000 1730 UPJ1H102MHD6 UPJ1H122MHD 1200 16×35.5 0.10 1800 0.028 0.070 2260 1990 1200 18× 31.5 0.10 1800 0.031 0.078 2140 1880 UPJ1H122MHD6 1500 16× 40 0.10 2250 0.026 0.065 2410 2170 UPJ1H152MHD 1500 18 ×31.5 0.10 2250 0.029 0.073 2220 1990 UPJ1H152MHD6 1800 18×35.5 0.10 2700 0.025 0.063 2460 2210 UPJ1H182MHD 2200 18×40 0.12 3300 0.024 0.060 2560 2300 UPJ1H222MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UPJ Dimensions Rated Voltage （V） （code） Rated Ripple （mArms） 20℃/ 100kHz －10℃/ 100kHz 105℃/ 10 to 200kHz 0.08 18.9 1.60 4.00 135 67 UPJ1J100MDD 5× 11 0.08 22.68 1.40 3.50 145 72 UPJ1J120MDD 6.3×11 0.08 28.35 1.10 2.80 185 92 UPJ1J150MED 6.3×11 0.08 34.02 0.95 2.40 195 100 UPJ1J180MED 6.3×11 0.08 41.58 0.78 2.00 215 110 UPJ1J220MED 27 6.3×11 0.08 51.03 0.64 1.60 240 130 UPJ1J270MED 33 6.3×15 0.08 62.37 0.52 1.30 305 170 UPJ1J330MED 39 6.3×15 Case Size φD×L（mm） tan δ 5× 11 12 15 18 22 10 47 63 （1J） Impedance（Ω） MAX. Leakage Current （µA） at 20℃ after 1 minute Rated Capacitance （µF） （ ） 105℃/ 120Hz Part Number 0.08 73.71 0.45 1.10 330 190 UPJ1J390MED 8× 11.5 0.08 88.83 0.37 0.93 365 215 UPJ1J470MPD 56 8× 15 0.08 105.84 0.31 0.78 450 275 UPJ1J560MPD 56 10× 12.5 0.08 105.84 0.34 0.85 450 275 UPJ1J560MPD6 68 8× 15 0.08 128.52 0.26 0.65 500 315 UPJ1J680MPD 68 10× 12.5 0.08 128.52 0.28 0.70 495 310 UPJ1J680MPD6 82 8× 20 0.08 154.98 0.22 0.55 600 385 UPJ1J820MPD 82 10× 16 0.08 154.98 0.24 0.60 580 375 UPJ1J820MPD6 100 10× 20 0.08 189 0.18 0.45 750 495 UPJ1J101MPD 100 12.5× 15 0.08 189 0.20 0.50 695 460 UPJ1J101MHD6 120 10× 20 0.08 226.8 0.15 0.38 820 555 UPJ1J121MPD 120 12.5× 15 0.08 226.8 0.18 0.45 750 510 UPJ1J121MHD6 150 10× 25 0.08 283.5 0.13 0.33 950 665 UPJ1J151MPD 150 12.5×15 0.08 283.5 0.14 0.35 845 590 UPJ1J151MHD6 10× 31.5 0.08 340.2 0.11 0.28 1110 790 UPJ1J181MPD 180 16× 15 0.08 340.2 0.12 0.30 1050 750 UPJ1J181MHD6 220 12.5×20 0.08 415.8 0.094 0.24 1140 835 UPJ1J221MHD 220 16× 15 0.08 415.8 0.10 0.25 1120 820 UPJ1J221MHD6 270 12.5× 25 0.08 510.3 0.081 0.20 1340 1000 UPJ1J271MHD 270 18× 15 0.08 510.3 0.088 0.22 1290 965 UPJ1J271MHD6 330 12.5× 25 0.08 623.7 0.072 0.18 1420 1090 UPJ1J331MHD 330 18× 15 0.08 623.7 0.078 0.20 1410 1080 UPJ1J331MHD6 180 390 12.5×31.5 0.08 737.1 0.059 0.15 1620 1260 UPJ1J391MHD 390 16× 20 0.08 737.1 0.070 0.18 1500 1170 UPJ1J391MHD6 470 12.5×35.5 0.08 888.3 0.052 0.13 1780 1420 UPJ1J471MHD 470 16× 25 0.08 888.3 0.063 0.16 1700 1350 UPJ1J471MHD6 560 12.5× 40 0.08 1058.4 0.047 0.12 1950 1580 UPJ1J561MHD 560 18× 20 0.08 1058.4 0.058 0.15 1730 1400 UPJ1J561MHD6 680 16× 31.5 0.08 1285.2 0.043 0.11 2050 1700 UPJ1J681MHD 680 18× 25 0.08 1285.2 0.051 0.13 1940 1610 UPJ1J681MHD6 820 16× 35.5 0.08 1549.8 0.040 0.10 2220 1880 UPJ1J821MHD 820 18× 31.5 0.08 1549.8 0.043 0.12 2110 1780 UPJ1J821MHD6 16× 40 0.08 1890 0.037 0.093 2370 2050 UPJ1J102MHD 1000 1000 18×35.5 0.08 1890 0.040 0.10 2280 1970 UPJ1J102MHD6 1200 18×40 0.08 2268 0.034 0.085 2510 2210 UPJ1J122MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UPJ Dimensions Rated Voltage （V） （code） 80 （1K） Rated Capacitance （µF） Leakage Current （µA） at 20℃ after 1 minute Impedance（Ω） MAX. Rated Ripple （mArms） Case Size φD×L（mm） tan δ 4.7 5× 11 0.08 11.28 4.20 11.00 53 26 UPJ1K4R7MDD 6.8 5× 11 0.08 16.32 2.60 7.00 68 34 UPJ1K6R8MDD 10 6.3× 11 0.08 24 1.70 4.60 87 43 UPJ1K100MED 12 6.3× 11 0.08 28.8 1.40 3.80 96 48 UPJ1K120MED 15 6.3× 11 0.08 36 1.20 3.20 104 52 UPJ1K150MED 18 6.3× 11 0.08 43.2 1.00 2.70 114 58 UPJ1K180MED 22 6.3× 15 0.08 52.8 0.77 2.10 135 71 UPJ1K220MED 27 6.3× 15 0.08 64.8 0.63 1.70 149 80 UPJ1K270MED （ ） 20℃/ 100kHz －10℃/ 100kHz 105℃/ 10 to 200kHz 105℃/ 120Hz Part Number 33 8× 11.5 0.08 79.2 0.53 1.40 234 132 UPJ1K330MPD 39 8× 15 0.08 93.6 0.46 1.20 272 156 UPJ1K390MPD 39 10× 12.5 0.08 93.6 0.49 1.30 271 155 UPJ1K390MPD6 47 8× 15 0.08 112.8 0.39 1.10 295 175 UPJ1K470MPD 47 10× 12.5 0.08 112.8 0.42 1.10 293 174 UPJ1K470MPD6 56 8× 20 0.08 134.4 0.34 0.92 347 208 UPJ1K560MPD 56 10× 16 0.08 134.4 0.36 0.97 337 202 UPJ1K560MPD6 68 10× 20 0.08 163.2 0.28 0.76 426 264 UPJ1K680MPD 68 12.5× 15 0.08 163.2 0.31 0.84 402 249 UPJ1K680MHD6 82 10× 20 0.08 196.8 0.25 0.68 447 284 UPJ1K820MPD 82 12.5× 15 0.08 196.8 0.27 0.73 430 273 UPJ1K820MHD6 UPJ1K101MPD 100 10× 25 0.08 240 0.21 0.57 526 347 100 12.5× 15 0.08 240 0.23 0.62 466 308 UPJ1K101MHD6 0.08 288 0.18 0.49 606 406 UPJ1K121MPD 120 10× 31.5 120 16× 15 0.08 288 0.20 0.54 663 444 UPJ1K121MHD6 150 10×31.5 0.08 360 0.15 0.41 663 459 UPJ1K151MPD 150 16× 15 0.08 360 0.18 0.47 699 484 UPJ1K151MHD6 180 12.5× 25 0.08 432 0.13 0.35 734 520 UPJ1K181MHD 180 16× 15 0.08 432 0.15 0.41 766 543 UPJ1K181MHD6 220 12.5× 31.5 0.08 528 0.12 0.32 816 595 UPJ1K221MHD 220 18× 15 0.08 528 0.13 0.35 881 643 UPJ1K221MHD6 270 12.5×31.5 0.08 648 0.10 0.27 894 667 UPJ1K271MHD 270 16× 20 0.08 648 0.11 0.30 995 742 UPJ1K271MHD6 330 12.5×35.5 0.08 792 0.088 0.24 1000 767 UPJ1K331MHD 330 16× 25 0.08 792 0.099 0.27 1140 874 UPJ1K331MHD6 390 12.5× 40 0.08 936 0.078 0.21 1060 822 UPJ1K391MHD 390 18×20 0.08 936 0.089 0.24 1170 908 UPJ1K391MHD6 470 16× 31.5 0.08 1128 0.069 0.19 1450 1150 UPJ1K471MHD 470 18×25 0.08 1128 0.080 0.22 1330 1060 UPJ1K471MHD6 560 16×35.5 0.08 1344 0.062 0.17 1600 1300 UPJ1K561MHD 560 18× 31.5 0.08 1344 0.072 0.19 1490 1210 UPJ1K561MHD6 680 16× 40 0.08 1632 0.055 0.15 1770 1470 UPJ1K681MHD 680 18 ×31.5 0.08 1632 0.065 0.18 1560 1300 UPJ1K681MHD6 820 1000 18×35.5 0.08 1968 0.049 0.13 1890 1590 UPJ1K821MHD 18× 40 0.08 2400 0.044 0.12 2080 1790 UPJ1K102MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UPJ Dimensions Rated Voltage （V） （code） 100 （2A） Rated Capacitance （µF） Leakage Current （µA） at 20℃ after 1 minute Impedance（Ω） MAX. Rated Ripple （mArms） Case Size φD×L（mm） tan δ 2.2 5× 11 0.08 6.6 6.60 18.00 43 21 UPJ2A2R2MDD 3.3 5×11 0.08 9.9 4.10 11.00 54 27 UPJ2A3R3MDD 4.7 6.3× 11 0.08 14.1 2.80 7.60 68 34 UPJ2A4R7MED 6.8 6.3× 11 0.08 20.4 1.90 5.10 83 41 UPJ2A6R8MED 10 6.3× 11 0.08 30 1.20 3.20 104 52 UPJ2A100MED 12 6.3× 11 0.08 36 1.00 2.70 114 57 UPJ2A120MED 15 6.3× 15 0.08 45 0.81 2.20 131 65 UPJ2A150MED 18 6.3× 15 0.08 54 0.67 1.80 155 80 UPJ2A180MED （ ） 20℃/ 100kHz －10℃/ 100kHz 105℃/ 10 to 200kHz 105℃/ 120Hz Part Number 22 8× 11.5 0.08 66 0.55 1.50 230 122 UPJ2A220MPD 27 8× 15 0.08 81 0.47 1.30 269 146 UPJ2A270MPD 27 10× 12.5 0.08 81 0.50 1.40 268 145 UPJ2A270MPD6 33 8× 15 0.08 99 0.38 1.00 299 169 UPJ2A330MPD 33 10× 12.5 0.08 99 0.42 1.10 293 166 UPJ2A330MPD6 39 8×20 0.08 117 0.33 0.89 352 202 UPJ2A390MPD 39 10× 16 0.08 117 0.36 0.97 337 193 UPJ2A390MPD6 47 10× 20 0.08 141 0.28 0.76 423 252 UPJ2A470MPD 47 12.5× 15 0.08 141 0.31 0.84 402 239 UPJ2A470MHD6 56 10× 20 0.08 168 0.24 0.65 456 274 UPJ2A560MPD 56 12.5× 15 0.08 168 0.27 0.73 430 258 UPJ2A560MHD6 68 10× 25 0.08 204 0.21 0.57 526 326 UPJ2A680MPD 68 12.5×15 0.08 204 0.23 0.62 466 289 UPJ2A680MHD6 0.08 246 0.18 0.49 606 386 UPJ2A820MPD 82 82 10× 31.5 16×15 0.08 246 0.19 0.51 681 433 UPJ2A820MHD6 10× 31.5 0.08 300 0.15 0.41 663 438 UPJ2A101MPD 100 16×15 0.08 300 0.17 0.46 719 475 UPJ2A101MHD6 120 12.5×25 0.08 360 0.13 0.35 774 519 UPJ2A121MHD 100 120 16× 15 0.08 360 0.14 0.38 793 531 UPJ2A121MHD6 150 12.5× 25 0.08 450 0.11 0.30 798 553 UPJ2A151MHD 150 18× 15 0.08 450 0.12 0.32 917 635 UPJ2A151MHD6 180 12.5× 31.5 0.08 540 0.098 0.26 904 641 UPJ2A181MHD 180 16× 20 0.08 540 0.11 0.30 995 706 UPJ2A181MHD6 220 12.5× 35.5 0.08 660 0.087 0.23 1000 730 UPJ2A221MHD 220 16×25 0.08 660 0.093 0.25 1170 854 UPJ2A221MHD6 270 12.5× 40 0.08 810 0.072 0.19 1130 843 UPJ2A271MHD 270 18×20 0.08 810 0.080 0.22 1230 918 UPJ2A271MHD6 330 16× 31.5 0.08 990 0.062 0.17 1520 1160 UPJ2A331MHD 330 18× 25 0.08 990 0.070 0.19 1420 1080 UPJ2A331MHD6 390 16×35.5 0.08 1170 0.053 0.14 1730 1340 UPJ2A391MHD 390 18×31.5 0.08 1170 0.062 0.17 1600 1240 UPJ2A391MHD6 470 16×40 0.08 1410 0.047 0.13 1920 1530 UPJ2A471MHD 470 18× 35.5 0.08 1410 0.056 0.15 1770 1410 UPJ2A471MHD6 560 18× 35.5 0.08 1680 0.041 0.11 2070 1680 UPJ2A561MHD 680 18×40 0.08 2040 0.036 0.097 2300 1910 UPJ2A681MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UPJ Dimensions Rated Voltage （V） （code） 160 （2C） Rated Capacitance （µF） Case Size φD×L（mm） tan δ 1 8 × 11.5 0.20 2.2 8 × 11.5 3.3 10 × 12.5 4.7 56 － 19 UPJ2C010MPD 0.20 75.2 － 30 UPJ2C2R2MPD 0.20 92.8 － 50 UPJ2C3R3MPD 10 × 12.5 0.20 115.2 － 57 UPJ2C4R7MPD 10 10 × 16 0.20 164 － 90 UPJ2C100MPD 22 12.5 × 20 0.20 240.8 － 140 UPJ2C220MHD 33 12.5 × 25 0.20 311.2 － 175 UPJ2C330MHD （ ） 16 × 25 0.20 400.8 － 220 UPJ2C470MHD 100 16 × 35.5 0.20 740 － 330 UPJ2C101MHD 1 8 × 11.5 0.20 60 － 19 UPJ2D010MPD 2.2 8 × 11.5 0.20 84 － 30 UPJ2D2R2MPD 3.3 10 × 12.5 0.20 106 － 50 UPJ2D3R3MPD 4.7 10 × 16 0.20 134 － 60 UPJ2D4R7MPD 10 10 × 20 0.20 180 － 95 UPJ2D100MPD 22 12.5 × 25 0.20 276 － 145 UPJ2D220MHD 33 16 × 25 0.20 364 － 180 UPJ2D330MHD 47 16 × 25 0.20 476 － 220 UPJ2D470MHD 100 18 × 40 0.20 900 － 345 UPJ2D101MHD 8 × 11.5 0.20 65 － 19 UPJ2E010MPD 2.2 10 × 12.5 0.20 95 － 32 UPJ2E2R2MPD 3.3 10 × 16 0.20 122.5 － 52 UPJ2E3R3MPD 4.7 10 × 16 0.20 147 － 60 UPJ2E4R7MPD 10 12.5 × 20 0.20 200 － 98 UPJ2E100MHD 22 16 × 25 0.20 320 － 150 UPJ2E220MHD 33 16 × 25 0.20 430 － 180 UPJ2E330MHD 47 100 1 315 （2F） Part Number 105℃/ 120Hz 1 250 （2E） Rated Ripple （mArms） 105℃/ 10 to 200kHz 47 200 （2D） Leakage Current （µA） at 20℃ after 1 minute 16 × 31.5 0.20 570 － 225 UPJ2E470MHD 18 × 40 0.20 1100 － 345 UPJ2E101MHD 8 × 11.5 0.20 71.5 － 19 UPJ2F010MPD 2.2 10 × 12.5 0.20 109.3 － 32 UPJ2F2R2MPD 3.3 10 × 16 0.20 141.58 － 52 UPJ2F3R3MPD 10 × 20 0.20 159.22 － 65 UPJ2F4R7MPD 10 4.7 12.5 × 20 0.20 226 － 98 UPJ2F100MHD 22 16 × 25 0.20 377.2 － 150 UPJ2F220MHD 33 16 × 31.5 0.20 515.8 － 185 UPJ2F330MHD 47 18 × 35.5 0.20 692.2 － 235 UPJ2F470MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UPJ Dimensions Rated Voltage （V） （code） 350 （2V） 400 （2G） Rated Capacitance （µF） Case Size φD×L（mm） tan δ 1 10 × 12.5 0.20 2.2 10 × 16 3.3 10 × 20 4.7 Rated Ripple （mArms） Part Number 105℃/ 10 to 200kHz 105℃/ 120Hz 75 － 21 UPJ2V010MPD 0.20 117 － 34 UPJ2V2R2MPD 0.20 146.2 － 54 UPJ2V3R3MPD 10 × 20 0.20 165.8 － 65 UPJ2V4R7MPD 10 12.5 × 25 0.20 240 － 100 UPJ2V100MHD 22 16 × 25 0.20 408 － 150 UPJ2V220MHD 33 16 × 35.5 0.20 562 － 190 UPJ2V330MHD 47 （ ） 18 × 40 0.20 758 － 240 UPJ2V470MHD 1 10 × 12.5 0.25 80 － 17 UPJ2G010MPD 2.2 10 × 16 0.25 128 － 28 UPJ2G2R2MPD 3.3 10 × 20 0.25 152.8 － 47 UPJ2G3R3MPD 4.7 12.5 × 20 0.25 175.2 － 55 UPJ2G4R7MHD 10 450 （2W） Leakage Current （µA） at 20℃ after 1 minute 0.25 260 － 85 UPJ2G100MHD 22 12.5 × 25 16 × 31.5 0.25 452 － 130 UPJ2G220MHD 33 18 × 35.5 0.25 628 － 170 UPJ2G330MHD 1 10 × 16 0.25 85 － 17 UPJ2W010MPD 2.2 10 × 20 0.25 139 － 28 UPJ2W2R2MPD 3.3 12.5 × 20 0.25 159.4 － 48 UPJ2W3R3MHD 4.7 12.5 × 25 0.25 184.6 － 55 UPJ2W4R7MHD 16 × 25 0.25 280 － 90 UPJ2W100MHD 10 22 16 × 35.5 0.25 496 － 135 UPJ2W220MHD 33 18 × 40 0.25 694 － 170 UPJ2W330MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100K