UPM2W010MPD1TD

ALUMINUM ELECTROLYTIC CAPACITORS UPM Low Impedance, High Reliability High reliability withstanding 5000 hour load life at +105°C (3000/2000 hours for smaller case sizes as specified below). Capacitance ranges available based on the numerical values in E12 series under JIS. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). AEC-Q200 compliant. Please contact us for details. (Through 100V only) UPM Smaller UPW Specifications Item Performance Characteristics Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance – 55 to +105°C (6.3 to 100V), –40 to +105°C (160 to 400V), –25 to +105°C (450V) 6.3 to 450V 1 to 15000µF ± 20% at 120Hz, 20°C Rated Voltage (V) 6.3 to 100 Leakage Current 160 to 450 After 1 minute's application of rated voltage at 20°C, < 1000 : I = 0.1CV+40 (µA) or less. CV = After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.03CV or 4 (µA), whichever is greater. Leakage current CV > 1000 : For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Tangent of loss angle (tan δ) Rated Voltage (V) tan δ (MAX.) Stability at Low Temperature Impedance ratio (MAX.) 10 0.19 6.3 0.22 16 0.16 6.3 · 10 — — 4 Rated voltage (V) Z– 25°C / Z+20°C Z– 40°C / Z+20°C Z– 55°C / Z+20°C 16 — — 3 The specifications listed below shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied at 105°C for the condition listed at right.The peak voltage shall not exceed the rated voltage. Endurance 25 0.14 35 0.12 50 0.10 63 to 100 160 to 350 400 · 450 0.08 0.20 0.25 25 · 35 50 to 100 160 · 200 — — — — — 4 — 3 2 Rated Voltage I = 0.04CV+100 (µA) or less. Measurement frequency : 120Hz at 20°C 315 · 350 — 8 — 250 — 6 — φD(mm) 6.3〜450V 400 — 10 — 450 15 — — φ 5, φ 6.3 φ8 > = φ10 2000hrs. 3000hrs. 5000hrs. 120Hz Capacitance change Within ±20% of the initial capacitance value 200% or less than the initial specified value tan δ Less than or equal to the initial specified value Leakage current Shelf Life After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the characteristic requirements listed at right. Marking Printed with white color letter on dark brown sleeve. Capacitance change Within ±20% of the initial capacitance value 150% or less than the initial specified value tan δ Less than or equal to the initial specified value Leakage current Frequency coefficient of rated ripple current Radial Lead Type φd Sleeve (P.E.T.) Rated voltage Frequency coefficient 10000 P±0.5 φD+0.5 MAX. 15000 6800 4700 3300 Pressure relief vent 15MIN L+ MAX. (φ6.3up) 2200 4MIN 1500 (mm) (φD < 10) 1.5 (φD > = 10) 2.0 φD 5 6.3 8 10 12.5 16 18 P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 φd 0.5 0.5 0.6 0.6 0.6 0.8 0.8 1000 680 470 330 6.3 to 100V In case L > 25 for the φ12.5 dia. unit, lead dia. φ d = 0.8mm. Type numbering system (Example : 25V 470µF) 2 3 4 5 6 7 8 9 10 150 Cap.(μF) Please refer to the Guidelines for Aluminum Electrolytic Capacitors for end seal configuration information. 1 220 (10kHz to 200kHz=1) 100 68 47 33 11 12 120Hz 22 U PM 1 E 4 7 1 M PD 300Hz 1kHz 15 Size code Configuration Capacitance tolerance ( ±20%) Rated capacitance (470µF) Rated voltage (25V) Type Code Small Dia Low Profile 6 10 2.2 160 to 450V 0 0.5 0.6 0.7 0.8 Frequency coefficient 0.9 1.0 50Hz 120Hz 300Hz 1kHz 10kHz or more 0.80 1.00 1.25 1.40 1.60 Series name Type Configuration φD Pb-free leadwire Pb-free PET sleeve 5 DD 6.3 8 · 10 12.5 to 18 ED PD HD Dimension table in next page. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UPM ■ Dimensions Rated Voltage （V） （code） 6.3 （0J） 10 （1A） Rated Capacitance （µF） Case Size φD×L（mm） tan δ Impedance（Ω） MAX. Rated Ripple （mArms） Leakage Current （µA） at 20℃ after 1 minute 20℃/ 100kHz －10℃/ 100kHz 105℃/ 10 to 200kHz （ ） 105℃/ 120Hz Part Number 100 5× 11 0.22 18.9 0.85 1.70 150 99 UPM0J101MDD 120 5× 11 0.22 22.68 0.65 1.30 175 115 UPM0J121MDD 150 6.3× 11 0.22 28.35 0.49 0.98 225 155 UPM0J151MED 180 6.3× 11 0.22 34.02 0.39 0.78 250 175 UPM0J181MED 220 6.3× 11 0.22 41.58 0.30 0.60 285 205 UPM0J221MED 270 6.3× 15 0.22 51.03 0.24 0.48 370 275 UPM0J271MED 330 6.3× 15 0.22 62.37 0.20 0.40 405 310 UPM0J331MED 390 8× 11.5 0.22 73.71 0.17 0.34 445 345 UPM0J391MPD 470 8× 15 0.22 88.83 0.14 0.28 550 440 UPM0J471MPD 470 10× 12.5 0.22 88.83 0.14 0.28 635 505 UPM0J471MPD6 560 8× 15 0.22 105.84 0.12 0.24 595 485 UPM0J561MPD 560 10× 12.5 0.22 105.84 0.13 0.26 670 545 UPM0J561MPD6 680 8× 20 0.22 128.52 0.10 0.20 730 605 UPM0J681MPD 680 10× 16 0.22 128.52 0.11 0.22 825 685 UPM0J681MPD6 820 8×20 0.22 154.98 0.085 0.17 795 675 UPM0J821MPD 820 10× 16 0.22 154.98 0.095 0.19 840 715 UPM0J821MPD6 1000 10× 20 0.22 189 0.075 0.15 950 820 UPM0J102MPD 1000 12.5×15 0.22 189 0.085 0.17 890 770 UPM0J102MHD6 1200 10× 20 0.22 226.8 0.065 0.13 1060 930 UPM0J122MPD 1200 12.5× 15 0.22 226.8 0.075 0.15 950 835 UPM0J122MHD6 1500 10× 25 0.22 283.5 0.055 0.11 1260 1130 UPM0J152MPD 1500 12.5× 15 0.22 283.5 0.065 0.13 1020 915 UPM0J152MHD6 1800 10× 31.5 0.22 340.2 0.050 0.10 1370 1230 UPM0J182MPD 1800 16× 15 0.22 340.2 0.055 0.11 1270 1140 UPM0J182MHD6 2200 10× 31.5 0.24 415.8 0.043 0.086 1470 1320 UPM0J222MPD 2200 16× 15 0.24 415.8 0.049 0.098 1340 1200 UPM0J222MHD6 2700 12.5× 25 0.24 510.3 0.038 0.076 1700 1530 UPM0J272MHD 2700 18× 15 0.24 510.3 0.044 0.088 1500 1350 UPM0J272MHD6 3300 12.5× 25 0.26 623.7 0.034 0.068 1710 1530 UPM0J332MHD 3300 18× 15 0.26 623.7 0.039 0.078 1600 1440 UPM0J332MHD6 3900 12.5× 31.5 0.26 737.1 0.031 0.062 1980 1780 UPM0J392MHD 3900 16× 20 0.26 737.1 0.036 0.072 1770 1590 UPM0J392MHD6 4700 12.5× 35.5 0.28 888.3 0.028 0.056 2230 2000 UPM0J472MHD 4700 18× 20 0.28 888.3 0.032 0.064 1920 1720 UPM0J472MHD6 5600 12.5×40 0.30 1058.4 0.026 0.052 2460 2210 UPM0J562MHD 5600 18× 20 0.30 1058.4 0.030 0.060 1980 1780 UPM0J562MHD6 6800 16× 31.5 0.32 1285.2 0.024 0.048 2510 2250 UPM0J682MHD 6800 18× 25 0.32 1285.2 0.027 0.054 2350 2110 UPM0J682MHD6 8200 16× 35.5 0.36 1549.8 0.022 0.044 2770 2490 UPM0J822MHD 8200 18× 31.5 0.36 1549.8 0.025 0.050 2600 2340 UPM0J822MHD6 10000 16×40 0.40 1890 0.020 0.040 3110 2790 UPM0J103MHD 10000 18×31.5 0.40 1890 0.023 0.046 2720 2440 UPM0J103MHD6 12000 18×35.5 0.44 2268 0.019 0.038 3050 2740 UPM0J123MHD 15000 18×40 0.50 2835 0.018 0.036 3300 2970 UPM0J153MHD 68 5×11 0.19 20.4 0.80 1.60 155 97 UPM1A680MDD 82 5 ×11 0.19 24.6 0.65 1.30 175 110 UPM1A820MDD 100 6.3× 11 0.19 30 0.55 1.10 210 135 UPM1A101MED 120 6.3 ×11 0.19 36 0.44 0.88 235 160 UPM1A121MED 150 6.3× 11 0.19 45 0.35 0.70 265 185 UPM1A151MED 180 6.3× 11 0.19 54 0.29 0.58 290 205 UPM1A181MED 220 6.3× 15 0.19 66 0.24 0.48 370 270 UPM1A221MED For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UPM ■ Dimensions Rated Voltage （V） （code） Rated Capacitance （µF） 270 16 （1C） 6.3× 15 tan δ Impedance（Ω） MAX. Leakage Current （µA） at 20℃ after 1 minute 20℃/ 100kHz －10℃/ 100kHz （ ） Rated Ripple （mArms） 105℃/ 10 to 200kHz 105℃/ 120Hz Part Number 0.19 81 0.20 0.40 405 300 UPM1A271MED 8× 11.5 0.19 99 0.16 0.32 460 350 UPM1A331MPD 390 8× 15 0.19 117 0.14 0.28 550 430 UPM1A391MPD 390 10×12.5 0.19 117 0.15 0.30 635 490 UPM1A391MPD6 470 8× 15 0.19 141 0.12 0.24 595 475 UPM1A471MPD 470 10× 12.5 0.19 141 0.13 0.26 670 535 UPM1A471MPD6 330 10 （1A） Case Size φD×L（mm） 560 8× 20 0.19 168 0.10 0.20 730 595 UPM1A561MPD 560 10× 16 0.19 168 0.11 0.22 700 570 UPM1A561MPD6 680 8× 20 0.19 204 0.085 0.17 795 660 UPM1A681MPD 680 10× 16 0.19 204 0.090 0.18 825 685 UPM1A681MPD6 820 10× 20 0.19 246 0.070 0.14 985 835 UPM1A821MPD 820 12.5× 15 0.19 246 0.080 0.16 920 780 UPM1A821MHD6 1000 10× 20 0.19 300 0.060 0.12 1060 915 UPM1A102MPD 1000 12.5× 15 0.19 300 0.065 0.13 1040 900 UPM1A102MHD6 1200 10× 25 0.19 360 0.050 0.10 1260 1120 UPM1A122MPD 1200 12.5× 15 0.19 360 0.060 0.12 1060 930 UPM1A122MHD6 1500 10× 31.5 0.19 450 0.045 0.09 1450 1300 UPM1A152MPD 1500 16× 15 0.19 450 0.050 0.10 1330 1190 UPM1A152MHD6 1800 12.5× 20 0.19 540 0.039 0.078 1470 1320 UPM1A182MHD 1800 16× 15 0.19 540 0.044 0.088 1420 1270 UPM1A182MHD6 2200 12.5× 25 0.21 660 0.034 0.068 1710 1530 UPM1A222MHD 2200 18× 15 0.21 660 0.039 0.078 1600 1440 UPM1A222MHD6 2700 12.5× 31.5 0.21 810 0.030 0.060 1980 1780 UPM1A272MHD 2700 16× 20 0.21 810 0.035 0.070 1740 1560 UPM1A272MHD6 3300 12.5× 35.5 0.23 990 0.026 0.052 2230 2000 UPM1A332MHD 3300 16× 20 0.23 990 0.031 0.062 1850 1660 UPM1A332MHD6 3900 12.5× 40 0.23 1170 0.024 0.048 2460 2210 UPM1A392MHD 3900 18× 20 0.23 1170 0.028 0.056 2050 1840 UPM1A392MHD6 4700 16× 31.5 0.25 1410 0.023 0.046 2420 2170 UPM1A472MHD 4700 18× 25 0.25 1410 0.026 0.052 2350 2110 UPM1A472MHD6 5600 16× 35.5 0.27 1680 0.021 0.042 2610 2340 UPM1A562MHD 5600 18× 25 0.27 1680 0.024 0.048 2440 2190 UPM1A562MHD6 6800 16× 35.5 0.29 2040 0.020 0.040 2770 2490 UPM1A682MHD 6800 18× 31.5 0.29 2040 0.022 0.044 2720 2440 UPM1A682MHD6 8200 16× 40 0.33 2460 0.019 0.038 3110 2790 UPM1A822MHD 8200 18× 35.5 0.33 2460 0.021 0.042 3050 2740 UPM1A822MHD6 10000 18×40 0.37 3000 0.017 0.034 3300 2970 UPM1A103MHD 47 5 × 11 0.16 22.56 0.80 1.60 155 92 UPM1C470MDD 56 5 × 11 0.16 26.88 0.65 1.30 175 105 UPM1C560MDD 68 6.3 ×11 0.16 32.64 0.50 1.00 220 135 UPM1C680MED 82 6.3 ×11 0.16 39.36 0.42 0.84 240 155 UPM1C820MED 100 6.3× 11 0.16 48 0.35 0.70 265 175 UPM1C101MED 120 6.3 ×11 0.16 57.6 0.29 0.58 290 195 UPM1C121MED 150 6.3× 15 0.16 72 0.23 0.46 375 260 UPM1C151MED 180 6.3× 15 220 8× 11.5 0.16 86.4 0.20 0.40 405 285 UPM1C181MED 0.16 105.6 0.16 0.32 460 335 UPM1C221MPD 270 8× 15 0.16 129.6 0.14 0.28 550 410 UPM1C271MPD 270 10× 12.5 0.16 129.6 0.14 0.28 635 470 UPM1C271MPD6 UPM1C331MPD 330 8 ×15 0.16 158.4 0.12 0.24 595 455 330 10×12.5 0.16 158.4 0.12 0.24 670 510 UPM1C331MPD6 390 8× 20 0.16 187.2 0.10 0.20 730 570 UPM1C391MPD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UPM ■ Dimensions Rated Voltage （V） （code） 16 （1C） Rated Capacitance （µF） tan δ Leakage Current （µA） at 20℃ after 1 minute （ ） Impedance（Ω） MAX. 20℃/ 100kHz －10℃/ 100kHz Rated Ripple （mArms） 105℃/ 10 to 200kHz 105℃/ 120Hz Part Number 390 10×16 0.16 187.2 0.10 0.20 730 570 UPM1C391MPD6 470 8× 20 0.16 225.6 0.090 0.18 770 615 UPM1C471MPD 470 10× 16 0.16 225.6 0.090 0.18 825 660 UPM1C471MPD6 560 10× 20 0.16 268.8 0.075 0.15 950 775 UPM1C561MPD 560 12.5× 15 0.16 268.8 0.080 0.16 920 750 UPM1C561MHD6 680 10× 20 0.16 326.4 0.065 0.13 1060 880 UPM1C681MPD 680 12.5× 15 0.16 326.4 0.070 0.14 985 820 UPM1C681MHD6 820 10× 25 0.16 393.6 0.055 0.11 1260 1070 UPM1C821MPD 820 12.5× 15 0.16 393.6 0.060 0.12 1060 900 UPM1C821MHD6 1000 10× 31.5 0.16 480 0.047 0.094 1410 1220 UPM1C102MPD 1000 16× 15 0.16 480 0.055 0.11 1270 1100 UPM1C102MHD6 1200 12.5× 20 0.16 576 0.041 0.082 1430 1250 UPM1C122MHD 1200 16× 15 0.16 576 0.046 0.092 1390 1220 UPM1C122MHD6 1500 12.5× 25 0.16 720 0.036 0.072 1700 1530 UPM1C152MHD 1500 18× 15 0.16 720 0.041 0.082 1560 1400 UPM1C152MHD6 1800 12.5× 31.5 0.16 864 0.032 0.064 1880 1690 UPM1C182MHD 1800 16× 20 0.16 864 0.037 0.074 1700 1530 UPM1C182MHD6 2200 12.5× 31.5 0.18 1056 0.028 0.056 2010 1800 UPM1C222MHD 2200 16× 20 0.18 1056 0.033 0.066 1800 1620 UPM1C222MHD6 2700 12.5× 35.5 0.18 1296 0.025 0.050 2230 2000 UPM1C272MHD 2700 16× 25 0.18 1296 0.030 0.060 2190 1970 UPM1C272MHD6 3300 12.5× 40 0.20 1584 0.023 0.046 2460 2210 UPM1C332MHD 3300 18× 20 0.20 1584 0.027 0.054 2090 1880 UPM1C332MHD6 3900 16× 31.5 0.20 1872 0.022 0.044 2510 2250 UPM1C392MHD 3900 18× 25 0.20 1872 0.025 0.050 2350 2110 UPM1C392MHD6 4700 16× 35.5 0.22 2256 0.020 0.040 2770 2490 UPM1C472MHD 4700 18× 31.5 0.22 2256 0.023 0.046 2720 2440 UPM1C472MHD6 5600 16× 40 0.24 2688 0.019 0.038 3110 2790 UPM1C562MHD 5600 18× 35.5 0.24 2688 0.022 0.044 2620 2350 UPM1C562MHD6 6800 18× 35.5 0.26 3264 0.018 0.036 3050 2740 UPM1C682MHD 8200 18× 40 0.30 3936 0.017 0.034 3300 2970 UPM1C822MHD 33 5× 11 0.14 0.80 1.60 155 88 UPM1E330MDD 24.75 39 5× 11 0.14 29.25 0.65 1.30 175 100 UPM1E390MDD 47 6.3× 11 0.14 35.25 0.55 1.10 210 125 UPM1E470MED 56 6.3× 11 0.14 42 0.44 0.88 235 140 UPM1E560MED 68 6.3× 11 0.14 51 0.36 0.72 260 160 UPM1E680MED 82 6.3× 11 0.14 61.5 0.30 0.60 285 180 UPM1E820MED 100 6.3 ×15 0.14 75 0.24 0.48 370 245 UPM1E101MED 120 6.3 ×15 0.14 90 0.20 0.40 405 275 UPM1E121MED 0.14 112.5 0.16 0.32 460 320 UPM1E151MPD 150 25 （1E） Case Size φD×L（mm） 8× 11.5 180 8× 15 0.14 135 0.14 0.28 550 390 UPM1E181MPD 180 10× 12.5 0.14 135 0.15 0.30 635 450 UPM1E181MPD6 220 8 ×15 0.14 165 0.11 0.22 625 455 UPM1E221MPD 220 10×12.5 0.14 165 0.13 0.26 670 485 UPM1E221MPD6 UPM1E271MPD 270 8× 20 0.14 202.5 0.095 0.19 750 560 270 10× 16 0.14 202.5 0.11 0.22 700 525 UPM1E271MPD6 330 8 ×20 0.14 247.5 0.085 0.17 795 610 UPM1E331MPD 330 10×16 0.14 247.5 0.095 0.19 825 630 UPM1E331MPD6 390 10×20 0.14 292.5 0.070 0.14 985 770 UPM1E391MPD 390 12.5×15 0.14 292.5 0.080 0.16 920 720 UPM1E391MHD6 470 10× 20 0.14 352.5 0.065 0.13 1060 845 UPM1E471MPD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UPM ■ Dimensions Rated Voltage （V） （code） 25 （1E） 35 （1V） Rated Capacitance （µF） Impedance（Ω） MAX. Rated Ripple （mArms） Leakage Current （µA） at 20℃ after 1 minute 20℃/ 100kHz －10℃/ 100kHz 0.14 352.5 0.070 0.14 985 785 UPM1E471MHD6 0.14 420 0.055 0.11 1260 1030 UPM1E561MPD UPM1E561MHD6 Case Size φD×L（mm） tan δ 470 12.5× 15 560 10× 25 560 12.5× 15 （ ） 105℃/ 10 to 200kHz 105℃/ 120Hz Part Number 0.14 420 0.060 0.12 1060 860 680 10×31.5 0.14 510 0.046 0.092 1420 1180 UPM1E681MPD 680 16× 15 0.14 510 0.055 0.11 1270 1050 UPM1E681MHD6 820 12.5× 20 0.14 615 0.041 0.082 1440 1220 UPM1E821MHD 820 16× 15 0.14 615 0.049 0.098 1340 1140 UPM1E821MHD6 1000 12.5× 25 0.14 750 0.036 0.072 1700 1470 UPM1E102MHD 1000 18× 15 0.14 750 0.043 0.086 1520 1310 UPM1E102MHD6 1200 12.5× 25 0.14 900 0.032 0.064 1760 1550 UPM1E122MHD 1200 18× 15 0.14 900 0.039 0.078 1600 1400 UPM1E122MHD6 1500 12.5× 31.5 0.14 1125 0.029 0.058 1980 1780 UPM1E152MHD 1500 16× 20 0.14 1125 0.034 0.068 1770 1590 UPM1E152MHD6 1800 12.5× 35.5 0.14 1350 0.026 0.052 2230 2000 UPM1E182MHD 1800 16× 25 0.14 1350 0.031 0.062 2190 1970 UPM1E182MHD6 2200 12.5× 40 0.16 1650 0.024 0.048 2460 2210 UPM1E222MHD 2200 18× 20 0.16 1650 0.028 0.056 2050 1840 UPM1E222MHD6 2700 16× 31.5 0.16 2025 0.022 0.044 2510 2250 UPM1E272MHD 2700 18× 25 0.16 2025 0.025 0.050 2350 2110 UPM1E272MHD6 3300 16× 35.5 0.18 2475 0.020 0.040 2770 2490 UPM1E332MHD 3300 18× 31.5 0.18 2475 0.023 0.046 2720 2440 UPM1E332MHD6 3900 16× 40 0.18 2925 0.019 0.038 3110 2790 UPM1E392MHD 3900 18× 35.5 0.18 2925 0.021 0.042 3050 2740 UPM1E392MHD6 4700 18× 40 0.20 3525 0.018 0.036 3300 2970 UPM1E472MHD 22 5× 11 0.12 23.1 0.75 1.50 160 85 UPM1V220MDD 27 5× 11 0.12 28.35 0.60 1.20 180 99 UPM1V270MDD 33 6.3× 11 0.12 34.65 0.49 0.98 225 125 UPM1V330MED 39 6.3× 11 0.12 40.95 0.41 0.82 245 140 UPM1V390MED 47 6.3× 11 0.12 49.35 0.34 0.68 270 160 UPM1V470MED 56 6.3× 11 0.12 58.8 0.28 0.56 295 180 UPM1V560MED 68 6.3× 15 0.12 71.4 0.24 0.48 370 230 UPM1V680MED 82 6.3× 15 0.12 86.1 0.19 0.38 415 265 UPM1V820MED 100 8× 11.5 0.12 105 0.16 0.32 460 305 UPM1V101MPD 120 8 × 15 0.12 126 0.14 0.28 550 370 UPM1V121MPD 120 10×12.5 0.12 126 0.15 0.30 635 425 UPM1V121MPD6 150 8× 15 0.12 157.5 0.12 0.24 595 415 UPM1V151MPD 150 10× 12.5 0.12 157.5 0.12 0.24 680 475 UPM1V151MPD6 180 8 ×20 0.12 189 0.10 0.20 730 520 UPM1V181MPD 180 10×16 0.12 189 0.11 0.22 700 500 UPM1V181MPD6 220 8× 20 0.12 231 0.085 0.17 795 580 UPM1V221MPD UPM1V221MPD6 220 10× 16 0.12 231 0.090 0.18 825 600 270 10× 20 0.12 283.5 0.070 0.14 985 735 UPM1V271MPD 270 12.5× 15 0.12 283.5 0.080 0.16 920 690 UPM1V271MHD6 330 10×20 0.12 346.5 0.060 0.12 1060 810 UPM1V331MPD 330 12.5×15 0.12 346.5 0.065 0.13 1020 780 UPM1V331MHD6 390 10× 25 0.12 409.5 0.055 0.11 1260 980 UPM1V391MPD 390 12.5× 15 0.12 409.5 0.060 0.12 1060 825 UPM1V391MHD6 470 10×31.5 0.12 493.5 0.046 0.092 1450 1160 UPM1V471MPD 470 16× 15 0.12 493.5 0.055 0.11 1270 1010 UPM1V471MHD6 560 12.5× 20 0.12 588 0.041 0.082 1430 1170 UPM1V561MHD 560 16× 15 0.12 588 0.048 0.096 1360 1110 UPM1V561MHD6 For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UPM ■ Dimensions Rated Voltage （V） （code） 35 （1V） 50 （1H） Rated Capacitance （µF） Case Size φD×L（mm） tan δ Leakage Current （µA） at 20℃ after 1 minute （ ） Impedance（Ω） MAX. 20℃/ 100kHz －10℃/ 100kHz Rated Ripple （mArms） 105℃/ 10 to 200kHz 105℃/ 120Hz Part Number 680 12.5× 25 0.12 714 0.036 0.072 1700 1410 UPM1V681MHD 680 18×15 0.12 714 0.042 0.084 1540 1280 UPM1V681MHD6 820 12.5× 25 0.12 861 0.032 0.064 1760 1490 UPM1V821MHD 820 18× 15 0.12 861 0.038 0.076 1620 1380 UPM1V821MHD6 1000 12.5× 31.5 0.12 1050 0.029 0.058 1980 1710 UPM1V102MHD 1000 16×20 0.12 1050 0.034 0.068 1770 1530 UPM1V102MHD6 1200 12.5× 35.5 0.12 1260 0.026 0.052 2230 1960 UPM1V122MHD 1200 16× 25 0.12 1260 0.031 0.062 2190 1920 UPM1V122MHD6 1500 12.5× 40 0.12 1575 0.024 0.048 2460 2210 UPM1V152MHD 1500 18× 20 0.12 1575 0.028 0.056 2050 1840 UPM1V152MHD6 1800 16× 31.5 0.12 1890 0.022 0.044 2510 2250 UPM1V182MHD 1800 18× 25 0.12 1890 0.025 0.050 2350 2110 UPM1V182MHD6 2200 16× 35.5 0.14 2310 0.020 0.040 2770 2490 UPM1V222MHD 2200 18× 31.5 0.14 2310 0.023 0.046 2720 2440 UPM1V222MHD6 2700 16× 40 0.14 2835 0.018 0.036 3110 2790 UPM1V272MHD 2700 18× 35.5 0.14 2835 0.021 0.042 3050 2740 UPM1V272MHD6 3300 18× 40 0.16 3465 0.017 0.034 3300 2970 UPM1V332MHD 2.2 5× 11 0.10 4 5.00 10.00 54 27 UPM1H2R2MDD 3.3 5× 11 0.10 4.95 3.30 6.60 66 33 UPM1H3R3MDD 4.7 5× 11 0.10 7.05 2.20 4.40 81 40 UPM1H4R7MDD 6.8 5× 11 0.10 10.2 1.80 3.60 91 45 UPM1H6R8MDD 10 5× 11 0.10 15 1.40 2.80 115 57 UPM1H100MDD 12 5× 11 0.10 18 1.20 2.40 125 62 UPM1H120MDD 15 5× 11 0.10 22.5 0.93 1.86 145 72 UPM1H150MDD 18 5× 11 0.10 27 0.80 1.60 165 79 UPM1H180MDD 22 6.3×11 0.10 33 0.65 1.30 195 100 UPM1H220MED 27 6.3×11 0.10 40.5 0.53 1.06 215 115 UPM1H270MED 33 6.3×11 0.10 49.5 0.43 0.86 240 135 UPM1H330MED 39 6.3×11 0.10 58.5 0.36 0.72 260 150 UPM1H390MED 47 6.3×15 0.10 70.5 0.30 0.60 330 195 UPM1H470MED 56 6.3×15 0.10 84 0.25 0.50 360 220 UPM1H560MED 68 8× 11.5 0.10 102 0.20 0.40 415 260 UPM1H680MPD 82 8× 15 0.10 123 0.17 0.34 505 320 UPM1H820MPD 82 10 × 12.5 0.10 123 0.18 0.36 530 340 UPM1H820MPD6 100 8 ×20 0.10 150 0.14 0.28 620 410 UPM1H101MPD 100 10× 16 0.10 150 0.16 0.32 580 385 UPM1H101MPD6 120 8 ×20 0.10 180 0.12 0.24 755 510 UPM1H121MPD 120 10× 16 0.10 180 0.13 0.26 755 510 UPM1H121MPD6 150 10× 20 0.10 225 0.10 0.20 820 570 UPM1H151MPD 150 12.5×15 0.10 225 0.11 0.22 785 545 UPM1H151MHD6 180 10× 20 0.10 270 0.085 0.17 945 670 UPM1H181MPD 180 12.5×15 0.10 270 0.095 0.19 845 605 UPM1H181MHD6 220 10× 25 0.10 330 0.075 0.15 1150 840 UPM1H221MPD 220 12.5×15 0.10 330 0.080 0.16 920 670 UPM1H221MHD6 270 10× 31.5 0.10 405 0.065 0.13 1200 900 UPM1H271MPD 270 16× 15 0.10 405 0.070 0.14 1120 840 UPM1H271MHD6 330 10× 31.5 0.10 495 0.055 0.11 1300 995 UPM1H331MPD 330 16× 15 0.10 495 0.060 0.12 1210 925 UPM1H331MHD6 390 12.5×25 0.10 585 0.048 0.096 1440 1120 UPM1H391MHD 390 16× 15 0.10 585 0.055 0.11 1270 990 UPM1H391MHD6 470 12.5×25 0.10 705 0.044 0.088 1500 1200 UPM1H471MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UPM ■ Dimensions Rated Voltage （V） （code） 50 （1H） 63 （1J） Rated Capacitance （µF） Case Size φD×L（mm） tan δ Leakage Current （µA） at 20℃ after 1 minute （ ） Impedance（Ω） MAX. 20℃/ 100kHz Rated Ripple （mArms） －10℃/ 100kHz 105℃/ 10 to 200kHz 105℃/ 120Hz Part Number 470 18× 15 0.10 705 0.046 0.092 1470 1170 UPM1H471MHD6 560 12.5× 31.5 0.10 840 0.040 0.080 1720 1410 UPM1H561MHD 560 16× 20 0.10 840 0.044 0.088 1550 1270 UPM1H561MHD6 680 12.5× 35.5 0.10 1020 0.036 0.072 1900 1580 UPM1H681MHD 680 16× 20 0.10 1020 0.040 0.080 1630 1350 UPM1H681MHD6 820 12.5× 40 0.10 1230 0.033 0.066 2120 1800 UPM1H821MHD 820 18× 20 0.10 1230 0.036 0.072 1810 1540 UPM1H821MHD6 1000 16× 31.5 0.10 1500 0.030 0.060 2150 1860 UPM1H102MHD 1000 18× 25 0.10 1500 0.033 0.066 2020 1750 UPM1H102MHD6 1200 16× 35.5 0.10 1800 0.028 0.056 2320 2040 UPM1H122MHD 1200 18× 31.5 0.10 1800 0.031 0.062 2140 1880 UPM1H122MHD6 1500 16× 40 0.10 2250 0.026 0.052 2650 2380 UPM1H152MHD 1500 18× 31.5 0.10 2250 0.029 0.058 2340 2100 UPM1H152MHD6 1800 18× 35.5 0.10 2700 0.025 0.050 2620 2350 UPM1H182MHD 2200 18× 40 0.12 3300 0.024 0.048 2790 2510 UPM1H222MHD 10 5× 11 0.08 18.9 1.06 2.12 135 67 UPM1J100MDD 12 5× 11 0.08 22.68 0.93 1.86 145 72 UPM1J120MDD 15 6.3× 11 0.08 28.35 0.73 1.46 185 92 UPM1J150MED 18 6.3× 11 0.08 34.02 0.63 1.26 195 100 UPM1J180MED 22 6.3× 11 0.08 41.58 0.52 1.04 215 110 UPM1J220MED 27 6.3× 11 0.08 51.03 0.43 0.86 240 130 UPM1J270MED 33 6.3× 15 0.08 62.37 0.35 0.70 305 170 UPM1J330MED 39 6.3× 15 0.08 73.71 0.30 0.60 330 190 UPM1J390MED 47 8× 11.5 0.08 88.83 0.25 0.50 365 215 UPM1J470MPD 56 8× 15 0.08 105.84 0.21 0.42 450 275 UPM1J560MPD 56 10× 12.5 0.08 105.84 0.23 0.46 450 275 UPM1J560MPD6 68 8× 15 0.08 128.52 0.17 0.34 500 315 UPM1J680MPD 68 10× 12.5 0.08 128.52 0.19 0.38 495 310 UPM1J680MPD6 82 8×20 0.08 154.98 0.15 0.30 600 385 UPM1J820MPD UPM1J820MPD6 82 10×16 0.08 154.98 0.16 0.32 580 375 100 10× 20 0.08 189 0.12 0.24 750 495 UPM1J101MPD 100 12.5× 15 0.08 189 0.14 0.28 695 460 UPM1J101MHD6 120 10× 20 0.08 226.8 0.10 0.20 820 555 UPM1J121MPD 120 12.5×15 0.08 226.8 0.12 0.24 750 510 UPM1J121MHD6 150 10×25 0.08 283.5 0.090 0.18 950 665 UPM1J151MPD 150 12.5× 15 0.08 283.5 0.095 0.19 845 590 UPM1J151MHD6 180 10× 31.5 0.08 340.2 0.075 0.15 1110 790 UPM1J181MPD 180 16×15 0.08 340.2 0.080 0.16 1050 750 UPM1J181MHD6 220 12.5×20 0.08 415.8 0.065 0.13 1140 835 UPM1J221MHD 220 16×15 0.08 415.8 0.070 0.14 1120 820 UPM1J221MHD6 270 12.5× 25 0.08 510.3 0.055 0.11 1340 1000 UPM1J271MHD 270 18× 15 0.08 510.3 0.060 0.12 1290 965 UPM1J271MHD6 330 12.5×25 0.08 623.7 0.049 0.098 1420 1090 UPM1J331MHD 330 18× 15 0.08 623.7 0.050 0.10 1410 1080 UPM1J331MHD6 390 12.5× 31.5 0.08 737.1 0.043 0.086 1620 1260 UPM1J391MHD 390 16× 20 0.08 737.1 0.047 0.094 1500 1170 UPM1J391MHD6 UPM1J471MHD 470 12.5×35.5 0.08 888.3 0.039 0.078 1780 1420 470 16×25 0.08 888.3 0.042 0.084 1700 1360 UPM1J471MHD6 560 12.5× 40 0.08 1058.4 0.035 0.070 1950 1590 UPM1J561MHD 560 18× 20 0.08 1058.4 0.039 0.078 1730 1410 UPM1J561MHD6 680 16× 31.5 0.08 1285.2 0.032 0.064 2050 1700 UPM1J681MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UPM ■ Dimensions Rated Voltage （V） （code） 63 （1J） 80 （1K） Rated Capacitance （µF） tan δ Leakage Current （µA） at 20℃ after 1 minute （ ） Impedance（Ω） MAX. 20℃/ 100kHz －10℃/ 100kHz Rated Ripple （mArms） 105℃/ 10 to 200kHz 105℃/ 120Hz Part Number 680 18× 25 0.08 1285.2 0.035 0.070 1940 1610 UPM1J681MHD6 820 16× 35.5 0.08 1549.8 0.029 0.058 2220 1890 UPM1J821MHD 820 18× 31.5 0.08 1549.8 0.032 0.064 2110 1790 UPM1J821MHD6 1000 16× 40 0.08 1890 0.027 0.054 2370 2050 UPM1J102MHD 1000 18× 35.5 0.08 1890 0.029 0.058 2280 1970 UPM1J102MHD6 1200 18× 40 0.08 2268 0.025 0.050 2510 2210 UPM1J122MHD 4.7 5× 11 0.08 11.28 4.20 11.00 53 26 UPM1K4R7MDD 6.8 5× 11 0.08 16.32 2.60 7.00 68 34 UPM1K6R8MDD 10 6.3× 11 0.08 24 1.70 4.60 87 43 UPM1K100MED 12 6.3× 11 0.08 28.8 1.40 3.80 96 48 UPM1K120MED 15 6.3× 11 0.08 36 1.20 3.20 104 52 UPM1K150MED 18 6.3× 11 0.08 43.2 1.00 2.70 150 78 UPM1K180MED 22 6.3× 15 0.08 52.8 0.77 2.10 180 95 UPM1K220MED 27 6.3× 15 0.08 64.8 0.63 1.70 220 115 UPM1K270MED 33 8× 11.5 0.08 79.2 0.53 1.40 275 150 UPM1K330MPD 39 8× 15 0.08 93.6 0.46 1.20 300 170 UPM1K390MPD 39 10× 12.5 0.08 93.6 0.49 1.30 380 215 UPM1K390MPD6 47 8× 15 0.08 112.8 0.39 1.10 360 215 UPM1K470MPD 47 10× 12.5 0.08 112.8 0.42 1.10 410 245 UPM1K470MPD6 56 8× 20 0.08 134.4 0.34 0.92 490 295 UPM1K560MPD 56 10× 16 0.08 134.4 0.36 0.97 500 305 UPM1K560MPD6 68 10× 20 0.08 163.2 0.28 0.76 570 355 UPM1K680MPD 68 12.5× 15 0.08 163.2 0.31 0.84 520 325 UPM1K680MHD6 82 10× 20 0.08 196.8 0.25 0.68 620 395 UPM1K820MPD 82 12.5× 15 0.08 196.8 0.27 0.73 560 355 UPM1K820MHD6 100 10×25 0.08 240 0.21 0.57 795 525 UPM1K101MPD 100 12.5× 15 0.08 240 0.23 0.62 605 400 UPM1K101MHD6 120 10× 31.5 0.08 288 0.18 0.49 870 585 UPM1K121MPD 120 16× 15 0.08 288 0.20 0.54 663 445 UPM1K121MHD6 150 10× 31.5 0.08 360 0.15 0.41 955 665 UPM1K151MPD 150 16× 15 0.08 360 0.18 0.47 699 470 UPM1K151MHD6 UPM1K181MHD 180 12.5× 25 0.08 432 0.13 0.35 1040 735 180 16× 15 0.08 432 0.15 0.41 766 545 UPM1K181MHD6 220 12.5× 31.5 0.08 528 0.12 0.32 1160 845 UPM1K221MHD 220 18× 15 0.08 528 0.13 0.35 881 645 UPM1K221MHD6 270 12.5× 31.5 0.08 648 0.10 0.27 1270 945 UPM1K271MHD 270 16×20 0.08 648 0.11 0.30 1240 920 UPM1K271MHD6 330 12.5×35.5 0.08 792 0.088 0.24 1450 1100 UPM1K331MHD 330 16×25 0.08 792 0.099 0.27 1440 1100 UPM1K331MHD6 390 12.5× 40 0.08 936 0.078 0.21 1610 1250 UPM1K391MHD 390 18× 20 0.08 936 0.089 0.24 1450 1120 UPM1K391MHD6 470 16× 31.5 0.08 1128 0.069 0.19 1790 1430 UPM1K471MHD UPM1K471MHD6 470 18×25 0.08 1128 0.080 0.22 1650 1320 560 16×35.5 0.08 1344 0.062 0.17 2000 1640 UPM1K561MHD 560 18× 31.5 0.08 1344 0.072 0.19 1750 1430 UPM1K561MHD6 680 16× 40 0.08 1632 0.055 0.15 2200 1830 UPM1K681MHD 680 18×31.5 0.08 1632 0.065 0.18 1850 1540 UPM1K681MHD6 UPM1K821MHD 820 18×35.5 0.08 1968 0.049 0.13 2250 1910 18× 40 0.08 2400 0.044 0.12 2370 2050 UPM1K102MHD 2.2 5 ×11 0.08 6.6 6.60 18.00 43 21 UPM2A2R2MDD 3.3 5× 11 0.08 9.9 4.10 11.00 54 27 UPM2A3R3MDD 1000 100 （2A） Case Size φD×L（mm） For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UPM ■ Dimensions Rated Voltage （V） （code） Rated Capacitance （µF） （ ） Impedance（Ω） MAX. 20℃/ 100kHz －10℃/ 100kHz Rated Ripple （mArms） 105℃/ 10 to 200kHz 105℃/ 120Hz Part Number 6.3× 11 0.08 14.1 2.80 7.60 68 34 UPM2A4R7MED 6.8 6.3×11 0.08 20.4 1.90 5.10 83 41 UPM2A6R8MED 10 6.3×11 0.08 30 1.20 3.20 104 52 UPM2A100MED 12 6.3×11 0.08 36 1.00 2.70 150 75 UPM2A120MED 15 6.3×15 0.08 45 0.81 2.20 180 90 UPM2A150MED 18 6.3×15 0.08 54 0.67 1.80 220 110 UPM2A180MED 8× 11.5 0.08 66 0.55 1.50 275 145 UPM2A220MPD 27 8× 15 0.08 81 0.47 1.30 300 160 UPM2A270MPD 27 10× 12.5 0.08 81 0.50 1.40 380 205 UPM2A270MPD6 33 8× 15 0.08 99 0.38 1.00 360 200 UPM2A330MPD 33 10× 12.5 0.08 99 0.42 1.10 410 230 UPM2A330MPD6 39 8× 20 0.08 117 0.33 0.89 490 280 UPM2A390MPD 39 10× 16 0.08 117 0.36 0.97 500 285 UPM2A390MPD6 47 10× 20 0.08 141 0.28 0.76 570 340 UPM2A470MPD 47 12.5× 15 0.08 141 0.31 0.84 520 310 UPM2A470MHD6 56 10× 20 0.08 168 0.24 0.65 620 375 UPM2A560MPD 56 12.5× 15 0.08 168 0.27 0.73 560 340 UPM2A560MHD6 68 10× 25 0.08 204 0.21 0.57 795 500 UPM2A680MPD 68 12.5× 15 0.08 204 0.23 0.62 605 380 UPM2A680MHD6 UPM2A820MPD 82 10× 31.5 0.08 246 0.18 0.49 870 555 82 16× 15 0.08 246 0.19 0.51 681 435 UPM2A820MHD6 10× 31.5 0.08 300 0.15 0.41 955 635 UPM2A101MPD 100 16× 15 0.08 300 0.17 0.46 719 475 UPM2A101MHD6 120 12.5×25 0.08 360 0.13 0.35 1040 700 UPM2A121MHD 100 120 16× 15 0.08 360 0.14 0.38 793 535 UPM2A121MHD6 150 12.5× 25 0.08 450 0.11 0.30 1120 780 UPM2A151MHD UPM2A151MHD6 150 18× 15 0.08 450 0.12 0.32 917 640 180 12.5× 31.5 0.08 540 0.098 0.26 1270 900 UPM2A181MHD 180 16× 20 0.08 540 0.11 0.30 1240 880 UPM2A181MHD6 220 12.5× 35.5 0.08 660 0.087 0.23 1450 1050 UPM2A221MHD 220 16× 25 0.08 660 0.093 0.25 1440 1050 UPM2A221MHD6 270 12.5×40 0.08 810 0.072 0.19 1610 1200 UPM2A271MHD 270 18× 20 0.08 810 0.080 0.22 1450 1080 UPM2A271MHD6 330 16× 31.5 0.08 990 0.062 0.17 1790 1370 UPM2A331MHD 330 18×25 0.08 990 0.070 0.19 1650 1260 UPM2A331MHD6 UPM2A391MHD 390 16× 35.5 0.08 1170 0.053 0.14 2000 1550 390 18× 31.5 0.08 1170 0.062 0.17 1850 1430 UPM2A391MHD6 470 16×40 0.08 1410 0.047 0.13 2200 1760 UPM2A471MHD 470 18× 35.5 0.08 1410 0.056 0.15 1970 1570 UPM2A471MHD6 560 18× 35.5 0.08 1680 0.041 0.11 2250 1840 UPM2A561MHD 680 18×40 0.08 2040 0.036 0.097 2300 1910 UPM2A681MHD 8× 11.5 0.20 56 － － － 19 UPM2C010MPD 2.2 8× 11.5 0.20 75.2 － － － 30 UPM2C2R2MPD 3.3 10×12.5 0.20 92.8 － － － 50 UPM2C3R3MPD 4.7 10×12.5 0.20 115.2 － － － 57 UPM2C4R7MPD 10 10×16 0.20 164 － － － 90 UPM2C100MPD 22 12.5×20 0.20 240.8 － － － 140 UPM2C220MHD 33 12.5×25 0.20 311.2 － － － 175 UPM2C330MHD 47 16×25 0.20 400.8 － － － 220 UPM2C470MHD 16×35.5 0.20 740 － － － 330 UPM2C101MHD 1 160 （2C） tan δ Leakage Current （µA） at 20℃ after 1 minute 4.7 22 100 （2A） Case Size φD×L（mm） 100 For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UPM ■ Dimensions Rated Voltage （V） （code） 200 （2D） Rated Capacitance （µF） 400 （2G） 450 （2W） ） 20℃/ 100kHz －10℃/ 100kHz Rated Ripple （mArms） 105℃/ 10 to 200kHz 105℃/ 120Hz Part Number 8× 11.5 0.20 60 － － － 19 UPM2D010MPD 8× 11.5 0.20 84 － － － 30 UPM2D2R2MPD 3.3 10× 12.5 0.20 106 － － － 50 UPM2D3R3MPD 4.7 10× 16 0.20 134 － － － 60 UPM2D4R7MPD 10 10× 20 0.20 180 － － － 95 UPM2D100MPD 22 12.5× 25 0.20 276 － － － 145 UPM2D220MHD 33 16×25 0.20 364 － － － 180 UPM2D330MHD 47 16× 25 0.20 476 － － － 220 UPM2D470MHD 100 18× 40 0.20 900 － － － 345 UPM2D101MHD 0.20 65 － － － 19 UPM2E010MPD 8× 11.5 2.2 10× 12.5 0.20 95 － － － 32 UPM2E2R2MPD 3.3 10× 16 0.20 122.5 － － － 52 UPM2E3R3MPD 10× 16 0.20 147 － － － 60 UPM2E4R7MPD 10 4.7 12.5× 20 0.20 200 － － － 98 UPM2E100MHD 22 16×25 0.20 320 － － － 150 UPM2E220MHD 33 16× 25 0.20 430 － － － 180 UPM2E330MHD 47 16× 31.5 0.20 570 － － － 225 UPM2E470MHD 18× 40 0.20 1100 － － － 345 UPM2E101MHD 71.5 － － － 19 UPM2F010MPD UPM2F2R2MPD 1 350 （2V） （ Impedance（Ω） MAX. 1 100 315 （2F） tan δ Leakage Current （µA） at 20℃ after 1 minute 2.2 1 250 （2E） Case Size φD×L（mm） 8× 11.5 0.20 2.2 10× 12.5 0.20 109.3 － － － 32 3.3 10× 16 0.20 141.58 － － － 52 UPM2F3R3MPD 4.7 10× 20 0.20 159.22 － － － 65 UPM2F4R7MPD 10 12.5× 20 0.20 226 － － － 98 UPM2F100MHD 22 16× 25 0.20 377.2 － － － 150 UPM2F220MHD 33 16× 31.5 0.20 515.8 － － － 185 UPM2F330MHD 47 18× 35.5 0.20 692.2 － － － 235 UPM2F470MHD 1 10× 12.5 0.20 75 － － － 21 UPM2V010MPD 2.2 10× 16 0.20 117 － － － 34 UPM2V2R2MPD 3.3 10× 20 0.20 146.2 － － － 54 UPM2V3R3MPD 10× 20 0.20 165.8 － － － 65 UPM2V4R7MPD 10 4.7 12.5× 25 0.20 240 － － － 100 UPM2V100MHD 22 16× 25 0.20 408 － － － 150 UPM2V220MHD 33 16×35.5 0.20 562 － － － 190 UPM2V330MHD 47 18 × 40 0.20 758 － － － 240 UPM2V470MHD 1 10× 12.5 0.25 80 － － － 17 UPM2G010MPD 2.2 10× 16 0.25 128 － － － 28 UPM2G2R2MPD 3.3 10× 20 0.25 152.8 － － － 47 UPM2G3R3MPD 4.7 12.5× 20 0.25 175.2 － － － 55 UPM2G4R7MHD 12.5× 25 10 0.25 260 － － － 85 UPM2G100MHD 22 16× 31.5 0.25 452 － － － 130 UPM2G220MHD 33 18 × 35.5 0.25 628 － － － 170 UPM2G330MHD 1 10× 16 0.25 85 － － － 17 UPM2W010MPD 2.2 10× 20 0.25 139 － － － 28 UPM2W2R2MPD 3.3 12.5× 20 0.25 159.4 － － － 48 UPM2W3R3MHD 4.7 12.5× 25 0.25 184.6 － － － 55 UPM2W4R7MHD 10 16 × 25 0.25 280 － － － 90 UPM2W100MHD 22 16× 35.5 0.25 496 － － － 135 UPM2W220MHD 33 18 × 40 0.25 694 － － － 170 UPM2W330MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100K