UPT2D221MHD6

ALUMINUM ELECTROLYTIC CAPACITORS UPT Miniature Sized, High Ripple Current, Long Life High ripple current. Suited for ballast application. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). Valued marked with an ※ in the dimension table are scheduled to be discontinued and are not recommended for new designs. Dimensions UCA UCS UCY Specifications Item V UPT Code Long Life Cap.(µF) 200 220 250 2D 2P 2E 15 150 18 180 22 220 1 27 270 12 33 330 12 39 390 47 470 56 560 Smaller UPZ Performance Characteristics Category Temperature Range –40 to +105°C Rated Voltage Range 200 to 450V 12 10 × 31.5 Rated Capacitance Range 15 to 820µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current ※ 68 current680 0.35 (µA) 12.5 × 25 × 31.5 10than After 2 minutes' application of rated voltage at 20°C, leakage is not more 0.06CV+10 10 × 31.5 0.27 12 0.29 12.5 × 25 0.31 12 0.34 12.5 × 31.5 0.36 1 0.39 12.5 × 31.5 0.40 1 0.43 12.5 × 35.5 0.46 Measurement frequency : 120Hz at 20°C Rated voltage (V) tan δ (max.) Tangent of loss angle (tan δ) 200 0.12 220 0.12 250 0.12 400 420 0.15 82 0.20 450 820 0.20 0.41 12.5 × 25 12.5 × 31.5 Measurement frequency : 120Hz Rated voltage (V) 100 Z(– 25°C) / Z(+20°C) Stability at Low Temperature Impedance ratio (max.) 200 3 250 400 420 450 3 3 8 8 8 12.5 × 31.5 0.48 12.5 × 31.5 151 12.5 × 35.5 12.5 × 40 0.62 0.58 40 16 × 31.5 After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 16 × 35.5 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. 16 × 31.5 0.67 180 0.70 181 12.5 × 40 18 × 31.5 Printed with white color letter on dark brown sleeve. Shelf Life Marking 220 16 × (V) 40 16 × 35.5 0.76 Capacitance 16 × 31.5 ※ I : Leakage Current (μA), C : Rated (μF), V 0.77 : Rated Voltage 221 18 × 31.5 Radial Lead Type φd 0.77 18 × 35.5 P±0.5 φD+ max. 15min. 0.72 0.72 1.05 4 5 6 7 8 9 10 11 390 391 18 × 40 1.13 470 471 22 × 40 1.20 1.01 22 × 40 22 × 40 1.15 Size code 22 × 50 Capacitance tolerance (±20%) 561 4min. 680 820 681 Configuration φD 821 10 12.5 to 18 20 to 25 22 × 50 1.50 25 × 40 1.50 25 × 50 25 × 40 1.45 1.55 25 × 40 25 × 50 1.60 1.60 Type Pb-free leadwire Pb-free PET sleeve PD 1.45 1.50 voltage (250V) Rated 25 × 50 1.50 Series name Rated capacitance (220µF) 22 × 50 HD RD Frequency coefficient of rated ripple current Frequency 50Hz 120Hz 300Hz 1kHz 10kHz or more Coefficient 0.80 1.00 1.25 1.40 1.60  lease refer to the Guidelines for Aluminum Electrolytic Capacitors P for end seal configuration information. Dimension table in next page. CAT.8100L 2 2 12 40 2 0.83 35.5 U P331T 2 E182× 2 1 M1.01 H D 18 T× 3 1 0.83 330 560 L± 0.62 0.95 2 1 1 270 Configuration Pressure relief vent 0.53 16 × 40 0.88 0.88 16 × 35.5 Type numbering system (Example : 250V 220µF) 18 × 40 271 18 × 35.5 0.88 0.87 18 × 31.5 1 Sleeve (PET) 18 × 31.5 0.81 1 1 12.5 × × 35.5 0.49 value 121 12.5 × 31.5 Within0.53 ± 20% of12.5 the initial capacitance Capacitance change 200% or less than the initial specified value tan δ Less than or equal to the initial specified value Leakage current The specifications listed at right shall be met when the 120 capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 5000 hours at 105°C, the peak voltage shall not exceed the rated voltage. 150 Endurance 220 101 2 ALUMINUM ELECTROLYTIC CAPACITORS UPT Dimensions Rated Voltage （V） （code） Rated Capacitance （µF） 68 Rated Ripple （mArms） （105℃/120Hz） Part Number 　UPT2D680MPD （ ） 0.12 826 350 994 410 　UPT2D820MHD 100 12.5× 30.5 0.12 1210 480 　UPT2D101MHD 120 12.5× 30.5 0.12 1450 530 　UPT2D121MHD 150 12.5× 35.5 0.12 1810 620 　UPT2D151MHD 180 12.5× 40 0.12 2170 700 　UPT2D181MHD 220 16× 30.5 0.12 2650 760 　UPT2D221MHD 220 18× 30.5 0.12 2650 810 　UPT2D221MHD6 270 16× 35.5 0.12 3250 880 　UPT2D271MHD 270 18× 30.5 0.12 3250 870 　UPT2D271MHD6 330 18× 35.5 0.12 3970 1010 　UPT2D331MHD 390 18× 40 0.12 4690 1130 　UPT2D391MHD 470 22× 40 0.12 5650 1200 ※UPT2D471MRD 680 22× 50 0.12 8170 1500 ※UPT2D681MRD 680 25× 40 0.12 8170 1500 ※UPT2D681MRD6 820 25× 50 0.12 9850 1600 ※UPT2D821MRD 10× 30.5 0.12 749.2 290 　UPT2P560MPD 68 12.5× 25 0.12 907.6 340 　UPT2P680MHD 82 12.5× 30.5 0.12 1092.4 390 　UPT2P820MHD 100 12.5× 30.5 0.12 1330 430 　UPT2P101MHD 120 12.5× 35.5 0.12 1594 490 　UPT2P121MHD 150 12.5× 40 0.12 1990 580 　UPT2P151MHD 180 16× 30.5 0.12 2386 670 　UPT2P181MHD 220 16× 35.5 0.12 2914 770 　UPT2P221MHD 220 18× 30.5 0.12 2914 770 　UPT2P221MHD6 270 16× 40 0.12 3574 880 　UPT2P271MHD 270 18× 35.5 0.12 3574 880 　UPT2P271MHD6 330 18× 40 0.12 4366 1010 　UPT2P331MHD 390 22× 40 0.12 5158 1150 ※UPT2P391MRD 560 22× 50 0.12 7402 1500 ※UPT2P561MRD 560 25× 40 0.12 7402 1500 ※UPT2P561MRD6 680 25× 50 0.12 8986 1600 ※UPT2P681MRD 10× 30.5 47 250 （2E） Leakage Current （µA） at 20℃ after 2 minutes 0.12 56 220 （2P） 10× 30.5 tan δ 12.5× 25 82 200 （2D） Case Size φD×L（mm） 0.12 715 270 　UPT2E470MPD 56 12.5× 25 0.12 850 310 　UPT2E560MHD 68 12.5× 30.5 0.12 1030 360 　UPT2E680MHD 82 12.5× 30.5 0.12 1240 400 　UPT2E820MHD 100 12.5× 35.5 0.12 1510 460 　UPT2E101MHD 120 12.5× 40 0.12 1810 530 　UPT2E121MHD 150 16× 30.5 0.12 2260 620 　UPT2E151MHD 180 16× 35.5 0.12 2710 720 　UPT2E181MHD 180 18× 30.5 0.12 2710 720 　UPT2E181MHD6 220 16× 40 0.12 3310 830 　UPT2E221MHD 220 18× 35.5 0.12 3310 830 　UPT2E221MHD6 270 18× 40 0.12 4060 950 　UPT2E271MHD 330 22× 40 0.12 4960 1050 ※UPT2E331MRD 470 22× 50 0.12 7060 1450 ※UPT2E471MRD 470 25×40 0.12 7060 1450 ※UPT2E471MRD6 560 25×50 0.12 8410 1550 ※UPT2E561MRD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100L ALUMINUM ELECTROLYTIC CAPACITORS UPT Dimensions Rated Voltage （V） （code） Rated Capacitance （µF） 22 400 （2G） Rated Ripple （mArms） （105℃/120Hz） Part Number 0.15 538 210 　UPT2G220MPD tan δ 10× 30.5 （ ） 27 12.5× 25 0.15 658 240 　UPT2G270MHD 33 12.5× 30.5 0.15 802 290 　UPT2G330MHD 39 12.5× 30.5 0.15 946 320 　UPT2G390MHD 47 12.5× 35.5 0.15 1138 370 　UPT2G470MHD 56 12.5× 40 0.15 1354 420 　UPT2G560MHD 68 16× 30.5 0.15 1642 460 　UPT2G680MHD 82 16× 30.5 0.15 1978 500 　UPT2G820MHD 100 16× 35.5 0.15 2410 580 　UPT2G101MHD 100 18× 30.5 0.15 2410 580 　UPT2G101MHD6 120 16× 40 0.15 2890 660 　UPT2G121MHD 120 18× 35.5 0.15 2890 670 　UPT2G121MHD6 150 18× 40 0.15 3610 770 　UPT2G151MHD 180 22× 40 0.15 4330 850 ※UPT2G181MRD 270 22× 50 0.15 6490 1300 ※UPT2G271MRD 270 25× 40 0.15 6490 1300 ※UPT2G271MRD6 330 25× 50 0.15 7930 1400 ※UPT2G331MRD 10× 30.5 18 420 （W6） Leakage Current （µA） at 20℃ after 2 minutes Case Size φD×L（mm） 0.20 463.6 170 　UPTW6180MPD 22 12.5× 25 0.20 564.4 200 　UPTW6220MHD 27 12.5× 30.5 0.20 690.4 240 　UPTW6270MHD 33 12.5× 30.5 0.20 841.6 270 　UPTW6330MHD 39 12.5× 35.5 0.20 992.8 310 　UPTW6390MHD 47 12.5× 40 0.20 1194.4 360 　UPTW6470MHD 56 16× 30.5 0.20 1421.2 430 　UPTW6560MHD 68 16× 35.5 0.20 1723.6 510 　UPTW6680MHD 68 18× 30.5 0.20 1723.6 510 　UPTW6680MHD6 82 16× 40 0.20 2076.4 570 　UPTW6820MHD 82 18× 30.5 0.20 2076.4 570 　UPTW6820MHD6 100 18× 35.5 0.20 2530 610 　UPTW6101MHD 120 18× 40 0.20 3034 660 　UPTW6121MHD 150 22× 40 0.20 3790 800 ※UPTW6151MRD 180 22× 50 0.20 4546 950 ※UPTW6181MRD 180 25× 40 0.20 4546 950 ※UPTW6181MRD6 270 25× 50 0.20 6814 1200 ※UPTW6271MRD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100L ALUMINUM ELECTROLYTIC CAPACITORS UPT Dimensions Rated Voltage （V） （code） Rated Capacitance （µF） 15 450 （2W） Leakage Current （µA） at 20℃ after 2 minutes Rated Ripple （mArms） （105℃/120Hz） Part Number 0.20 415 150 　UPT2W150MPD Case Size φD×L（mm） tan δ 10× 30.5 （ ） 18 12.5×25 0.20 496 180 　UPT2W180MHD 22 12.5× 30.5 0.20 604 220 　UPT2W220MHD 27 12.5× 30.5 0.20 739 250 　UPT2W270MHD 33 12.5× 35.5 0.20 901 280 　UPT2W330MHD 39 12.5× 40 0.20 1063 320 　UPT2W390MHD 47 16× 30.5 0.20 1279 380 　UPT2W470MHD 56 16× 35.5 0.20 1522 440 　UPT2W560MHD 68 16× 40 0.20 1846 490 　UPT2W680MHD 68 18× 30.5 0.20 1846 480 　UPT2W680MHD6 82 18× 35.5 0.20 2224 550 　UPT2W820MHD 100 18× 40 0.20 2710 650 　UPT2W101MHD 120 22× 40 0.20 3250 770 ※UPT2W121MRD 150 22× 50 0.20 4060 920 ※UPT2W151MRD 150 25× 40 0.20 4060 920 ※UPT2W151MRD6 180 25× 50 0.20 4870 1100 ※UPT2W181MRD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100L