UPT2P181MPD

ALUMINUM ELECTROLYTIC CAPACITORS PT Miniature Sized, High Ripple Current, Long Life series High ripple current. Suited for ballast application. Adapted to the RoHS directive (2002/95/EC). PB Smaller PT Smaller Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current tan δ PZ Performance Characteristics – 25 ~ +105°C 200 ~ 450V 15 ~ 820µF ± 20% at 120Hz, 20°C After 2 minutes' application of rated voltage, leakage current is not more than 0.06CV+10 (µA) Measurement frequency : 120Hz, Temperature : 20°C Rated voltage (V) tan δ ( MAX.) 200 0.12 220 0.12 250 0.12 400 0.15 420 0.20 450 0.20 Measurement frequency : 120Hz Stability at Low Temperature Rated voltage (V) Impedance ratio ZT / Z20 (MAX.) Z– 25°C / Z+20°C 200 3 220 3 250 3 400 8 420 8 450 8 Endurance After an application of D.C. bias voltage plus the rated ripple current for 5000 hours at 105°C the peak voltage shall not exceed the rated D.C. voltage, capacitors meet the characteristic requirements listed at right. Capacitance change tan δ Leakage current Within ± 20% of initial value 200% or less of initial specified value Initial specified value or less Shelf Life Marking After storing the capacitors under no load at 105˚C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. Printed with white color letter on dark brown sleeve. Radial Lead Type Sleeve (P.E.T.) MAX. B Type numbering system (Example : 250V 220µF) d U PT 2 E 2 2 1 M HD T P ± 0.5 1 2 3 4 5 6 7 8 9 10 11 12 Size code Configuration Capacitance tolerance (±20%) Rated Capacitance (220µF) Rated voltage (250V) Series name Type B D+ Pressure relief vent L + MAX. 15 MIN 4 MIN B D 10 12.5 16 18 20 22 P 5.0 5.0 7.5 7.5 10.0 10.0 d 0.6 0.6 0.8 0.8 1.0 1.0 0.5 0.5 0.5 0.5 0.5 1.0 In case L > 25 for the 12.5 dia. unit, lead dia. B B B B B 25 12.5 1.0 1.0 d = 0.8mm. (mm) Configuration Pb-free leadwire D Pb-free PET sleeve 10 PD 12.5 ~ 18 HD 20 ~ 25 RD B D < 20): 1.5 D 20): 2.0 • Please refer to page 21 about the end seal configulation. Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. Dimension table in next page. CAT.8100V ALUMINUM ELECTROLYTIC CAPACITORS PT Cap series Dimensions V Code 150 180 220 270 330 390 470 560 10 10 10 12.5 12.5 12.5 10 200 2D 220 2P 250 2E 400 2G 420 W6 10 450 2W 15 18 22 27 33 39 47 56 68 ´ ´ ´ ´ ´ ´ ´ ´ ´ ´ ´ ´ ´ ´ ´ ´ 31.5 25 31.5 31.5 35.5 40 31.5 35.5 40 31.5 0.15 0.18 0.22 0.25 0.28 0.32 0.38 0.44 0.49 0.48 ´ ´ ´ ´ ´ ´ ´ ´ ´ ´ ´ ´ ´ ´ ´ ´ 31.5 25 31.5 31.5 35.5 40 31.5 35.5 31.5 40 31.5 0.17 0.20 0.24 0.27 0.31 0.36 0.43 0.51 0.51 0.57 0.57 12.5 12.5 12.5 12.5 12.5 16 16 16 18 ´ ´ ´ ´ ´ ´ ´ ´ ´ ´ ´ ´ ´ ´ 31.5 25 31.5 31.5 35.5 40 0.21 0.24 0.29 0.32 0.37 0.42 12.5 12.5 12.5 12.5 12.5 16 16 18 ´ ´ ´ ´ ´ ´ ´ ´ ´ ´ ´ ´ ´ ´ ´ ´ 31.5 25 0.27 0.31 12.5 12.5 ´ ´ ´ ´ ´ ´ ´ ´ ´ ´ ´ ´ ´ 31.5 0.29 12.5 680 10 ´ ´ ´ ´ ´ ´ ´ ´ ´ ´ ´ ´ ´ 31.5 0.35 12.5 25 0.34 12.5 31.5 0.36 16 31.5 0.46 82 820 12.5 25 0.41 12.5 31.5 0.39 12.5 31.5 0.40 16 31.5 0.50 16 18 18 35.5 0.55 100 101 12.5 31.5 0.48 12.5 31.5 0.43 12.5 35.5 0.46 16 18 16 18 35.5 31.5 40 35.5 0.58 0.58 0.66 0.67 18 35.5 0.61 18 40 0.65 120 121 12.5 31.5 0.53 12.5 35.5 0.49 12.5 40 0.53 18 40 0.66 22 40 0.77 150 151 12.5 35.5 0.62 12.5 40 0.58 16 31.5 0.62 18 40 0.77 22 40 0.80 22 25 50 40 0.92 0.92 180 181 12.5 40 0.70 16 31.5 0.67 16 18 35.5 31.5 40 35.5 0.72 0.72 0.83 0.83 22 40 0.85 22 25 50 40 0.95 0.95 25 50 1.10 220 221 16 18 16 18 31.5 31.5 35.5 31.5 35.5 40 0.76 0.81 0.88 0.87 1.01 1.13 16 18 16 18 18 22 35.5 31.5 40 35.5 40 40 0.77 0.77 0.88 0.88 1.01 1.15 16 18 270 330 390 470 271 18 40 0.95 22 25 ´ ´ ´ 50 40 50 1.30 1.30 1.40 25 ´ 50 1.20 331 391 18 18 22 40 1.05 25 471 22 40 1.20 22 25 22 25 50 40 1.45 1.45 560 561 ´ ´ ´ 50 40 1.50 1.50 25 50 1.55 680 820 681 22 25 ´ ´ ´ 50 40 50 1.50 1.50 1.60 25 50 1.60 822 25 fD´ Case size L (mm) : Rated Ripple (Arms) at 105¡C 120Hz : In this case, 6 will be put at 12th digit of type numbering system. Frequency coefficient of rated ripple current Frequency Coefficient 50Hz 0.80 120Hz 1.00 300Hz 1.25 1kHz 1.40 10kHz~ 1.60 CAT.8100V