UPT2W220MHD

ALUMINUM ELECTROLYTIC CAPACITORS UPT Miniature Sized, High Ripple Current, Long Life High ripple current. Suited for ballast application. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). Dimensions UCA UCS UCY V Cap.(µF) Specifications Item UPT Code Long Life 200 220 250 2D 2P 2E 15 150 18 180 22 220 27 270 1 33 330 1 39 390 47 470 56 560 Smaller UPZ Performance Characteristics Category Temperature Range –40 to +105°C Rated Voltage Range 200 to 450V 1 10 × 31.5 Rated Capacitance Range 15 to 820µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current 68 current680 0.35 (µA) 12.5 × 25 × 31.5 10than After 2 minutes' application of rated voltage at 20°C, leakage is not more 0.06CV+10 10 × 31.5 0.27 1 1 0.29 12.5 × 25 0.31 0.34 12.5 × 31.5 0.36 0.39 12.5 × 31.5 0.40 0.43 12.5 × 35.5 0.46 Measurement frequency : 120Hz at 20°C Tangent of loss angle (tan δ) Rated voltage (V) tan δ (MAX.) 200 0.12 220 0.12 250 0.12 400 420 0.15 82 0.20 450 820 0.20 0.41 12.5 × 25 12.5 × 31.5 Measurement frequency : 120Hz Rated voltage (V) Stability at Low Temperature Impedance ratio (MAX.) 100 Z– 25°C / Z+20°C 200 3 250 400 420 450 3 3 8 8 8 12.5 × 31.5 0.48 12.5 × 31.5 12.5 × × 35.5 0.49 value 121 12.5 × 31.5 Within0.53 ± 20% of12.5 the initial capacitance Capacitance change 200% or less than the initial specified value tan δ Less than or equal to the initial specified value Leakage current The specifications listed at right shall be met when the 120 capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 5000 hours at 105°C, the peak voltage shall not exceed the rated voltage. 150 Endurance 220 101 151 12.5 × 35.5 12.5 × 40 0.62 0.58 40 16 × 31.5 After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 16 × 35.5 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. 16 × 31.5 0.67 180 0.70 181 12.5 × 40 18 × 31.5 Printed with white color letter on dark brown sleeve. Shelf Life Marking 220 Radial Lead Type 270 221 330 φd P±0.5 MAX. φD+ MAX. 15 MIN 0.72 0.76 16 × 35.5 0.77 16 × 40 0.83 18 × 31.5 0.81 18 × 31.5 0.77 18 × 35.5 0.83 0.95 35.5 U P331T 2 E182× 2 1 M1.01 H D 18 T× 1.05 2 3 4 5 6 7 8 9 10 11 390 391 18 × 40 1.13 470 471 22 × 40 1.20 12 40 1.01 22 × 40 22 × 40 1.15 Size code 22 × 50 Capacitance tolerance (±20%) 25 × 40 1.45 1.55 25 × 40 4 MIN 680 25 × 50 1.60 820 22 × 50 561 681 Configuration φD 821 10 12.5 to 18 20 to 25 22 × 50 1.50 25 × 40 1.50 25 × 50 1.60 Type Pb-free leadwire Pb-free PET sleeve PD 1.45 1.50 voltage (250V) Rated 25 × 50 1.50 Series name Rated capacitance (220µF) 560 L+ 0.72 16 × 31.5 Configuration Pressure relief vent 0.62 16 × 40 0.88 0.88 16 × 35.5 Type numbering system (Example : 250V 220µF) 18 × 40 271 18 × 35.5 0.88 0.87 18 × 31.5 1 Sleeve (P.E.T.) 0.53 HD RD Frequency coefficient of rated ripple current Frequency 50Hz 120Hz 300Hz 1kHz 10kHz or more Coefficient 0.80 1.00 1.25 1.40 1.60 Please refer to the Guidelines for Aluminum Electrolytic Capacitors for end seal configuration information. Dimension table in next page. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UPT Dimensions 400 Rated Voltage （V） （code） 420 2G W6 12.5 × 25 0.21 0.24 12.5 × 31.5 0.29 12.5 × 31.5 0.32 16 × 35.5 0.58 18 × 31.5 0.58 16 × 40 0.66 18 × 35.5 0.67 18 × 40 0.77 UPT2D680MPD 410 UPT2D820MHD 0.17100 12.5 × 25 12.5× 31.5 0.18 0.12 1210 480 UPT2D101MHD 0.20120 12.5 × 31.5 12.5× 31.5 0.22 0.12 1450 530 UPT2D121MHD 12.5× 35.5 0.25 12.5× 40 0.28 16× 31.5 0.32 18× 31.5 0.38 16× 35.5 0.44 18× 31.5 0.49 18× 35.5 0.12 1810 620 UPT2D151MHD 0.12 2170 700 UPT2D181MHD 0.12 2650 760 UPT2D221MHD 0.12 2650 810 UPT2D221MHD6 0.12 3250 880 UPT2D271MHD 0.12 3250 870 UPT2D271MHD6 16 × 35.5 150 0.24 12.5 × 180 0.27 12.5 × 220 0.31 12.5 × 220 0.36 16 × 270 0.43 16 × 270 0.51330 16 × 0.12 3970 1010 UPT2D331MHD 18 × 31.5 0.51390 18 × 31.5 0.48 18× 40 0.12 4690 1130 UPT2D391MHD 16 × 40 0.57470 5650 1200 UPT2D471MRD 18 × 31.5 18 × 35.5 0.12 0.57680 22× 40 0.55 22× 50 0.12 8170 1500 UPT2D681MRD 8170 1500 UPT2D681MRD6 18 × 40 25× 40 0.65 25× 50 0.12 18 × 35.5 680 0.61 820 0.12 9850 12.5 × 31.5 12.5 × 31.5 16 × 31.5 0.85 18 × 40 0.66 68 82 22 × 40 0.80100 1.30 25 × 40 1.30 25 × 50 1.40 35.5 40 31.5 35.5 40 UPT2D821MRD 749.2 290 22 × 40 UPT2P560MPD 0.77 12.5× 25 0.12 907.6 340 UPT2P680MHD 12.5× 31.5 0.92 12.5×31.5 0.92 12.5×35.5 0.12 1092.4 390 22 × 50 UPT2P820MHD 0.12 1330 430 25 × 40 UPT2P101MHD 0.12 1594 490 UPT2P121MHD 0.12 1990 580 UPT2P151MHD 0.95180 0.12 2386 670 UPT2P181MHD 220 16× 35.5 0.12 2914 770 UPT2P221MHD 220 18× 31.5 0.12 2914 770 UPT2P221MHD6 270 1.20 270 16× 40 0.12 3574 880 UPT2P271MHD 18× 35.5 0.12 3574 880 UPT2P271MHD6 330 18× 40 0.12 4366 1010 UPT2P331MHD 390 22× 40 0.12 5158 1150 UPT2P391MRD 560 22× 50 0.12 7402 1500 UPT2P561MRD 560 25× 40 0.12 7402 1500 UPT2P561MRD6 680 25× 50 0.12 8986 1600 UPT2P681MRD 0.95150 25 × 40 25 × 50 1600 0.12 10× 31.5 12.5×40 1.10 16× 31.5 22 × 50 220 （2P） 22 × 50 31.5 56 120 22 × 40 ） 350 0.42 0.50 Part Number （ 826 12.5 × 25 10× 31.5 Rated Ripple （mArms） （105℃/120Hz） 994 12.5 × 40 16 × 31.5 2W 10 × 31.5 Leakage Current （µA） at 20℃ after 2 minutes 0.12 12.5 × 35.5 0.46 68 82 tan δ 0.12 12.5 × 35.5 200 12.5 × 40 0.37 （2D） 16 × 31.5 450 Case Size φD×L（mm） 0.15 12.5× 25 10 × 31.5 10 × 31.5 Rated Capacitance （µF） 25 × 50 0.12 715 270 UPT2E470MPD 56 47 12.5× 25 10× 31.5 0.12 850 310 UPT2E560MHD 68 12.5× 31.5 0.12 1030 360 UPT2E680MHD 82 12.5× 31.5 0.12 1240 400 UPT2E820MHD 12.5× 35.5 0.12 1510 460 UPT2E101MHD 120 12.5× 40 : Rated ripple current (Arms) at 105°C 120Hz 150 16× 31.5 : In this case, 6 will be put at 12th digit of 180 16× 35.5 250 type numbering system. （2E） 180 18× 31.5 0.12 1810 530 UPT2E121MHD 0.12 2260 620 UPT2E151MHD 0.12 2710 720 UPT2E181MHD 0.12 2710 720 UPT2E181MHD6 100 Case size φD × L(mm) 220 16× 40 0.12 3310 830 UPT2E221MHD 220 18× 35.5 0.12 3310 830 UPT2E221MHD6 270 18× 40 0.12 4060 950 UPT2E271MHD 330 22× 40 0.12 4960 1050 UPT2E331MRD 470 22× 50 0.12 7060 1450 UPT2E471MRD 470 25×40 0.12 7060 1450 UPT2E471MRD6 560 25×50 0.12 8410 1550 UPT2E561MRD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UPT Dimensions Rated Voltage （V） （code） Rated Capacitance （µF） 22 400 （2G） Rated Ripple （mArms） （105℃/120Hz） Part Number 0.15 538 210 UPT2G220MPD tan δ 10× 31.5 （ ） 27 12.5× 25 0.15 658 240 UPT2G270MHD 33 12.5× 31.5 0.15 802 290 UPT2G330MHD 39 12.5× 31.5 0.15 946 320 UPT2G390MHD 47 12.5× 35.5 0.15 1138 370 UPT2G470MHD 56 12.5×40 0.15 1354 420 UPT2G560MHD 68 16× 31.5 0.15 1642 460 UPT2G680MHD 82 16× 31.5 0.15 1978 500 UPT2G820MHD 100 16× 35.5 0.15 2410 580 UPT2G101MHD 100 18× 31.5 0.15 2410 580 UPT2G101MHD6 120 16× 40 0.15 2890 660 UPT2G121MHD 120 18× 35.5 0.15 2890 670 UPT2G121MHD6 150 18× 40 0.15 3610 770 UPT2G151MHD 180 22× 40 0.15 4330 850 UPT2G181MRD 270 22× 50 0.15 6490 1300 UPT2G271MRD 270 25× 40 0.15 6490 1300 UPT2G271MRD6 330 25× 50 0.15 7930 1400 UPT2G331MRD 10× 31.5 18 420 （W6） Leakage Current （µA） at 20℃ after 2 minutes Case Size φD×L（mm） 0.20 463.6 170 UPTW6180MPD 22 12.5× 25 0.20 564.4 200 UPTW6220MHD 27 12.5× 31.5 0.20 690.4 240 UPTW6270MHD 33 12.5× 31.5 0.20 841.6 270 UPTW6330MHD 39 12.5× 35.5 0.20 992.8 310 UPTW6390MHD 47 12.5× 40 0.20 1194.4 360 UPTW6470MHD 56 16× 31.5 0.20 1421.2 430 UPTW6560MHD 68 16× 35.5 0.20 1723.6 510 UPTW6680MHD 68 18× 31.5 0.20 1723.6 510 UPTW6680MHD6 82 16× 40 0.20 2076.4 570 UPTW6820MHD 82 18× 31.5 0.20 2076.4 570 UPTW6820MHD6 100 18× 35.5 0.20 2530 610 UPTW6101MHD 120 18× 40 0.20 3034 660 UPTW6121MHD 150 22× 40 0.20 3790 800 UPTW6151MRD 180 22× 50 0.20 4546 950 UPTW6181MRD 180 25× 40 0.20 4546 950 UPTW6181MRD6 270 25× 50 0.20 6814 1200 UPTW6271MRD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UPT Dimensions Rated Voltage （V） （code） Rated Capacitance （µF） 15 Rated Ripple （mArms） （105℃/120Hz） Part Number 0.20 415 150 UPT2W150MPD tan δ 10× 31.5 （ ） 18 12.5× 25 0.20 496 180 UPT2W180MHD 22 12.5× 31.5 0.20 604 220 UPT2W220MHD 27 12.5× 31.5 0.20 739 250 UPT2W270MHD 33 12.5× 35.5 0.20 901 280 UPT2W330MHD 39 12.5× 40 0.20 1063 320 UPT2W390MHD 16× 31.5 0.20 1279 380 UPT2W470MHD 56 16× 35.5 0.20 1522 440 UPT2W560MHD 68 16× 40 0.20 1846 490 UPT2W680MHD 68 18×31.5 0.20 1846 480 UPT2W680MHD6 82 18× 35.5 0.20 2224 550 UPT2W820MHD 100 18× 40 0.20 2710 650 UPT2W101MHD 120 22× 40 0.20 3250 770 UPT2W121MRD 150 22× 50 0.20 4060 920 UPT2W151MRD 150 25× 40 0.20 4060 920 UPT2W151MRD6 180 25× 50 0.20 4870 1100 UPT2W181MRD 47 450 （2W） Leakage Current （µA） at 20℃ after 2 minutes Case Size φD×L（mm） For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100K