UPTW6121MHDCDT

ALUMINUM ELECTROLYTIC CAPACITORS UPT Miniature Sized, High Ripple Current, Long Life High ripple current. Suited for ballast application. Compliant to the RoHS directive (2011/65/EU). UCA 250 UPT Long Life Smaller UPZ 244 Specifications Item Performance Characteristics Category Temperature Range –25 to +105°C Rated Voltage Range 200 to 450V Rated Capacitance Range 15 to 820µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.06CV+10 (µA) Measurement frequency : 120Hz at 20°C Tangent of loss angle (tan δ) Rated voltage (V) tan δ (MAX.) 200 0.12 220 0.12 250 0.12 400 0.15 420 0.20 450 0.20 Measurement frequency : 120Hz Stability at Low Temperature Rated voltage (V) Impedance ratio ZT / Z20 (MAX.) Z– 25°C / Z+20°C 200 220 250 400 420 450 3 3 3 8 8 8 Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 5000 hours at 105°C, the peak voltage shall not exceed the rated voltage. Shelf Life After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on dark brown sleeve. Within ± 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current Type numbering system (Example : 250V 220µF) Radial Lead Type 1 Sleeve (P.E.T.) 2 3 4 5 6 7 8 9 10 11 12 U P T 2 E 2 2 1 M HD T φd Size code Capacitance tolerance (±20%) φD+ P±0.5 MAX. Configuration Rated capacitance (220µF) Rated voltage (250V) Series name Pressure relief vent L+ MAX. 15 MIN Type 4 MIN Configuration φD Pb-free leadwire Pb-free PET sleeve 10 PD 12.5 to 18 20 to 25 HD RD • Please refer to page 20 about the end seal configuration. Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. 242 CAT.8100H ALUMINUM ELECTROLYTIC CAPACITORS UPT Dimensions V Cap Code 200 220 250 400 420 450 2D 2P 2E 2G W6 2W 15 150 18 180 22 220 0.21 27 270 12.5 × 25 0.24 33 330 12.5 × 31.5 39 390 12.5 × 31.5 47 470 56 560 68 680 82 100 120 150 180 220 270 820 101 121 151 181 221 271 10 × 31.5 10 × 31.5 0.22 12.5 × 31.5 0.25 0.29 12.5 × 31.5 0.27 12.5 × 35.5 0.28 0.32 12.5 × 35.5 0.31 12.5 × 40 0.32 12.5 × 40 0.37 12.5 × 40 0.42 10 × 31.5 12.5 × 25 0.35 0.41 12.5 × 31.5 0.48 12.5 × 31.5 0.53 12.5 × 35.5 0.62 12.5 × 40 12.5 × 25 0.34 12.5 × 31.5 0.36 12.5 × 31.5 12.5 × 31.5 12.5 × 35.5 12.5 × 40 0.43 0.49 0.58 16 × 31.5 0.70 0.39 0.67 12.5 × 31.5 12.5 × 35.5 12.5 × 40 16 × 31.5 0.40 0.46 0.53 0.62 16 × 35.5 0.72 18 × 31.5 0.72 16 × 31.5 0.76 16 × 35.5 0.77 16 × 40 0.83 18 × 31.5 0.81 18 × 31.5 0.77 18 × 35.5 0.83 16 × 35.5 0.88 16 × 40 0.88 18 × 40 0.95 18 × 31.5 0.87 18 × 35.5 0.88 18 × 35.5 1.01 18 × 40 1.01 18 × 40 1.13 22 × 40 1.15 470 471 22 × 40 1.20 561 821 12.5 × 31.5 0.24 12.5 × 35.5 391 820 0.20 12.5 × 31.5 0.31 331 681 12.5 × 25 0.27 390 680 0.18 12.5 × 25 330 560 12.5 × 25 0.29 10 × 31.5 10 × 31.5 22 × 50 1.50 25 × 40 1.50 25 × 50 1.60 22 × 50 1.50 25 × 40 1.50 25 × 50 1.60 22 × 40 1.05 22 × 50 1.45 25 × 40 1.45 25 × 50 1.55 16 × 31.5 16 × 31.5 0.46 0.50 16 × 35.5 0.58 18 × 31.5 0.58 16 × 40 0.66 18 × 35.5 0.67 18 × 40 0.77 22 × 40 0.15 0.17 10 × 31.5 0.85 22 × 50 1.30 25 × 40 1.30 25 × 50 1.40 0.36 16 × 31.5 0.38 16 × 31.5 0.43 16 × 35.5 0.44 16 × 35.5 0.51 16 × 40 0.49 18 × 31.5 0.51 18 × 31.5 0.48 16 × 40 0.57 18 × 31.5 0.57 18 × 35.5 0.55 18 × 35.5 0.61 18 × 40 0.65 18 × 40 0.66 22 × 40 0.77 22 × 40 0.80 22 × 50 0.92 25 × 40 0.92 25 × 50 1.10 22 × 50 0.95 25 × 40 0.95 25 × 50 1.20 Case size φ D × L(mm) : Rated ripple current (Arms) at 105°C 120Hz : In this case, 6 will be put at 12th digit of type numbering system. Frequency coefficient of rated ripple current Frequency 50Hz 120Hz 300Hz 1kHz 10kHz or more Coefficient 0.80 1.00 1.25 1.40 1.60 243 CAT.8100H