UPV1E470MGD1TD

ALUMINUM ELECTROLYTIC CAPACITORS UPV Miniature Sized, Low Impedance, High Reliability Miniature sized low impedance series withstanding 5000 hours load life at +105°C. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). Valued marked with an ※ in the dimension table are scheduled to be discontinued and are not recommended for new designs. UPJ Long Life UPV Specifications Item Performance Characteristics Category Temperature Range –55 to +105°C Rated Voltage Range 6.3 to 50V Rated Capacitance Range 1.5 to 390µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current ※ After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.03CV or 4 (µA), whichever is greater. Measurement frequency : 120Hz at 20°C Tangent of loss angle (tan δ) 6.3 0.22 Rated voltage (V) tan δ (max.) 10 0.19 16 0.16 25 0.14 35 0.12 50 0.10 Measurement frequency : 120Hz Rated voltage (V) Impedance ratio (max.) Z(–55°C) / Z(+20°C) Stability at Low Temperature 6.3 5 Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 5000 hours at 105°C. Shelf Life After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed at right. Marking Printed with white color letter on dark brown sleeve. 10 5 16 4 25 3 35 3 50 2 Capacitance change tan δ Leakage current Within ± 30% of the initial capacitance value 300% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current Within ± 20% of the initial capacitance value 150% or less than the initial specified value Less than or equal to the initial specified value ※ I : Leakage Current (μA), C : Rated Capacitance (μF), V : Rated Voltage (V) Type numbering system (Example : 25V 47µF) Radial Lead Type 1 2 3 4 5 6 7 8 9 10 11 U P V 1 E 4 7 0 MGD Sleeve (PET) φd Configuration P±0.5 φD+0.5max. Capacitance tolerance (±20%) Rated capacitance (47µF) Rated voltage (25V) Series name Pressure relief vent (φ6.3up ) Type L±1.5 15min. (mm) 4min. φD 5 6.3 8 P 2.0 2.5 3.5 φd 0.5 0.5 0.6 Configuration φD Pb-free leadwire Pb-free PET sleeve 5 FD 6.3 ,8 GD  lease refer to the Guidelines for Aluminum Electrolytic Capacitors P for end seal configuration information. • Frequency coefficient of rated ripple current 390 220 150 (10kHz to 200kHz=1) 100 68 Cap.(μF) 47 33 22 120Hz 300Hz 1kHz 15 10 1.5 0 Dimension table in next page. 0.5 0.6 0.7 0.8 0.9 1.0 Frequency coefficient CAT.8100L ALUMINUM ELECTROLYTIC CAPACITORS UPV Dimensions Rated Voltage （V） （code） 6.3 （0J） Case Size φD×L（mm） tan δ 100 5×11 0.22 18.9 1.50 150 ※UPV0J101MFD 120 5×11 0.22 22.68 1.10 175 ※UPV0J121MFD 150 6.3× 11 0.22 28.35 0.83 225 ※UPV0J151MGD 180 6.3× 11 0.22 34.02 0.66 250 ※UPV0J181MGD 220 6.3× 11 Part Number 0.22 41.58 0.51 285 ※UPV0J221MGD 0.22 51.03 0.41 370 　UPV0J271MGD 330 8×11.5 0.22 62.37 0.34 405 　UPV0J331MGD 8×11.5 0.22 73.71 0.29 445 　UPV0J391MGD 5×11 0.19 20.4 1.40 155 ※UPV1A680MFD 82 5× 11 0.19 24.6 1.10 175 ※UPV1A820MFD 100 6.3× 11 0.19 30 0.94 210 ※UPV1A101MGD 120 6.3× 11 0.19 36 0.75 235 ※UPV1A121MGD 150 6.3× 11 0.19 45 0.60 265 ※UPV1A151MGD 180 6.3× 11 0.19 54 0.49 290 ※UPV1A181MGD 220 8×11.5 0.19 66 0.41 370 　UPV1A221MGD 270 8×11.5 0.19 81 0.34 405 　UPV1A271MGD 330 8×11.5 0.19 99 0.27 460 　UPV1A331MGD 47 5×11 0.16 22.56 1.40 155 ※UPV1C470MFD 56 5× 11 0.16 26.88 1.10 175 ※UPV1C560MFD 68 6.3× 11 0.16 32.64 0.85 220 ※UPV1C680MGD 82 6.3× 11 0.16 39.36 0.71 240 ※UPV1C820MGD 100 6.3× 11 0.16 48 0.60 265 ※UPV1C101MGD 120 6.3× 11 0.16 57.6 0.49 290 ※UPV1C121MGD 150 8×11.5 0.16 72 0.39 375 　UPV1C151MGD 180 8×11.5 0.16 86.4 0.34 405 　UPV1C181MGD 105.6 220 25 （1E） ） 8×11.5 68 16 （1C） （ 270 390 10 （1A） Leakage Current Rated Ripple Impedance（Ω） （µA） （mArms） max. at 20℃ after （20℃/100kHz） （105℃/100kHz） 1 minute Rated Capacitance （µF） 8×11.5 0.16 0.27 460 　UPV1C221MGD 33 5×11 0.14 24.75 1.40 155 ※UPV1E330MFD 39 5× 11 0.14 29.25 1.10 175 ※UPV1E390MFD 47 6.3× 11 0.14 35.25 0.94 210 ※UPV1E470MGD 56 6.3× 11 0.14 42 0.75 235 ※UPV1E560MGD 68 6.3× 11 0.14 51 0.61 260 ※UPV1E680MGD 82 6.3× 11 0.14 61.5 0.51 285 ※UPV1E820MGD 75 0.41 370 　UPV1E101MGD 100 8×11.5 0.14 120 8×11.5 0.14 90 0.34 405 　UPV1E121MGD 150 8×11.5 0.14 112.5 0.27 460 　UPV1E151MGD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100L ALUMINUM ELECTROLYTIC CAPACITORS UPV Dimensions Rated Voltage （V） （code） 35 （1V） Case Size φD×L（mm） tan δ 22 5× 11 0.12 23.1 1.30 160 ※UPV1V220MFD 27 5×11 0.12 28.35 1.00 180 ※UPV1V270MFD 33 6.3× 11 0.12 34.65 0.83 225 ※UPV1V330MGD 39 6.3× 11 0.12 40.95 0.70 245 ※UPV1V390MGD 47 6.3× 11 0.12 49.35 0.58 270 ※UPV1V470MGD 56 6.3× 11 0.12 58.8 0.48 295 ※UPV1V560MGD 0.12 71.4 0.41 370 　UPV1V680MGD 68 50 （1H） Leakage Current Rated Ripple Impedance（Ω） （µA） （mArms） max. at 20℃ after （20℃/100kHz） （105℃/100kHz） 1 minute Rated Capacitance （µF） 8×11.5 （ ） 86.1 Part Number 82 8×11.5 0.12 0.32 415 　UPV1V820MGD 100 8×11.5 0.12 105 0.27 460 　UPV1V101MGD 1.5 5× 11 0.10 4 11.00 45 ※UPV1H1R5MFD 2.2 5× 11 0.10 4 7.00 54 ※UPV1H2R2MFD 3.3 5× 11 0.10 4.95 4.60 66 ※UPV1H3R3MFD 4.7 5× 11 0.10 7.05 3.10 81 ※UPV1H4R7MFD 6.8 5× 11 0.10 10.2 2.50 91 ※UPV1H6R8MFD 10 5× 11 0.10 15 2.00 115 ※UPV1H100MFD 12 5× 11 0.10 18 1.70 125 ※UPV1H120MFD 15 5×11 0.10 22.5 1.30 145 ※UPV1H150MFD 18 5×11 0.10 27 1.10 155 ※UPV1H180MFD 22 6.3× 11 0.10 33 0.91 195 ※UPV1H220MGD 27 6.3× 11 0.10 40.5 0.74 215 ※UPV1H270MGD 33 6.3× 11 0.10 49.5 0.60 240 ※UPV1H330MGD 39 6.3× 11 0.10 58.5 0.50 260 ※UPV1H390MGD 47 8×11.5 0.10 70.5 0.42 330 　UPV1H470MGD 56 8×11.5 0.10 84 0.35 360 　UPV1H560MGD 68 8×11.5 0.10 102 0.28 410 　UPV1H680MGD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100L