UPV1H390MGD1TD

ALUMINUM ELECTROLYTIC CAPACITORS UPV Miniature Sized, Low Impedance, High Reliability Miniature sized low impedance series withstanding 5000 hours load life at +105°C. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). UPJ Long Life UPV Specifications Item Performance Characteristics Category Temperature Range –55 to +105°C Rated Voltage Range 6.3 to 50V Rated Capacitance Range 1.5 to 390µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.03CV or 4 (µA), whichever is greater. Measurement frequency : 120Hz at 20°C Tangent of loss angle (tan δ) 6.3 0.22 Rated voltage (V) tan δ (MAX.) 10 0.19 16 0.16 25 0.14 35 0.12 50 0.10 Measurement frequency : 120Hz Rated voltage (V) Impedance ratio (MAX.) Z– 55°C / Z+20°C Stability at Low Temperature 6.3 5 Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 5000 hours at 105°C. Shelf Life After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed at right. Marking Printed with white color letter on dark brown sleeve. 10 5 16 4 25 3 35 3 50 2 Capacitance change tan δ Leakage current Within ± 30% of the initial capacitance value 300% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current Within ± 20% of the initial capacitance value 150% or less than the initial specified value Less than or equal to the initial specified value Type numbering system (Example : 25V 47µF) Radial Lead Type 1 2 3 4 5 6 7 8 9 10 11 U P V 1 E 4 7 0 MGD Sleeve (P.E.T.) φd Configuration Rated capacitance (47µF) P±0.5 φD+0.5 MAX. Capacitance tolerance (±20%) Rated voltage (25V) Series name Pressure relief vent (φ6.3up ) Type L+1.5 MAX. 15MIN (mm) 4MIN φD 5 6.3 8 P 2.0 2.5 3.5 φd 0.5 0.5 0.6 Configuration φD Pb-free leadwire Pb-free PET sleeve 5 FD 6.3 ,8 GD Please refer to the Guidelines for Aluminum Electrolytic Capacitors for end seal configuration information. • Frequency coefficient of rated ripple current 390 220 150 (10kHz to 200kHz=1) 100 68 Cap.(μF) 47 33 22 120Hz 300Hz 1kHz 15 10 1.5 0 0.5 0.6 0.7 0.8 0.9 1.0 Frequency coefficient Dimension table in next page. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UPV Dimensions Rated Voltage （V） （code） 6.3 （0J） Case Size φD×L（mm） tan δ 100 5× 11 0.22 18.9 1.50 150 UPV0J101MFD 120 5× 11 0.22 22.68 1.10 175 UPV0J121MFD 16 （1C） 25 （1E） （ ） Part Number 150 6.3×11 0.22 28.35 0.83 225 UPV0J151MGD 180 6.3× 11 0.22 34.02 0.66 250 UPV0J181MGD 220 6.3× 11 0.22 41.58 0.51 285 UPV0J221MGD 270 8×11.5 0.22 51.03 0.41 370 UPV0J271MGD 330 8×11.5 0.22 62.37 0.34 405 UPV0J331MGD 390 8×11.5 0.22 73.71 0.29 445 UPV0J391MGD 5×11 0.19 20.4 1.40 155 UPV1A680MFD 68 10 （1A） Leakage Current Rated Ripple Impedance（Ω） （µA） （mArms） MAX. at 20℃ after （20℃/100kHz） （105℃/100kHz） 1 minute Rated Capacitance （µF） 82 5× 11 0.19 24.6 1.10 175 UPV1A820MFD 100 6.3× 11 0.19 30 0.94 210 UPV1A101MGD 120 6.3× 11 0.19 36 0.75 235 UPV1A121MGD 150 6.3×11 0.19 45 0.60 265 UPV1A151MGD 180 6.3×11 0.19 54 0.49 290 UPV1A181MGD 220 8× 11.5 0.19 66 0.41 370 UPV1A221MGD 270 8× 11.5 0.19 81 0.34 405 UPV1A271MGD 330 8× 11.5 0.19 99 0.27 460 UPV1A331MGD 47 5× 11 0.16 22.56 1.40 155 UPV1C470MFD 56 5×11 0.16 26.88 1.10 175 UPV1C560MFD 68 6.3×11 0.16 32.64 0.85 220 UPV1C680MGD 82 6.3×11 0.16 39.36 0.71 240 UPV1C820MGD 100 6.3×11 0.16 48 0.60 265 UPV1C101MGD 120 6.3×11 0.16 57.6 0.49 290 UPV1C121MGD 150 8× 11.5 0.16 72 0.39 375 UPV1C151MGD 180 8× 11.5 0.16 86.4 0.34 405 UPV1C181MGD 220 105.6 8× 11.5 0.16 0.27 460 UPV1C221MGD 33 5× 11 0.14 24.75 1.40 155 UPV1E330MFD 39 5×11 0.14 29.25 1.10 175 UPV1E390MFD 47 6.3×11 0.14 35.25 0.94 210 UPV1E470MGD 56 6.3×11 0.14 42 0.75 235 UPV1E560MGD 68 6.3×11 0.14 51 0.61 260 UPV1E680MGD 82 6.3×11 0.14 61.5 0.51 285 UPV1E820MGD 75 0.41 370 UPV1E101MGD 100 8× 11.5 0.14 120 8× 11.5 0.14 90 0.34 405 UPV1E121MGD 150 8× 11.5 0.14 112.5 0.27 460 UPV1E151MGD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UPV Dimensions Rated Voltage （V） （code） 35 （1V） Case Size φD×L（mm） tan δ 22 5× 11 0.12 23.1 1.30 160 UPV1V220MFD 27 5× 11 0.12 28.35 1.00 180 UPV1V270MFD 33 6.3× 11 0.12 34.65 0.83 225 UPV1V330MGD 39 6.3× 11 0.12 40.95 0.70 245 UPV1V390MGD 47 6.3× 11 0.12 49.35 0.58 270 UPV1V470MGD 56 6.3× 11 0.12 58.8 0.48 295 UPV1V560MGD 0.12 71.4 0.41 370 UPV1V680MGD 68 8× 11.5 （ ） 86.1 Part Number 82 8×11.5 0.12 0.32 415 UPV1V820MGD 100 8× 11.5 0.12 105 0.27 460 UPV1V101MGD 1.5 5× 11 0.10 4 11.00 45 UPV1H1R5MFD 2.2 5× 11 0.10 4 7.00 54 UPV1H2R2MFD 3.3 5×11 0.10 4.95 4.60 66 UPV1H3R3MFD 4.7 5× 11 0.10 7.05 3.10 81 UPV1H4R7MFD 6.8 5× 11 0.10 10.2 2.50 91 UPV1H6R8MFD 5× 11 0.10 15 2.00 115 UPV1H100MFD 10 50 （1H） Leakage Current Rated Ripple Impedance（Ω） （µA） （mArms） MAX. at 20℃ after （20℃/100kHz） （105℃/100kHz） 1 minute Rated Capacitance （µF） 12 5× 11 0.10 18 1.70 125 UPV1H120MFD 15 5×11 0.10 22.5 1.30 145 UPV1H150MFD 18 5× 11 0.10 27 1.10 155 UPV1H180MFD 22 6.3× 11 0.10 33 0.91 195 UPV1H220MGD 27 6.3× 11 0.10 40.5 0.74 215 UPV1H270MGD 33 6.3× 11 0.10 49.5 0.60 240 UPV1H330MGD 39 6.3× 11 0.10 58.5 0.50 260 UPV1H390MGD 47 8× 11.5 0.10 70.5 0.42 330 UPV1H470MGD 56 8× 11.5 0.10 84 0.35 360 UPV1H560MGD 68 8× 11.5 0.10 102 0.28 410 UPV1H680MGD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100K