UPX1V472MHD

ALUMINUM ELECTROLYTIC CAPACITORS PX Long Life Assurance series Load life of 20000 hours at 105°C. Adapted to the RoHS directive (2002/95/EC). PM Long Life PX Specifications Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current tan δ Item 10 16 25 35 Measurement frequency : 120Hz Rated voltage (V) tan δ (MAX) 0.20 0.16 0.14 0.12 Temperature : 20ûC For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. 10 16 25 35 Measurement frequency : 120Hz Rated voltage (V) Stability at Low Temperature Impedance ratio ZÐ25ûC / Z+20ûC 3 2 2 2 (MAX.) ZÐ40ûC / Z+20ûC 4 4 4 4 Endurance Shelf Life Marking Performance Characteristitcs Ð55 ~ +105ûC 10 ~ 35V 1 ~ 4700µF ±20% (120Hz, 20ûC) After 1 minute's application of rated voltage, leakage current is not more than 0.03CV or 4 (µA), whichever is greater. After an application of D.C. bias voltage plus the rated ripple current for 20000 hours at 105ûC, the peak voltage shall not exceed the rated D.C. voltage, capacitor meet the characteristic requirements listed below. Capacitance change Within ±30% of initial value 300% or less of initial specified value tan δ Leakage current Initial specified value or less After storing the capacitors under no load at 105ûC for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20¡C, they will meet the specified value for endurance characteristics listed above. Printed with white color letter on dark brown sleeve. Radial Lead Type Sleeve (P.E.T.) D+0.5MAX. φ Type numbering system (Example : 16V 220µF) d U PX 1C 2 2 1 MPD Configuration Capacitance tolerance (±20%) Rated Capacitance (220µF) Rated voltage (16V) Series name Type Configuration Pb-free leadwire φD Pb-free PET sleeve 10 PD 12.5 ~ 18 HD P ± 0.5 1 2 3 4 5 6 7 8 9 10 11 φ Pressure relief vent L + 1.5MAX. 15 MIN 4 MIN φ D P φd 10 5.0 0.6 12.5 5.0 0.6 16 7.5 0.8 18 7.5 0.8 (mm) • Please refer to page 21 about the end seal configulation. Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. Dimension table in next page. CAT.8100V ALUMINUM ELECTROLYTIC CAPACITORS PX series Dimensions V (Code) 10 (1A) Case size 16 (1C) Case size (mArms) 25 (1E) Case size (mArms) 35 (1V) Case size (mArms) Cap. Item Code (mF) fD ´ Rated Ripple 105ûC / 100kHz L (mm) fD ´ Rated Ripple 105ûC / 100kHz L (mm) fD ´ Rated Ripple 105ûC / 100kHz L (mm) fD ´ Rated Ripple (mArms) 105ûC / 100kHz 59 84 101 143 294 336 378 420 672 1008 1344 1680 2184 L (mm) 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 2200 3300 4700 010 2R2 3R3 4R7 100 220 330 470 101 221 331 471 102 222 332 472 ´ 16 ´ 20 12.5 ´ 25 16 ´ 31.5 18 ´ 35.5 18 ´ 40 10 10 504 672 1008 1680 2016 2184 ´ 16 10 ´ 20 12.5 ´ 20 16 ´ 25 18 ´ 35.5 18 ´ 40 10 504 672 1008 1344 2016 2184 12.5 ´ 12.5 ´ 20 12.5 ´ 25 16 ´ 25 16 ´ 31.5 10 420 840 1008 1344 1680 ´ 12.5 10 ´ 12.5 10 ´ 12.5 10 ´ 12.5 10 ´ 12.5 10 ´ 12.5 10 ´ 12.5 10 ´ 12.5 10 ´ 20 12.5 ´ 25 16 ´ 25 16 ´ 31.5 18 ´ 40 10 Frequency coefficient of rated ripple current Frequency Coefficient 120Hz 0.75 1kHz 0.8 10kHz 0.9 100kHz ~ 1.0 CAT.8100V