UPZ2D560MHD

ALUMINUM ELECTROLYTIC CAPACITORS PZ High Voltage, Smaller-sized series High ripple current. Load life of 2000 hours at 105°C. Suited for ballast applications. Adapted to the RoHS directive (2002/95/EC). PT Smaller PZ Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current tan δ Performance Characteristics – 25 ~ +105°C 200 ~ 450V 18 ~ 470µF ± 20% at 120Hz, 20°C After 1 minutes' application of rated voltage, leakage current is not more than 0.04CV+100 (µA). Measurement frequency : 120Hz, Rated voltage (V) tan δ ( MAX.) Temperature : 20°C 200 0.12 400 0.15 420 0.20 450 0.20 Measurement frequency : 120Hz Stability at Low Temperature Rated voltage (V) Impedance ratio ZT / Z20 (MAX.) Z–25°C / Z+20°C 200 3 400 8 420 8 450 8 Endurance After an application of D.C. bias voltage plus the rated ripple current for 2000 hours at 105°C the peak voltage shall not exceed the rated D.C. voltage, capacitors meet the characteristic requirements listed at right. Capacitance change tan δ Leakage current Within ± 20% of initial value 200% or less of initial specified value Initial specified value or less Shelf Life Marking After storing the capacitors under no load at 105˚C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. Printed with white color letter on dark brown sleeve. Radial Lead Type Sleeve (P.E.T.) D±0.5MAX. B Type numbering system (Example : 200V 220µF) d U PZ 2D 2 2 1 M HD T P ± 0.5 1 2 3 4 5 6 7 8 9 10 11 12 Size code Configuration Capacitance tolerance (±20%) Rated Capacitance (220µF) Rated voltage (200V) Series name Type B Pressure relief vent L+ 2.0 MAX. 15MIN 4MIN B D 10 12.5 16 18 P 5.0 5.0 7.5 7.5 Bd 0.6 0.8 0.8 0.8 (mm) Configuration Pb-free leadwire BD Pb-free PET sleeve 10 PD 12.5 ~ 18 HD • Please refer to page 21 about the end seal configulation. Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. Dimension table in next page. CAT.8100V ALUMINUM ELECTROLYTIC CAPACITORS PZ Cap.(µF) series Dimensions V Code 200 2D 400 2G 420 W6 450 2W .010 × 31.5 180 200 12.5 × 31.5 280 320 380 440 490 550 550 650 740 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 180 220 270 330 390 470 560 680 820 101 121 151 181 221 271 331 391 471 12.5 × 31.5 12.5 × 35.5 12.5 × 40.0 .016 × 31.5 .016 × 35.5 .018 × 31.5 .016 × 40.0 .018 × 35.5 .018 × 40.0 620 700 800 870 1010 1010 1130 1120 1270 .010 × 31.5 400 .016 × 31.5 .016 × 35.5 .018 × 31.5 .016 × 40.0 .018 × 35.5 .018 × 40.0 580 670 670 770 770 880 12.5 × 31.5 12.5 × 35.5 12.5 × 40.0 370 420 480 12.5 × 31.5 12.5 × 35.5 12.5 × 40.0 .016 × 31.5 .016 × 35.5 .016 × 40.0 .018 × 31.5 .018 × 35.5 .018 × 40.0 310 360 430 510 570 610 610 660 710 .010 × 31.5 240 .010 × 31.5 12.5 × 35.5 12.5 × 40.0 .016 × 31.5 .016 × 35.5 .016 × 40.0 .018 × 31.5 .018 × 35.5 .018 × 40.0 Case size φ D × L (mm) Rated Ripple Rated Ripple (mArms) at 105°C 120Hz : In this case, 6 will be put at 12th digit of type numbering system. Frequency coefficient of rated ripple current V 200 400 ~ 450 60Hz 0.80 0.80 120Hz 1.00 1.00 500Hz 1.20 1.25 1kHz 1.30 1.40 10kHz~ 1.40 1.50 CAT.8100V