UPZ2W470MHD

ALUMINUM ELECTROLYTIC CAPACITORS UPZ High Voltage, Miniature-sized UPT High ripple current. Load life of 2000 hours at 105°C. Suited for ballast applications. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). Smaller UPZ Smaller UPH Specifications Item Performance Characteristics Category Temperature Range – 40 to +105°C Rated Voltage Range 200 to 450V Rated Capacitance Range 18 to 470µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current ※ After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.04CV+100 (µA). Measurement frequency : 120Hz at 20°C Tangent of loss angle (tan δ) 200 0.12 Rated voltage (V) tan δ (max.) 250 0.15 400 0.15 420 0.20 450 0.20 Measurement frequency : 120Hz Stability at Low Temperature Rated voltage (V) Impedance ratio (max.) Z(–25°C) / Z(+20°C) 200 3 250 3 400 8 420 8 450 8 Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 2000 hours at 105°C, the peak voltage shall not exceed the rated voltage. Shelf Life After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on dark brown sleeve. Within ± 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current ※ I : Leakage Current (μA), C : Rated Capacitance (μF), V : Rated Voltage (V) Type numbering system (Example : 200V 220µF) Radial Lead Type • The 12th digit of the part number is 9 or none. 1 φd 2 3 4 5 6 7 8 9 10 11 12 U P Z 2 D 2 2 1 M HD T Sleeve (PET) P±0.5 φD±0.5max. Size code Configuration Capacitance tolerance (±20%) Rated capacitance (220µF) (mm) Pressure relief vent 15min. L± 2.0 4min. φD 10 12.5 16 18 Rated voltage (200V) P 5.0 5.0 7.5 7.5 Series name φd 0.6 0.8 0.8 0.8 Pencil - shaped Type Size code φD 10 • 9 in the 12th digit of the part number. φd Sleeve (PET) Blank, 6 9 Pb-free leadwire Pb-free PET sleeve 12.5 to 18 PD ND HD NY P±0.5 φD±0.5max. Pressure relief vent Type Configuration L± 2.0 15min. 4min. (mm) Frequency coefficient of rated ripple current φD 10 12.5 V 60Hz 120Hz 500Hz 1kHz 10kHz or more P 5.0 5.0 200・250 0.80 1.00 1.20 1.30 1.40 φd 0.6 0.6 400 to 450 0.80 1.00 1.25 1.40 1.50  lease refer to the Guidelines for Aluminum Electrolytic Capacitors P for end seal configuration information. Dimension table in next page. CAT.8100L ALUMINUM ELECTROLYTIC CAPACITORS UPZ Dimensions Rated Voltage （V） （code） Rated Capacitance （µF） 400 （2G） 0.12 756 400 UPZ2D820MPD 0.12 1060 680 UPZ2D121MND9 120 10× 40 150 12.5× 30.5 0.12 1300 620 UPZ2D151MHD 150 10× 50 0.12 1300 830 UPZ2D151MND9 （ ） 180 12.5× 35.5 0.12 1540 700 UPZ2D181MHD 220 12.5×40 0.12 1860 800 UPZ2D221MHD 0.12 2260 870 UPZ2D271MHD 270 16× 30.5 0.12 2260 1265 UPZ2D271MNY9 330 16× 35.5 0.12 2740 1010 UPZ2D331MHD 330 18×30.5 0.12 2740 1010 UPZ2D331MHD6 12.5× 50 390 16× 40 0.12 3220 1130 UPZ2D391MHD 390 18× 35.5 0.12 3220 1120 UPZ2D391MHD6 470 18× 40 0.12 3860 1270 UPZ2D471MHD 82 10× 40 0.15 920 610 UPZ2E820MND9 120 10× 50 0.15 1300 740 UPZ2E121MND9 220 12.5× 50 0.15 2300 1140 UPZ2E221MNY9 0.15 532 240 UPZ2G270MPD 27 10× 30.5 47 12.5× 30.5 0.15 852 370 UPZ2G470MHD 47 10× 40 0.15 852 435 UPZ2G470MND9 56 12.5× 35.5 0.15 996 420 UPZ2G560MHD 56 10×50 0.15 996 520 UPZ2G560MND9 68 12.5×40 0.15 1188 480 UPZ2G680MHD 0.15 1700 580 UPZ2G101MHD 100 100 120 16×30.5 12.5× 50 16× 35.5 0.15 1700 770 UPZ2G101MNY9 0.15 2020 670 UPZ2G121MHD 120 18× 30.5 0.15 2020 670 UPZ2G121MHD6 150 16× 40 0.15 2500 770 UPZ2G151MHD 150 18× 35.5 0.15 2500 770 UPZ2G151MHD6 18× 40 0.15 2980 10× 30.5 0.20 180 22 420 （W6） Part Number 10× 30.5 270 250 （2E） Rated Ripple （mArms） （105℃/120Hz） tan δ 82 200 （2D） Leakage Current （µA） at 20℃ after 1 minute Case Size φD×L（mm） 469.6 880 UPZ2G181MHD 200 UPZW6220MPD 39 12.5×30.5 0.20 755.2 310 UPZW6390MHD 47 12.5× 35.5 0.20 889.6 360 UPZW6470MHD 56 12.5× 40 0.20 1040.8 430 UPZW6560MHD 68 16× 30.5 0.20 1242.4 510 UPZW6680MHD 82 16× 35.5 0.20 1477.6 570 UPZW6820MHD 16×40 0.20 1780 610 UPZW6101MHD 100 100 18× 30.5 0.20 1780 610 UPZW6101MHD6 120 18× 35.5 0.20 2116 660 UPZW6121MHD 150 18× 40 0.20 2620 710 UPZW6151MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100L ALUMINUM ELECTROLYTIC CAPACITORS UPZ Dimensions Rated Voltage （V） （code） 450 （2W） Leakage Current （µA） at 20℃ after 1 minute Rated Ripple （mArms） （105℃/120Hz） Part Number 0.20 424 180 UPZ2W180MPD 12.5× 30.5 0.20 694 280 UPZ2W330MHD 33 10× 40 0.20 694 360 UPZ2W330MND9 39 12.5× 35.5 0.20 802 320 UPZ2W390MHD 47 12.5× 40 0.20 946 380 UPZ2W470MHD 47 10× 50 0.20 946 450 UPZ2W470MND9 56 16× 30.5 0.20 1108 440 UPZ2W560MHD 68 16× 35.5 0.20 1324 490 UPZ2W680MHD 82 16× 40 0.20 1576 550 UPZ2W820MHD 18× 30.5 0.20 1576 550 UPZ2W820MHD6 0.20 1576 730 UPZ2W820MNY9 Rated Capacitance （µF） Case Size φD×L（mm） tan δ 18 10× 30.5 33 82 82 12.5× 50 （ ） 100 18× 35.5 0.20 1900 650 UPZ2W101MHD 120 18× 40 0.20 2260 740 UPZ2W121MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100L