URS2A010MDD1TD

ALUMINUM ELECTROLYTIC CAPACITORS URS Compact & Low-profile Sized Compact & low profile case size. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). URZ High Temperature URS Specifications Item Performance Characteristics Category Temperature Range –40 to +85˚C Rated Voltage Range 6.3 to 400V Rated Capacitance Range 10 to 10000µF Capacitance Tolerance ± 20% at 120Hz, 20˚C Rated voltage (V) Leakage Current 6.3 to 100 After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.03CV. After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV. 160 to 400 After 1 minute's application of rated voltage at 20°C, I = 0.04CV+100 (µA) or less For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Rated voltage (V) tan δ (MAX.) Tangent of loss angle (tan δ) 6.3 0.28 10 0.24 16 0.20 25 0.16 35 0.14 50 0.12 Measurement frequency : 120Hz at 20˚C 63 0.10 100 0.08 160 0.20 200 0.20 250 0.20 400 0.25 Measurement frequency : 120Hz Stability at Low Temperature 6.3 5 12 Rated voltage (V) Impedance ratio Z– 25˚C / Z+20˚C (MAX.) Z– 40˚C / Z+20˚C 10 4 10 35 2 4 25 2 5 16 3 8 50 2 3 63 2 3 Capacitance change tan δ Leakage current 100 2 3 160 3 4 200 3 4 250 3 6 400 6 10 Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 85°C. Shelf Life After storing the capacitors under no load at 85˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on black sleeve. Radial Lead Type Type numbering system (Example : 10V 1000µF) 1 φd Sleeve (P.E.T.) 2 3 4 5 6 7 8 9 10 11 12 URS 1 A 1 0 2 MPD Capacitance tolerance (±20%) P ±0.5 φD+0.5 MAX Size code Configuration Rated capacitance (1000µF) Rated voltage (10V) Series name Pressure relief vent L+ 15MIN MAX Type 4MIN Configuration φD (mm) φD P φd 10 5.0 0.6 12.5 5.0 0.6 16 7.5 0.8 18 7.5 0.8 20 10.0 1.0 10 12.5 to 18 20 Pb-free leadwire Pb-free PET sleeve PD HD RD (φD 20) 1.5 (φD 20) 2.0 Please refer to the Guidelines for Aluminum Electrolytic Capacitors for end seal configuration information. Frequency coefficient of rated ripple current V 6.3 to 100 160 to 400 Cap.(µF) Frequency 47 100 to 470 1000 to 10000 10 to 220 50Hz 0.75 0.80 0.85 0.80 120Hz 1.00 1.00 1.00 1.00 300Hz 1.35 1.23 1.10 1.25 1 kHz 1.57 1.34 1.13 1.40 10kHz or more 2.00 1.50 1.15 1.60 Dimension table in next page. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS URS ■ Dimensions Rated Voltage （V） （code） 6.3 （0J） Rated Capacitance （µF） 35 （1V） 50 （1H） 63 （1J） 160 （2C） 890 URS0J222MHD 623.7 207.9 1200 URS0J332MHD 888.3 296.1 1410 URS0J472MHD 0.38 1285.2 428.4 1660 URS0J682MHD 18× 20 0.46 1890 630 2020 URS0J103MHD 10× 12.5 0.24 300 100 620 URS1A102MPD 0.30 415.8 3300 16× 15 0.32 4700 16× 15 0.34 6800 18× 15 at 20℃ after at 20℃ after 1 minute 2 minutes 2200 12.5× 15 0.26 660 220 960 URS1A222MHD 3300 16× 15 0.28 990 330 1300 URS1A332MHD 4700 18× 15 0.30 1410 470 1550 URS1A472MHD 6800 18× 20 0.34 2040 680 1850 URS1A682MHD 10000 18× 25 0.42 3000 1000 2350 URS1A103MHD 1000 12.5× 12.5 0.20 480 160 720 URS1C102MHD 2200 16× 15 0.22 1056 352 1160 URS1C222MHD 3300 18× 15 0.24 1584 528 1460 URS1C332MHD 4700 18× 20 0.26 2256 752 1770 URS1C472MHD 6800 18× 25 0.30 3264 1088 2170 URS1C682MHD 10× 12.5 0.16 352.5 117.5 530 URS1E471MPD 1000 12.5× 15 0.16 750 250 830 URS1E102MHD 2200 18× 15 0.18 1650 550 1360 URS1E222MHD 3300 18× 20 0.20 2475 825 1720 URS1E332MHD 4700 18× 25 0.22 3525 1175 2050 URS1E472MHD 330 10× 12.5 0.14 480 URS1V331MPD 346.5 470 12.5× 12.5 0.14 1000 16× 15 0.14 1050 493.5 2200 18× 20 0.16 3300 20× 25 0.18 220 10× 12.5 330 470 115.5 590 URS1V471MHD 350 1010 URS1V102MHD 2310 770 1560 URS1V222MHD 3465 1155 2000 URS1V332MRD 0.12 330 110 420 URS1H221MPD 12.5× 12.5 0.12 495 165 530 URS1H331MHD 16× 15 0.12 705 235 750 URS1H471MHD 1000 18× 20 0.12 1500 500 1160 URS1H102MHD 2200 20× 25 0.14 3300 1100 1750 URS1H222MRD 220 12.5× 12.5 0.10 415.8 490 URS1J221MHD 330 12.5× 15 0.10 623.7 207.9 710 URS1J331MHD 470 16× 15 0.10 888.3 296.1 900 URS1J471MHD 10× 12.5 0.08 141 47 230 URS2A470MPD 47 100 （2A） 138.6 12.5× 15 470 25 （1E） Part Number 2200 1000 16 （1C） Rated Ripple （mArms） （85℃/120Hz） tan δ 10000 10 （1A） Leakage Current （µA） Case Size φD×L（mm） 164.5 138.6 100 12.5× 15 0.08 300 100 370 URS2A101MHD 220 16× 15 0.08 660 220 620 URS2A221MHD 330 18× 15 0.08 990 330 760 URS2A331MHD 47 16× 15 0.20 400.8 － 420 URS2C470MHD 68 18× 15 0.20 535.2 － 490 URS2C680MHD 68 16×20 0.20 535.2 － 490 URS2C680MHD6 For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS URS ■ Dimensions Rated Voltage （V） （code） 160 （2C） 200 （2D） 250 （2E） 400 （2G） Rated Capacitance （µF） Case Size φD×L（mm） tan δ 100 18 ×20 0.20 100 20 ×15 150 18 ×25 150 20 ×20 220 33 Leakage Current （µA） at 20℃ after at 20℃ after 1 minute 2 minutes Rated Ripple （mArms） （85℃/120Hz） Part Number 740 － 590 URS2C101MHD 0.20 740 － 590 URS2C101MRD6 0.20 1060 － 710 URS2C151MHD 0.20 1060 － 710 URS2C151MRD6 20 ×25 0.20 1508 － 770 URS2C221MRD 16 ×15 0.20 364 － 350 URS2D330MHD 47 18 ×15 0.20 476 － 420 URS2D470MHD 47 16 ×20 0.20 476 － 420 URS2D470MHD6 68 18× 20 0.20 644 － 490 URS2D680MHD 68 20× 15 0.20 644 － 490 URS2D680MRD6 100 18 ×25 0.20 900 － 590 URS2D101MHD 100 20 ×20 0.20 900 － 590 URS2D101MRD6 150 18 ×25 0.20 1300 － 710 URS2D151MHD 22 16×15 0.20 320 － 280 URS2E220MHD 33 18×15 0.20 430 － 350 URS2E330MHD 33 16 ×20 0.20 430 － 350 URS2E330MHD6 47 18× 20 0.20 570 － 420 URS2E470MHD 47 20× 15 0.20 570 － 420 URS2E470MRD6 68 18×20 0.20 780 － 490 URS2E680MHD 100 18× 25 0.20 1100 － 590 URS2E101MHD 10 16× 15 0.25 260 － 140 URS2G100MHD 22 18 ×15 0.25 452 － 280 URS2G220MHD 22 16 ×20 0.25 452 － 280 URS2G220MHD6 33 18× 20 0.25 628 － 350 URS2G330MHD 47 18× 25 0.25 852 － 420 URS2G470MHD 47 20 ×20 0.25 852 － 420 URS2G470MRD6 68 20 ×25 0.25 1188 － 490 URS2G680MRD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100K