URS2A221MHD

ALUMINUM ELECTROLYTIC CAPACITORS URS Compact & Low-profile Sized Compact & low profile case size. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). URZ High Temperature Valued marked with an ※ in the dimension table are scheduled to be discontinued and are not recommended for new designs. URS Specifications Item Performance Characteristics Category Temperature Range –40 to +85˚C Rated Voltage Range 6.3 to 400V Rated Capacitance Range 10 to 10000µF Capacitance Tolerance ± 20% at 120Hz, 20˚C Rated voltage (V) Leakage Current ※ 6.3 to 100 After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.03CV. After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV. 160 to 400 After 1 minute's application of rated voltage at 20°C, I = 0.04CV+100 (µA) or less For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Rated voltage (V) tan δ (max.) Tangent of loss angle (tan δ) 6.3 0.28 10 0.24 16 0.20 25 0.16 35 0.14 50 0.12 Measurement frequency : 120Hz at 20˚C 63 0.10 100 0.08 160 0.20 200 0.20 250 0.20 400 0.25 Measurement frequency : 120Hz 6.3 5 12 Rated voltage (V) Impedance ratio Z(–25˚C) / Z(+20˚C) (max.) Z(–40˚C) / Z(+20˚C) Stability at Low Temperature 10 4 10 35 2 4 25 2 5 16 3 8 50 2 3 63 2 3 Capacitance change tan δ Leakage current 100 2 3 160 3 4 200 3 4 250 3 6 400 6 10 Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 85°C. Shelf Life After storing the capacitors under no load at 85˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on black sleeve. ※ I : Leakage Current (µA), C : Rated Capacitance (µF), V : Rated Voltage (V) Radial Lead Type Type numbering system (Example : 10V 1000µF) 1 φd Sleeve (PET) 2 3 4 5 6 7 8 9 10 11 12 URS 1 A 1 0 2 MPD P±0.5 φD+ 0.5 max. Size code Configuration Capacitance tolerance (±20%) Rated capacitance (1000µF) Rated voltage (10V) Series name Pressure relief vent 15min. L± Type 4min. Configuration φD (mm) φD P φd 10 5.0 0.6 12.5 5.0 0.6 16 7.5 0.8 18 7.5 0.8 20 10.0 1.0 10 12.5 to 18 20 Pb-free leadwire Pb-free PET sleeve PD HD RD (φD 20) 1.5 (φD 20) 2.0 Please refer to the Guidelines for Aluminum Electrolytic Capacitors for end seal configuration information. Frequency coefficient of rated ripple current V 6.3 to 100 160 to 400 Cap.(µF) Frequency 47 100 to 470 1000 to 10000 10 to 220 50Hz 0.75 0.80 0.85 0.80 120Hz 1.00 1.00 1.00 1.00 300Hz 1.35 1.23 1.10 1.25 1 kHz 1.57 1.34 1.13 1.40 10kHz or more 2.00 1.50 1.15 1.60 Dimension table in next page. CAT.8100L ALUMINUM ELECTROLYTIC CAPACITORS URS ■ Dimensions Rated Voltage （V） （code） 6.3 （0J） Rated Capacitance （µF） 2200 12.5 × 15 0.30 415.8 138.6 890 　URS0J222MHD 3300 16 × 15 0.32 623.7 207.9 1200 　URS0J332MHD 4700 16 × 15 0.34 888.3 296.1 1410 　URS0J472MHD 6800 18 × 15 0.38 1285.2 428.4 1660 　URS0J682MHD 18 × 20 0.46 1890 630 2020 　URS0J103MHD 10 × 12.5 0.24 300 100 620 　URS1A102MPD 1000 16 （1C） 35 （1V） 50 （1H） 63 （1J） 160 （2C） Part Number 2200 12.5 × 15 0.26 660 220 960 　URS1A222MHD 16 × 15 0.28 990 330 1300 　URS1A332MHD 4700 18 × 15 0.30 1410 470 1550 　URS1A472MHD 6800 18 × 20 0.34 2040 680 1850 　URS1A682MHD 10000 18 × 25 0.42 3000 1000 2350 　URS1A103MHD 1000 12.5 × 12.5 0.20 480 160 720 　URS1C102MHD 2200 16 × 15 0.22 1056 352 1160 　URS1C222MHD 3300 18 × 15 0.24 1584 528 1460 　URS1C332MHD 4700 18 × 20 0.26 2256 752 1770 　URS1C472MHD 6800 18 × 25 0.30 3264 1088 2170 　URS1C682MHD 0.16 352.5 117.5 530 　URS1E471MPD 1000 12.5 × 15 0.16 750 250 830 　URS1E102MHD 2200 18 × 15 0.18 1650 550 1360 　URS1E222MHD 3300 18 × 20 0.20 2475 825 1720 　URS1E332MHD 4700 18 × 25 0.22 3525 1175 2050 　URS1E472MHD 330 10 × 12.5 0.14 480 　URS1V331MPD 10 × 12.5 346.5 493.5 115.5 470 12.5 × 12.5 0.14 1000 16 × 15 0.14 1050 2200 18 × 20 0.16 3300 20 × 25 0.18 220 10 × 12.5 0.12 330 12.5 × 12.5 0.12 495 165 530 　URS1H331MHD 470 16 × 15 0.12 705 235 750 　URS1H471MHD 1000 18 × 20 0.12 1500 500 1160 　URS1H102MHD 2200 20 × 25 0.14 3300 1100 1750 ※URS1H222MRD 220 12.5 × 12.5 0.10 490 　URS1J221MHD 330 12.5 × 15 0.10 623.7 207.9 710 　URS1J331MHD 470 16 × 15 0.10 888.3 296.1 900 　URS1J471MHD 10 × 12.5 0.08 141 47 230 　URS2A470MPD 47 100 （2A） at 20℃ after at 20℃ after 1 minute 2 minutes 3300 470 25 （1E） Rated Ripple （mArms） （85℃/120Hz） tan δ 10000 10 （1A） Leakage Current （µA） Case Size φD×L（mm） 590 　URS1V471MHD 350 1010 　URS1V102MHD 2310 770 1560 　URS1V222MHD 3465 1155 2000 ※URS1V332MRD 330 110 420 　URS1H221MPD 415.8 164.5 138.6 100 12.5 × 15 0.08 300 100 370 　URS2A101MHD 220 16 × 15 0.08 660 220 620 　URS2A221MHD 330 18 × 15 0.08 990 330 760 　URS2A331MHD 47 16 × 15 0.20 400.8 － 420 　URS2C470MHD 68 18 × 15 0.20 535.2 － 490 　URS2C680MHD 68 16 × 20 0.20 535.2 － 490 　URS2C680MHD6 For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100L ALUMINUM ELECTROLYTIC CAPACITORS URS ■ Dimensions Rated Voltage （V） （code） Rated Capacitance （µF） 100 160 （2C） 200 （2D） 250 （2E） 400 （2G） Case Size φD×L（mm） 18 × 20 tan δ 0.20 Leakage Current （µA） at 20℃ after at 20℃ after 1 minute 2 minutes 740 Rated Ripple （mArms） （85℃/120Hz） － Part Number 590 　URS2C101MHD 100 20 × 15 0.20 740 － 590 ※URS2C101MRD6 150 18 × 25 0.20 1060 － 710 　URS2C151MHD 150 20 × 20 0.20 1060 － 710 ※URS2C151MRD6 1508 220 20 × 25 0.20 － 770 ※URS2C221MRD 33 16 × 15 0.20 364 － 350 　URS2D330MHD 47 18 × 15 0.20 476 － 420 　URS2D470MHD 47 16 × 20 0.20 476 － 420 　URS2D470MHD6 68 18 × 20 0.20 644 － 490 　URS2D680MHD 68 20 × 15 0.20 644 － 490 ※URS2D680MRD6 100 18 × 25 0.20 900 － 590 　URS2D101MHD 100 20 × 20 0.20 900 － 590 ※URS2D101MRD6 150 18 × 25 0.20 1300 － 710 　URS2D151MHD 22 16 × 15 0.20 320 － 280 　URS2E220MHD 33 18 × 15 0.20 430 － 350 　URS2E330MHD 33 16 × 20 0.20 430 － 350 　URS2E330MHD6 47 18 × 20 0.20 570 － 420 　URS2E470MHD 47 20 × 15 0.20 570 － 420 ※URS2E470MRD6 68 18 × 20 0.20 780 － 490 　URS2E680MHD 100 18 × 25 0.20 1100 － 590 　URS2E101MHD 10 16 × 15 0.25 260 － 140 　URS2G100MHD 22 18 × 15 0.25 452 － 280 　URS2G220MHD 22 16 × 20 0.25 452 － 280 　URS2G220MHD6 33 18 × 20 0.25 628 － 350 　URS2G330MHD 47 18 × 25 0.25 852 － 420 　URS2G470MHD 47 20 × 20 0.25 852 － 420 ※URS2G470MRD6 68 20 × 25 0.25 1188 － 490 ※URS2G680MRD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100L