URU1E102MHD1TO

ALUMINUM  ELECTROLYTIC  CAPACITORS RU 12.5mmL series RY 12.5mmL height. Compliant to the RoHS directive (2011/65/EU). High Temperature RU Products which are scheduled to be discontinued. Not recommended for new designs Specifications Item Performance Characteristics Category Temperature Range – 40 to + 85°C (6.3V to 400V), – 25 to + 85°C (450V) Rated Voltage Range 6.3 to 450V Rated Capacitance Range 6.8 to 6800µF Capacitance Tolerance ± 20% at 120Hz, 20°C Rated voltage (V) Leakage Current 6.3 to 100 160 to 450 After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.03CV or 4 (µA), whichever is greater. For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Tangent of loss angle (tan δ) Rated voltage (V) tan δ (MAX.) 6.3 0.28 10 0.24 16 0.20 25 0.16 After 1 minute's application of rated voltage at 20°C, I = 0.04CV+100 (µA) or less Measurement frequency : 120Hz at 20°C 35 0.14 50 0.12 63 0.12 100 0.12 160 to 350 400 to 450 0.20 0.25 Measurement frequency : 120Hz Stability at Low Temperature Rated voltage (V) Impedance ratio Z– 25˚C / Z+20˚C ZT / Z20 (MAX.) Z– 40˚C / Z+20˚C 6.3 5 12 10 4 10 The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 85°C. Endurance 16 3 8 50 to 100 160 to 200 250 to 350 2 3 4 3 4 8 35 25 2 5 2 4 Capacitance change tan δ Leakage current 400 6 10 450 15 Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Printed with white color letter on black sleeve. Shelf Life Marking Radial Lead Type Type numbering system (Example : 10V 2200µF) 1 φd Sleeve (P.E.T.) 2 3 4 5 6 7 8 9 10 11 URU 1 A 2 2 2 M HD P±0.5 φD+0.5 MAX Configuration Capacitance tolerance (±20%) Rated capacitance (2200μF) Rated voltage (10V) Pressure relief vent L+ Series name MAX 15MIN 4MIN Type (mm) (φD < 20) 1.5 (φD 20) 2.0 φD P φd 12.5 5.0 0.6 16 7.5 0.8 18 7.5 0.8 20 10 1.0 22 10 1.0 25 12.5 1.0 Configuration φD Pb-free leadwire Pb-free PET sleeve 12.5 to 18 HD 20 to 25 RD • Please refer to page 20 about the end seal configuration. Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. CAT.8100D ALUMINUM ELECTROLYTIC CAPACITORS RU series Dimensions V Cap.(µF) 330 470 680 1000 2200 3300 4700 6800 6.3 0J Code 331 471 681 102 222 332 472 682 16 × 12.5 20 × 12.5 25 × 12.5 12.5 × 12.5 800 18 × 12.5 1460 25 × 12.5 1600 63 1J 100 2A V Cap.(µF) 22 33 47 68 100 220 330 470 680 Code 220 330 470 680 101 221 331 471 681 12.5 × 12.5 18 × 12.5 22 × 12.5 25 × 12.5 12.5 × 12.5 490 22 × 12.5 710 25 × 12.5 900 1200 350 2V 400 2G V Cap.(µF) 06.8 100. 220. 330. 470. Code 6R8 100 220 330 470 10 1A 110 230 230 280 12.5 × 12.5 18 × 12.5 20 × 12.5 25 × 12.5 16 × 12.5 20 × 12.5 25 × 12.5 16 1C 870 1100 1480 20 × 12.5 25 × 12.5 25 1E 12.5 × 12.5 1200 25 × 12.5 1410 160 2C 12.5 × 12.5 16 × 12.5 18 × 12.5 330 22 × 12.5 620 760 230 280 330 380 200 2D 12.5 × 12.5 16 × 12.5 18 × 12.5 22 × 12.5 25 × 12.5 35 1V 12.5 × 12.5 750 18 × 12.5 1380 190 230 280 330 380 250 2E 16 × 12.5 18 × 12.5 20 × 12.5 25 × 12.5 720 850 190 230 280 330 50 1H 12.5 × 12.5 16 × 12.5 20 × 12.5 25 × 12.5 530 600 750 930 Case size φ D × L (mm) Rated ripple 315 2F 16 × 12.5 20 × 12.5 25 × 12.5 190 230 280 450 2W 12.5 × 12.5 110 16 × 12.5 230 22 × 12.5 280 70 80 160 Rated ripple current (mArms) at 85°C 120Hz Frequency coefficient of rated ripple current V 6.3 to 100 160 to 450 Cap.(µF) Frequency 100 to 680 1000 to 6800 6.8 to 100 50Hz 0.80 0.85 0.80 120Hz 1.00 1.00 1.00 300Hz 1.23 1.10 1.25 1 kHz 1.34 1.13 1.40 10kHz or more 1.50 1.15 1.60 CAT.8100D