URY2E222MRD

ALUMINUM ELECTROLYTIC CAPACITORS RY 12.5mmL Wide Temperature Range series 12.5mmL height. Adapted to the RoHS directive (2002/95/EC). RY High Temperature RU Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Performance Characteristics – 55 ~ +105°C (6.3 ~ 100V), – 40 ~ +105°C (160 ~ 400V), – 25 ~ +105°C (450V) 6.3 ~ 450V 6.8 ~ 4700µF ± 20% at 120Hz, 20°C Rated voltage (V) 6.3 ~ 100 After 1 minute's application of rated voltage, leakage current is not more than 0.03CV or4 (µA), whichever is greater. After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA), whichever is greater. For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. 160 ~ 450 After 1 minute's application of rated voltage, Leakage Current I = 0.04CV+100 (µA) or less Measurement frequency : 120Hz, Temperature : 20°C tan δ Rated voltage (V) tan δ ( MAX.) 6.3 0.28 10 0.24 6.3 5 10 16 0.20 10 4 8 25 0.16 16 3 6 35 0.14 25 2 4 50 0.12 35~ 50 63 0.10 100 0.08 160 ~ 350 400 ~ 450 0.20 0.25 400 6 10 450 15 Measurement frequency : 120Hz Stability at Low Temperature Rated voltage ( V) Impedance ratio Z– 25˚C / Z+20˚C ZT / Z20 (MAX.) Z– 40˚C / Z+20˚C 2 3 63~ 100 160 ~ 200 250 ~ 350 2 3 4 3 4 8 Endurance After 2000 hours' application of rated voltage at 105°C, capacitors meet the characteristic requirements listed at right. Capacitance change tan δ Leakage current Within ± 20% of initial value 200% or less of initial specified value Initial specified value or less Shelf Life Marking After storing the capacitors under no load at 105°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. Printed with white color letter on black sleeve. Radial Lead Type Sleeve (P.E.T.) Type numbering system (Example : 10V 2200µF) φd 1 2 3 4 5 6 7 8 9 10 11 URY 1 A 2 2 2 MHD φD+0.5 MAX P ± 0.5 Configuration Capacitance tolerance (±20%) Rated Capacitance (2200µF) Pressure relief vent L+ MAX Rated voltage (10V) 15MIN 4MIN (mm) Series name Type Configuration φD 12.5 ~ 18 20 ~ 25 Pb-free leadwire Pb-free PET sleeve (φ D < 20) 1.5 (φ D 20) 2.0 φD P 12.5 5.0 0.6 16 7.5 0.8 18 7.5 0.8 20 10.0 1.0 22 10.0 1.0 25 12.5 1.0 φd HD RD • Please refer to page 21 about the end seal configulation. Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. Dimension table in next page. CAT.8100V ALUMINUM ELECTROLYTIC CAPACITORS RY Cap.(µF) series Dimensions V Code 6.3 0J 10 1A 16 1C 25 1E 35 1V 12.5 × 12.5 18 × 12.5 22 × 12.5 420 610 810 330 470 680 1000 2200 3300 4700 331 471 681 102 222 332 472 12.5 × 12.5 18 × 12.5 25 × 12.5 580 730 1200 18 × 12.5 22 × 12.5 820 1030 12.5 × 12.5 25 × 12.5 520 1000 12.5 × 12.5 18 × 12.5 25 × 12.5 500 770 1170 50 1H 12.5 × 12.5 20 × 12.5 25 × 12.5 450 540 700 Case size Rated ripple φ D × L (mm) V Cap.(µF) Code 63 1J 100 2A 160 2C 200 2D 12.5 × 12.5 16 × 12.5 18 × 12.5 25 × 12.5 110 170 230 310 250 2E 16 × 12.5 18 × 12.5 22 × 12.5 130 170 190 10 22 33 47 68 100 220 330 470 100 220 330 470 680 101 221 331 471 12.5 × 12.5 18 × 12.5 22 × 12.5 400 550 610 12.5 × 12.5 22 × 12.5 230 400 12.5 × 12.5 16 × 12.5 20 × 12.5 25 × 12.5 130 210 280 360 315 2F 12.5 × 12.5 16 × 12.5 20 × 12.5 25 × 12.5 70 85 120 160 V Cap.(µF) Code 350 2V 16 × 12.5 18 × 12.5 25 × 12.5 75 90 140 400 2G 16 × 12.5 20 × 12.5 25 × 12.5 65 150 200 6.8 10 22 33 6R8 100 220 330 450 2W 12.5 × 12.5 16 × 12.5 25 × 12.5 38 47 85 Rated Ripple (mArms) at 105°C 120Hz Frequency coefficient of rated ripple current V Cap.(µF) Frequency 6.3 ~ 100 160 ~ 450 100 ~ 680 1000 ~ 4700 6.8 ~ 100 50Hz 0.80 0.85 0.80 120Hz 1.00 1.00 1.00 300Hz 1.23 1.10 1.25 1 kHz 1.34 1.13 1.40 10 kHz ~ 1.50 1.15 1.60 CAT.8100V