URZ1H010MDD1TD

ALUMINUM  ELECTROLYTIC  CAPACITORS URZ Compact & Low-Profile Sized, Wide Temperature Range Wide temperature range and same size as URS. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). URZ High Temperature URS Specifications Item Performance Characteristics Category Temperature Range –55 to +105˚C Rated Voltage Range 16 to 100V Rated Capacitance Range 47 to 6800µF Capacitance Tolerance ± 20% at 120Hz, 20˚C Leakage Current ※ After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.03CV(μA). After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV(μA). For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Tangent of loss angle (tan δ) Rated voltage (V) tan δ (max.) Stability at Low Temperature Impedance ratio (max.) 16 0.20 25 0.16 Rated voltage (V) Z(–25˚C) / Z(+20˚C) Z(–40˚C) / Z(+20˚C) 35 0.14 50 0.12 63 0.10 100 0.08 16 3 6 25 2 4 35 2 3 50 2 3 Measurement frequency : 120Hz at 20˚C 100 2 3 63 2 3 Measurement frequency : 120Hz Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 105°C. Shelf Life After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on black sleeve. ※ I : Leakage Current (μA), C : Rated Capacitance (μF), V : Rated Voltage (V) Radial Lead Type Type numbering system (Example : 16V 1000µF) 1 φd Sleeve (PET) 2 3 4 5 6 7 8 9 10 11 UR Z 1 C 1 0 2 MHD 12 Size code Capacitance tolerance (±20%) P±0.5 φD+0.5max. Configuration Rated capacitance (1000µF) Rated voltage (16V) Pressure relief vent Series name 15min. L ±1.5 Type 4min. Configuration (mm) φD 10 12.5 16 18 φD P 5.0 5.0 7.5 7.5 φd 0.6 0.6 0.8 0.8 10 12.5 to 18 Pb-free leadwire Pb-free PET sleeve PD HD  lease refer to the Guidelines for Aluminum Electrolytic Capacitors P for end seal configuration information. Frequency coefficient of rated ripple current Cap.(µF) Frequency 47 100 to 470 1000 to 6800 50Hz 0.75 0.80 0.85 120Hz 1.00 1.00 1.00 300Hz 1.35 1.23 1.10 1 kHz 1.57 1.34 1.13 10kHz or more 2.00 1.50 1.15 Dimension table in next page. CAT.8100N ALUMINUM  ELECTROLYTIC  CAPACITORS URZ ■ Dimensions Rated Voltage （V） （code） Rated Capacitance （µF） 1000 16 （1C） 63 （1J） 480 160 Part Number 520 　URZ1C102MHD 16× 15 0.22 1056 352 830 　URZ1C222MHD 0.24 1584 528 1050 　URZ1C332MHD 4700 18× 20 0.26 2256 752 1260 　URZ1C472MHD 18× 25 0.30 3264 1088 1560 　URZ1C682MHD 10× 12.5 0.16 370 　URZ1E471MPD 352.5 117.5 1000 12.5×15 0.16 750 250 590 　URZ1E102MHD 2200 18× 15 0.18 1650 550 970 　URZ1E222MHD 3300 18 ×20 0.20 2475 825 1220 　URZ1E332MHD 3525 1175 18 ×25 0.22 330 10 ×12.5 0.14 346.5 493.5 1470 　URZ1E472MHD 115.5 340 　URZ1V331MPD 470 12.5× 12.5 0.14 164.5 420 　URZ1V471MHD 1000 16 ×15 0.14 1050 350 720 　URZ1V102MHD 2200 18 ×20 0.16 2310 770 1110 　URZ1V222MHD 220 10 ×12.5 0.12 330 110 290 　URZ1H221MPD 330 12.5× 12.5 0.12 495 165 370 　URZ1H331MHD 470 16 ×15 0.12 705 235 540 　URZ1H471MHD 1000 18×20 0.12 1500 500 830 　URZ1H102MHD 220 12.5 ×12.5 0.10 138.6 335 　URZ1J221MHD 330 12.5 ×15 0.10 623.7 207.9 510 　URZ1J331MHD 470 16× 15 0.10 888.3 296.1 640 　URZ1J471MHD 10× 12.5 0.08 141 47 165 　URZ2A470MPD 47 100 （2A） 0.20 Rated Ripple （mArms） at 20℃ after at 20℃ after （105℃/120Hz） 1 minute 2 minutes 18× 15 4700 50 （1H） 12.5× 12.5 Leakage Current （µA） 2200 470 35 （1V） tan δ 3300 6800 25 （1E） Case Size φD×L（mm） 415.8 100 12.5×15 0.08 300 100 265 　URZ2A101MHD 220 16× 15 0.08 660 220 440 　URZ2A221MHD 330 18 ×15 0.08 990 330 540 　URZ2A331MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100N