URZ2A221MHD1TN

ALUMINUM ELECTROLYTIC CAPACITORS URZ Compact & Low-Profile Sized, Wide Temperature Range Wide temperature range and same size as URS. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). (Through 100V only) URZ High Temperature URS Specifications Item Performance Characteristics Category Temperature Range –55 to +105˚C (6.3 to 100V) , –40 to +105˚C (160 to 400V) Rated Voltage Range 6.3 to 400V Rated Capacitance Range 10 to 10000µF Capacitance Tolerance ± 20% at 120Hz, 20˚C Rated voltage (V) Leakage Current 6.3 to 100 After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.03CV. After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV. 160 to 400 After 1 minute's application of rated voltage at 20°C, I = 0.04CV+100 (µA) or less For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Rated voltage (V) tan δ (MAX.) Tangent of loss angle (tan δ) 6.3 0.28 10 0.24 16 0.20 25 0.16 35 0.14 Measurement frequency : 120Hz at 20˚C 50 0.12 63 0.10 100 0.08 160 0.20 200 0.20 250 0.20 400 0.25 Measurement frequency : 120Hz Rated voltage (V) Z– 25˚C / Z+20˚C Impedance ratio (MAX.) Z– 40˚C / Z+20˚C Stability at Low Temperature 6.3 5 10 10 4 8 35 2 3 25 2 4 16 3 6 50 2 3 63 2 3 100 2 3 160 3 4 200 3 4 250 3 6 400 6 10 Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 105°C. Shelf Life After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on black sleeve. Radial Lead Type Type numbering system (Example : 10V 1000µF) 1 φd Sleeve (P.E.T.) 2 3 4 5 6 7 8 9 10 11 UR Z 1 A 1 0 2 MPD 12 Size code Capacitance tolerance (±20%) P ±0.5 φD+0.5 MAX Configuration Rated capacitance (1000µF) Rated voltage (10V) Series name Pressure relief vent L+ 15MIN MAX Type 4MIN Configuration (mm) (φD < 20) 1.5 (φD 20) 2.0 φD 10 12.5 16 18 20 φD P 5.0 5.0 7.5 7.5 10.0 φd 0.6 0.6 0.8 0.8 1.0 10 12.5 to 18 20 Pb-free leadwire Pb-free PET sleeve PD HD RD Please refer to the Guidelines for Aluminum Electrolytic Capacitors for end seal configuration information. Frequency coefficient of rated ripple current V 6.3 to 100 160 to 400 Cap.(µF) Frequency 47 100 to 470 1000 to 10000 010 to 220 50Hz 0.75 0.80 0.85 0.80 120Hz 1.00 1.00 1.00 1.00 300Hz 1.35 1.23 1.10 1.25 1 kHz 1.57 1.34 1.13 1.40 10kHz or more 2.00 1.50 1.15 1.60 Dimension table in next page. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS URZ ■ Dimensions Rated Voltage （V） （code） 6.3 （0J） Rated Capacitance （µF） 2200 12.5× 15 0.30 415.8 138.6 3300 16× 15 0.32 623.7 4700 16× 15 0.34 888.3 6800 18× 15 0.38 1285.2 18× 20 0.46 10× 12.5 0.24 1000 16 （1C） 35 （1V） 50 （1H） 63 （1J） 160 （2C） 635 URZ0J222MHD 207.9 860 URZ0J332MHD 296.1 1010 URZ0J472MHD 428.4 1200 URZ0J682MHD 1890 630 1450 URZ0J103MHD 300 100 450 URZ1A102MPD 12.5× 15 0.26 660 220 690 URZ1A222MHD 3300 16× 15 0.28 990 330 940 URZ1A332MHD 4700 18× 15 0.30 1410 470 1120 URZ1A472MHD 6800 18× 20 0.34 2040 680 1330 URZ1A682MHD 10000 18× 25 0.42 3000 1000 1700 URZ1A103MHD 1000 12.5× 12.5 0.20 480 160 520 URZ1C102MHD 2200 16×15 0.22 1056 352 830 URZ1C222MHD 3300 18×15 0.24 1584 528 1050 URZ1C332MHD 4700 18×20 0.26 2256 752 1260 URZ1C472MHD 6800 18×25 0.30 3264 1088 1560 URZ1C682MHD 0.16 352.5 117.5 370 URZ1E471MPD 1000 12.5× 15 0.16 750 250 590 URZ1E102MHD 2200 18× 15 0.18 1650 550 970 URZ1E222MHD 3300 18× 20 0.20 2475 825 1220 URZ1E332MHD 4700 18× 25 0.22 3525 1175 1470 URZ1E472MHD 330 10×12.5 0.14 115.5 340 URZ1V331MPD 10× 12.5 346.5 470 12.5× 12.5 0.14 1000 16× 15 0.14 1050 2200 18× 20 0.16 3300 20× 25 0.18 220 10× 12.5 0.12 330 12.5× 12.5 0.12 470 16× 15 0.12 1000 18× 20 0.12 1500 2200 20× 25 0.14 3300 220 12.5× 12.5 0.10 330 12.5× 15 0.10 470 16× 15 0.10 10× 12.5 0.08 141 47 100 （2A） Part Number 2200 470 25 （1E） Rated Ripple （mArms） at 20℃ after at 20℃ after （105℃/120Hz） 1 minute 2 minutes tan δ 10000 10 （1A） Leakage Current （µA） Case Size φD×L（mm） 493.5 164.5 420 URZ1V471MHD 350 720 URZ1V102MHD 2310 770 1110 URZ1V222MHD 3465 1155 1430 URZ1V332MRD 330 110 290 URZ1H221MPD 495 165 370 URZ1H331MHD 705 235 540 URZ1H471MHD 500 830 URZ1H102MHD 1100 1250 URZ1H222MRD 138.6 335 URZ1J221MHD 623.7 207.9 510 URZ1J331MHD 888.3 296.1 640 URZ1J471MHD 47 165 URZ2A470MPD 415.8 100 12.5× 15 0.08 300 100 265 URZ2A101MHD 220 16× 15 0.08 660 220 440 URZ2A221MHD 330 18× 15 0.08 990 330 540 URZ2A331MHD 47 16× 15 0.20 400.8 － 300 URZ2C470MHD 68 18×15 0.20 535.2 － 350 URZ2C680MHD 68 16× 20 0.20 535.2 － 350 URZ2C680MHD6 For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS URZ ■ Dimensions Rated Voltage （V） （code） 160 （2C） 200 （2D） 250 （2E） 400 （2G） Rated Capacitance （µF） Case Size φD×L（mm） tan δ Leakage Current （µA） Rated Ripple （mArms） at 20℃ after at 20℃ after （105℃/120Hz） 1 minute 2 minutes Part Number 100 18 ×20 0.20 740 － 420 URZ2C101MHD 100 20 ×15 0.20 740 － 420 URZ2C101MRD6 150 18 ×25 0.20 1060 － 510 URZ2C151MHD 150 20 ×20 0.20 1060 － 510 URZ2C151MRD6 220 20 ×25 0.20 1508 － 550 URZ2C221MRD 33 16 ×15 0.20 364 － 250 URZ2D330MHD 47 18×15 0.20 476 － 300 URZ2D470MHD 47 16 ×20 0.20 476 － 300 URZ2D470MHD6 68 18 ×20 0.20 644 － 350 URZ2D680MHD 68 20 ×15 0.20 644 － 350 URZ2D680MRD6 100 18× 25 0.20 900 － 420 URZ2D101MHD 100 20× 20 0.20 900 － 420 URZ2D101MRD6 150 18× 25 0.20 1300 － 510 URZ2D151MHD 22 16 ×15 0.20 320 － 200 URZ2E220MHD 33 18× 15 0.20 430 － 250 URZ2E330MHD 33 16× 20 0.20 430 － 250 URZ2E330MHD6 47 18× 20 0.20 570 － 300 URZ2E470MHD 47 20× 15 0.20 570 － 300 URZ2E470MRD6 68 18×20 0.20 780 － 350 URZ2E680MHD 100 18× 25 0.20 1100 － 420 URZ2E101MHD 10 16× 15 0.25 260 － 100 URZ2G100MHD 22 18×15 0.25 452 － 200 URZ2G220MHD 22 16 ×20 0.25 452 － 200 URZ2G220MHD6 33 18 ×20 0.25 628 － 250 URZ2G330MHD 47 18 ×25 0.25 852 － 300 URZ2G470MHD 47 20× 20 0.25 852 － 300 URZ2G470MRD6 68 20× 25 0.25 1188 － 350 URZ2G680MRD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100K