URZ2C221MRD

ALUMINUM ELECTROLYTIC CAPACITORS URZ Compact & Low-Profile Sized, Wide Temperature Range Wide temperature range and same size as URS. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). URZ Valued marked with an ※ in the dimension table are scheduled to be discontinued and are not recommended for new designs. High Temperature URS Specifications Item Performance Characteristics Category Temperature Range –55 to +105˚C (6.3 to 100V) , –40 to +105˚C (160 to 400V) Rated Voltage Range 6.3 to 400V Rated Capacitance Range 10 to 10000µF Capacitance Tolerance ± 20% at 120Hz, 20˚C Rated voltage (V) Leakage Current ※ 6.3 to 100 After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.03CV(µA). After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV(µA). 160 to 400 After 1 minute's application of rated voltage at 20°C, I = 0.04CV+100 (µA) or less For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Rated voltage (V) tan δ (max.) Tangent of loss angle (tan δ) 6.3 0.28 10 0.24 16 0.20 25 0.16 35 0.14 Measurement frequency : 120Hz at 20˚C 50 0.12 63 0.10 100 0.08 160 0.20 200 0.20 250 0.20 400 0.25 Measurement frequency : 120Hz Rated voltage (V) Z(–25˚C) / Z(+20˚C) Impedance ratio (max.) Z(–40˚C) / Z(+20˚C) Stability at Low Temperature 6.3 5 10 10 4 8 35 2 3 25 2 4 16 3 6 50 2 3 63 2 3 100 2 3 160 3 4 200 3 4 250 3 6 400 6 10 Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 105°C. Shelf Life After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on black sleeve. ※ I : Leakage Current (µA), C : Rated Capacitance (µF), V : Rated Voltage (V) Radial Lead Type Type numbering system (Example : 16V 1000µF) 1 φd Sleeve (PET) 2 3 4 5 6 7 8 9 10 11 UR Z 1 C 1 0 2 MHD 12 Size code Capacitance tolerance (±20%) P±0.5 φD+ 0.5max. Configuration Rated capacitance (1000µF) Rated voltage (16V) Series name Pressure relief vent 15min. L ±1.5 Type 4min. Configuration (mm) φD 10 12.5 16 18 φD P 5.0 5.0 7.5 7.5 φd 0.6 0.6 0.8 0.8 10 12.5 to 18 Pb-free leadwire Pb-free PET sleeve PD HD Please refer to the Guidelines for Aluminum Electrolytic Capacitors for end seal configuration information. Frequency coefficient of rated ripple current V 6.3 to 100 160 to 400 Cap.(µF) Frequency 47 100 to 470 1000 to 10000 010 to 150 50Hz 0.75 0.80 0.85 0.80 120Hz 1.00 1.00 1.00 1.00 300Hz 1.35 1.23 1.10 1.25 1 kHz 1.57 1.34 1.13 1.40 10kHz or more 2.00 1.50 1.15 1.60 Dimension table in next page. CAT.8100M ALUMINUM ELECTROLYTIC CAPACITORS URZ ■ Dimensions Rated Voltage （V） （code） 6.3 （0J） Rated Capacitance （µF） 2200 12.5 × 15 0.30 415.8 138.6 3300 16 × 15 0.32 623.7 4700 16 × 15 0.34 888.3 6800 18 × 15 0.38 1285.2 18 × 20 0.46 10 × 12.5 0.24 1000 16 （1C） 35 （1V） 50 （1H） 63 （1J） 160 （2C） 635 ※URZ0J222MHD 207.9 860 ※URZ0J332MHD 296.1 1010 ※URZ0J472MHD 428.4 1200 ※URZ0J682MHD 1890 630 1450 ※URZ0J103MHD 300 100 450 ※URZ1A102MPD 2200 12.5 × 15 0.26 660 220 690 ※URZ1A222MHD 16 × 15 0.28 990 330 940 ※URZ1A332MHD 4700 18 × 15 0.30 1410 470 1120 ※URZ1A472MHD 6800 18 × 20 0.34 2040 680 1330 ※URZ1A682MHD 10000 18 × 25 0.42 3000 1000 1700 ※URZ1A103MHD 1000 12.5 × 12.5 0.20 480 160 520 　URZ1C102MHD 2200 16 × 15 0.22 1056 352 830 　URZ1C222MHD 3300 18 × 15 0.24 1584 528 1050 　URZ1C332MHD 4700 18 × 20 0.26 2256 752 1260 　URZ1C472MHD 6800 18 × 25 0.30 3264 1088 1560 　URZ1C682MHD 0.16 352.5 117.5 370 　URZ1E471MPD 1000 12.5 × 15 0.16 750 250 590 　URZ1E102MHD 2200 18 × 15 0.18 1650 550 970 　URZ1E222MHD 3300 18 × 20 0.20 2475 825 1220 　URZ1E332MHD 4700 18 × 25 0.22 3525 1175 1470 　URZ1E472MHD 330 10 × 12.5 0.14 115.5 340 　URZ1V331MPD 10 × 12.5 346.5 470 12.5 × 12.5 0.14 164.5 420 　URZ1V471MHD 1000 16 × 15 0.14 1050 350 720 　URZ1V102MHD 2200 493.5 18 × 20 0.16 2310 770 1110 　URZ1V222MHD 220 10 × 12.5 0.12 330 110 290 　URZ1H221MPD 330 12.5 × 12.5 0.12 495 165 370 　URZ1H331MHD 470 16 × 15 0.12 705 235 540 　URZ1H471MHD 1000 18 × 20 0.12 1500 500 830 　URZ1H102MHD 220 12.5 × 12.5 0.10 415.8 138.6 335 　URZ1J221MHD 330 12.5 × 15 0.10 623.7 207.9 510 　URZ1J331MHD 470 16 × 15 0.10 888.3 296.1 640 　URZ1J471MHD 47 100 （2A） Part Number 3300 470 25 （1E） Rated Ripple （mArms） at 20℃ after at 20℃ after （105℃/120Hz） 1 minute 2 minutes tan δ 10000 10 （1A） Leakage Current （µA） Case Size φD×L（mm） 0.08 141 47 165 　URZ2A470MPD 100 12.5 × 15 10 × 12.5 0.08 300 100 265 　URZ2A101MHD 220 16 × 15 0.08 660 220 440 　URZ2A221MHD 330 18 × 15 0.08 990 330 540 　URZ2A331MHD 47 16 × 15 0.20 400.8 － 300 ※URZ2C470MHD 68 18 × 15 0.20 535.2 － 350 ※URZ2C680MHD 68 16 × 20 0.20 535.2 － 350 ※URZ2C680MHD6 For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100M ALUMINUM ELECTROLYTIC CAPACITORS URZ ■ Dimensions Leakage Current （µA） Rated Ripple （mArms） at 20℃ after at 20℃ after （105℃/120Hz） 1 minute 2 minutes Rated Voltage （V） （code） Rated Capacitance （µF） 160 （2C） 100 18 × 20 0.20 740 － 420 ※URZ2C101MHD 150 18 × 25 0.20 1060 － 510 ※URZ2C151MHD 33 16 × 15 0.20 364 － 250 ※URZ2D330MHD 47 18 × 15 0.20 476 － 300 ※URZ2D470MHD 47 16 × 20 0.20 476 － 300 ※URZ2D470MHD6 200 （2D） 250 （2E） 400 （2G） Case Size φD×L（mm） tan δ Part Number 68 18 × 20 0.20 644 － 350 ※URZ2D680MHD 100 18 × 25 0.20 900 － 420 ※URZ2D101MHD 150 18 × 25 0.20 1300 － 510 ※URZ2D151MHD 22 16 × 15 0.20 320 － 200 ※URZ2E220MHD 33 18 × 15 0.20 430 － 250 ※URZ2E330MHD 33 16 × 20 0.20 430 － 250 ※URZ2E330MHD6 47 18 × 20 0.20 570 － 300 ※URZ2E470MHD 68 18 × 20 0.20 780 － 350 ※URZ2E680MHD 100 18 × 25 0.20 1100 － 420 ※URZ2E101MHD 10 16 × 15 0.25 260 － 100 ※URZ2G100MHD 22 18 × 15 0.25 452 － 200 ※URZ2G220MHD 22 16 × 20 0.25 452 － 200 ※URZ2G220MHD6 33 18 × 20 0.25 628 － 250 ※URZ2G330MHD 47 18 × 25 0.25 852 － 300 ※URZ2G470MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100M