USA0J101MDD

ALUMINUM ELECTROLYTIC CAPACITORS USA 7mmL, For General Purposes Standard miniature series with 7mm height. USR 7mmL, High CV Smaller (USR) Higher CV series with 7mm height. UST Compliant to the RoHS directive (2011/65/EU). High Temperature USA USP Bi-polarized Smaller USR Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current USA USR – 40 to +85˚C – 40 to +85˚C 6.3 to 50V 4 to 50V 1 to 220µF 1 to 470µF ± 20% at 120Hz, 20˚C After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV or 3 (μA), whichever is greater. Measurement frequency : 120Hz at 20˚C Tangent of loss angle (tan δ) Rated voltage (V) tan δ (MAX.) Stability at Low Temperature Rated voltage (V) Impedance ratio Z– 25˚C / Z+20˚C ZT / Z20 (MAX.) Z– 40˚C / Z+20˚C 4 0.35 6.3 0.24 10 0.20 16 0.16 25 0.14 35 0.12 50 0.10 Measurement frequency : 120Hz 4 6 12 6.3 4 8 The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 85°C. Endurance 10 3 6 16 2 4 35 2 3 50 2 3 Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current After storing the capacitors under no load at 85˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Printed with white color letter on black sleeve. Shelf Life Marking Type numbering system (Example : USA : 10V 33µF) Radial Lead Type 1 Sleeve (P.E.T.) 2 3 4 5 6 7 8 9 10 11 U S A 11 A2 33 3 4 0 5M 6D 7D φd Sleeve (P.E.T.) 8 9 10 11 US A 1 A 3 3 0 M DD Configuration Capacitance tolerance (±20%) P±0.5 φD+0.5MAX P±0.5 φD+0.5MAX φd L+1MAX L+1MAX 15MIN 15MIN Capacitance tolerance (±2 Rated voltage (10V) (mm) 4MIN 4MIN φD P φd 4 5 6.3 1.5 2.0 2.5 φD 0.45 4 0.45 5 0.45 P φd 8 3.5 6.3 0.5 1.5 2.0 2.5 0.45 0.45 0.45 Rated capacitance (3 Series name (mm) Type 8 3.5 0.5 Configuration φD 4 to 8 Configuration DD Dimensions Type･S Code eries 1 010 2.2 2R2 3.3 3R3 4.7 4R7 10 100 22 220 33 330 47 470 100 101 220 221 330 331 470 471 4 (0G) USR 6.3 (0J) USA USR 10 (1A) USA USR 16 (1C) USA USR Pb-free leadwire Pb-free PET sleeve DD 25 (1E) USA USR 35 (1V) USA USR ­ 4×7 33 4×7 39 5×7 65 6.3 × 7 110 8×7 165 8×7 240 4×7 34 5×7 42 5×7 50 6.3 × 7 77 8×7 130 4×7 34 4×7 40 4×7 48 5×7 78 6.3 × 7 120 8×7 180 5×7 38 5×7 47 6.3 × 7 59 8×7 96 4×7 35 4×7 43 5×7 59 6.3 × 7 87 8×7 145 4×7 28 5×7 44 6.3 × 7 57 6.3 × 7 68 8×7 107 4×7 28 4×7 39 5×7 55 5×7 65 6.3 × 7 98 8×7 150 5×7 33 6.3 × 7 51 6.3 × 7 63 8×7 78 4×7 28 5×7 48 5×7 58 6.3 × 7 71 8×7 115 4×7 24 5×7 36 6.3 × 7 57 8×7 72 4×7 24 4×7 31 5×7 52 6.3 × 7 65 8×7 85 50 (1H) USA USR 4×7 10 4×7 19 4×7 24 5×7 29 6.3 × 7 44 8×7 65 4×7 10 4×7 19 4×7 24 4×7 28 5×7 38 6.3 × 7 58 8×7 75 Case size φ D × L (mm) Rated ripple Rated ripple current (mArms) at 85˚C 120Hz Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. 10 kHz or more 1.50 175 Rated voltage (1 Series n T Pb-free leadwire Pb-free PET sleeve 4 to 8 V(Code) Configuratio Rated capacitance (33µF) φD Cap.(µF) 25 2 4 CAT.8100H