USF1A330MDD

ALUMINUM ELECTROLYTIC CAPACITORS USF 7mmL, Low Impedance Low impedance over wide temperature range of – 55 to +105˚C, with 7mm height. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). USF Low Impedance UST Specifications Item Performance Characteristics Category Temperature Range –55 to +105˚C Rated Voltage Range 6.3 to 35V Rated Capacitance Range 6.8 to 220µF Capacitance Tolerance ± 20% at 120Hz, 20˚C Leakage Current After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV or 3( A), whichever is greater. Measurement frequency : 120Hz, Temperature : 20˚C Tangent of loss angle (tan ) Rated voltage (V) tan (MAX.) 6.3 0.18 10 0.16 16 0.14 25 0.12 35 0.12 Measurement frequency : 120Hz Stability at Low Temperature Rated voltage (V) Z– 25˚C / Z+20˚C Impedance ratio Z– 55˚C / Z+20˚C (MAX.) 6.3 2 3 The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 105°C. Endurance 35 2 3 25 2 3 16 2 3 10 2 3 Capacitance change tan Leakage current Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Printed with white color letter on dark brown sleeve. Shelf Life Marking Type numbering system (Example : 10V 33µF) Radial Lead Type 1 2 3 4 5 6 7 8 9 10 11 U S F 1 A 3 3 0 M DD Sleeve (P.E.T.) d Configuration Rated capacitance (33µF) P±0.5 D+0.5MAX Capacitance tolerance (±20%) Rated voltage (10V) Series name L+1MAX 15MIN (mm) 4MIN D P d 4 1.5 0.45 5 2.0 0.45 6.3 2.5 0.45 8 3.5 0.5 Type Configuration D 4 to 8 Pb-free leadwire Pb-free PET sleeve DD Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.35 120 Hz 0.50 300 Hz 0.64 1 kHz 0.83 10 kHz or more 1.00 Dimension table in next page. CAT.8100J ALUMINUM ELECTROLYTIC CAPACITORS USF ■ Dimensions 2 2 33 7 .3 7 . 3 .7 33 3 .7 7 7 . .3 7 . .2 . .3 7 . .3 . 7 . . . 2 7 . 3. . 2 3.3 22 22 22 7 . 3 33 7 . 3.3 .7 33 .3 7 . .7 . 7 .3 7 . . . 7 . 7 22 2 P . 2 7 . 2 . 2 22 7 . 7 . 3 7 . 3. 2 .7 22 3.3 7 33 .3 7 . .2 . 33 7 .3 7 . 7. 2 . 7 7 . . . 2 7 . . 2 7 . 2 3 22 33 .3 7 . 3 .3 22 33 .3 3.3 7 7 . 2 3.7 .7 7 . 2 . .7 22 7 . 2 .2 . 33 7 . 2 .7 7 . 2 . 2 7 . 2 7 . 2 3 3.3 7 . 2 3. .7 7 . 2 .2 . 7 . 2 7.7 . 7 . 2 . . 7 7 22 2 33 For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. Please refer to page 18, 19 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. CAT.8100J