USP1C100MDD

ALUMINUM ELECTROLYTIC CAPACITORS USP 7mmL, Bi-Polarized Bi-polarized series with 7mm height. Extended capacitance range by an addition of φ8 product. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). USP USA Bi-polarized Specifications Item Performance Characteristics Category Temperature Range –40 to 85˚C Rated Voltage Range 6.3 to 50V Rated Capacitance Range 0.1 to 220µF Capacitance Tolerance ± 20% at 120Hz, 20˚C Leakage Current After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.05CV or 10 (µA), whichever is greater. Measurement frequency : 120Hz at 20˚C Tangent of loss angle (tan δ) Rated voltage (V) tan δ (MAX.) 6.3 0.24 10 0.20 16 0.16 25 0.16 35 0.14 50 0.12 Measurement frequency : 120 Hz Stability at Low Temperature The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 85°C with the polarity inverted every 250 hours. Endurance 50 2 3 35 2 3 25 2 4 16 2 4 10 3 6 6.3 4 8 Rated voltage (V) Z– 25˚C / Z 20˚C Impedance ratio Z– 40˚C / Z 20˚C (MAX.) Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current After storing the capacitors under no load at 85˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Printed with white color letter on black sleeve. Shelf Life Marking Type numbering system (Example : 10V 33µF) Radial Lead Type 1 Sleeve (P.E.T.) Sleeve (P.E.T.) 2 3 4 5 6 7 8 9 10 11 10 D 11 D U2 S3 P4 15 A6 37 38 09 M US P 1 A 3 3 0 M DD 1 φd φd L+1MAX L+1MAX 15MIN 15MIN Capacitance (±20%) Ratedtolerance capacitance (33µF) Rated capacitance (33µF) Rated voltage (10V) (mm) 4MIN φD 4MIN P±0.5 P±0.5 φD+0.5MAX φD+0.5MAX Configuration Configuration Capacitance tolerance (±20%) 4 5 Rated voltage (10V) Series name 6.3 (mm)8 φD P 4 1.5 5 2.06.3 2.5 8 3.5 P φd 1.50.452.00.452.50.453.5 0.5 φd 0.45 0.45 0.45 0.5 Series name Type Type Configuration Configuration φD φ D4 to 8 4 to 8 Pb-free leadwire Pb-free PET sleeve Pb-free leadwire Pb-free PET DD sleeve DD Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 10 kHz or more 1.50 Dimension table in next page. CAT.8100J ALUMINUM ELECTROLYTIC CAPACITORS USP ■ Dimensions δ φ 33 .2 .3 .3 1 1 .3 33 1 . P 31. P 1 1 P 221 .2 1 22 .2 11 .3 1 2 P1 1 P1 22 .3 .2 1 . P1 33 .3 .2 23. P1 .2 . 1 1 1 P .2 .2 33 2 P .2 1 1 11 P1 1 1 .1 1 1 P1 .1 1 3 P1 1 22 .3 .1 1 . 1 P1 22 33 .3 .1 2 . 3 P1 33 .3 .1 3 . 1 .1 . .1 12 P1 1 1 21 3 1 .3 .1 12. .3 .1 2 . .1 1.2 .1 P1 P1 1 3 P1 22 3 P1 33 . P1 3.3 .1 1 1 P1 3 3 . .1 1 22 P1 3 .1 1 . 22 1 .1 3 . 33 .1 1 P1 1 22 33 3 1 12 22 1 1 2 1 2 2 .3 P1 1 2 P1 22 . P1 33 .1 .12 1 1. P1 1 .22 .12 1 2.3 P1 22 33 .33 .12 1 3. P1 . .12 1 . P1 1 .12 1 1 P1 2.2 .12 1 1 P1 2 2 3.3 .12 1 2 P1 3 3 2 P1 .12 11. 1 . .3 .12 2 22 .12 1 P1 1 P1 22 For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. Please refer to page 18, 19 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. CAT.8100J