UST1C100MDD1TP

ALUMINUM ELECTROLYTIC CAPACITORS UST 7mmL, Wide Temperature Range Wide temperature range of – 55 to 105˚C, with 7mm height. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). UST High Temperature USA Specifications Item Performance Characteristics Category Temperature Range –55 to 105˚C Rated Voltage Range 6.3 to 50V Rated Capacitance Range 1 to 220µF Capacitance Tolerance ± 20% at 120Hz, 20˚C Leakage Current After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV or 3 (µA), whichever is greater. Measurement frequency : 120Hz at 20˚C Tangent of loss angle (tan δ) Rated voltage (V) tan δ (MAX.) 6.3 0.24 10 0.21 16 0.18 25 0.15 35 0.13 50 0.12 Measurement frequency : 120 Hz Stability at Low Temperature 6.3 3 6 Rated voltage (V) Z– 25˚C / Z 20˚C Impedance ratio Z– 40˚C / Z 20˚C (MAX.) The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 105°C. Endurance 10 2 5 16 2 4 50 2 3 35 2 3 25 2 3 25V) Within ±20% of the initial capacitance value (= 200% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Printed with white color letter on black sleeve. Shelf Life Marking Type numbering system (Example : 10V 33µF) Radial Lead Type φd Sleeve (P.E.T.) φd 1 2 3 4 5 6 7 8 9 10 Configuration P±0.5 P±0.5 L+1MAX 15MIN L+1MAX 15MIN 11 U D D 1 S 2 T 3 1 4 A 5 3 6 3 7 0 8 M 9 10 11 US T 1 A 3 3 0 M D D φD+0.5MAX φD+0.5MAX Sleeve (P.E.T.) Rated capacitance (33µF) Capacitance tolerance (±20%) voltage(33µF) (10V) RatedRated capacitance (mm) 4MIN 4MIN Capacitance tolerance (±20%) Configuration φD 4 5 6.3 P φD φd P 1.5 4 0.45 1.5 2.0 5 0.45 2.0 2.5 6.3 0.45 2.5 3.5 8 0.5 3.5 φd 0.45 0.45 0.45 0.5 8 Series (10V) name Rated voltage (mm) Type Series name Configuration Type Pb-free leadwire φD Configuration Pb-free PET sleeve Pb-free leadwire 4φtoD 8 DD Pb-free PET sleeve 4 to 8 DD Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 10 kHz or more 1.50 Dimension table in next page. CAT.8100J ALUMINUM ELECTROLYTIC CAPACITORS UST ■ Dimensions δ φ 22 .2 33 .3 .3 22 22 33 .3 2 2 2 3 .2 3 .2 3 .2 3 2 P 22 33 .3 .2 3. 3 22 .2 3 3 22 .2 3.3 .2 . 33 .2 22 22 33 .2 22 . 3 22 2 . 3. 2 22 .3 . .2 33 .3 . . 2 . . 2 3 22 .3 . . 33 .3 . .2 . . . 3 22 .3 33 33 22 3 . 3 3 2 . 3 3. 3 . 3 . . 3 . . 2 3 22 2 2.2 . 2 3 3.3 . 2 3 2 . . 2 3 2 .3 22 33 33 2 2 3 3 . 2 . 2 22 For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. Please refer to page 18, 19 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. CAT.8100J