UST1H3R3MDD

ALUMINUM ELECTROLYTIC CAPACITORS UST 7mmL, Wide Temperature Range Wide temperature range of – 55 to +105˚C, with 7mm height. Compliant to the RoHS directive (2011/65/EU). UST High Temperature USA Specifications Item Performance Characteristics Category Temperature Range –55 to +105˚C Rated Voltage Range 6.3 to 50V Rated Capacitance Range 1 to 220µF Capacitance Tolerance ± 20% at 120Hz, 20˚C Leakage Current After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV or 3 (µA), whichever is greater. Measurement frequency : 120Hz at 20˚C Tangent of loss angle (tan δ) Rated voltage (V) tan δ (MAX.) 6.3 0.24 10 0.21 16 0.18 25 0.15 35 0.13 50 0.12 Measurement frequency : 120 Hz Stability at Low Temperature 6.3 3 6 Rated voltage (V) Z– 25˚C / Z+20˚C Impedance ratio Z– 40˚C / Z+20˚C ZT / Z20 (MAX.) 10 2 5 Within ±25% of the initial capacitance value (16Vor less) Within ±20% of the initial capacitance value (25Vor more) 200% or less than the initial specified value Less than or equal to the initial specified value tan δ Leakage current After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Printed with white color letter on black sleeve. Shelf Life Marking Type numbering system (Example : 10V 33µF) Radial Lead Type φd Sleeve (P.E.T.) φd 1 2 3 4 5 6 7 8 9 10 11 U D D 1 S 2 T 3 1 4 A 5 3 6 3 7 0 8 M 9 10 11 US T 1 A 3 3 0 M D D Configuration P±0.5 P±0.5 φD+0.5MAX φD+0.5MAX Sleeve (P.E.T.) L+1MAX L+1MAX 15MIN Rated capacitance (33µF) Capacitance tolerance (±20%) voltage(33µF) (10V) RatedRated capacitance (mm) 4MIN 15MIN Capacitance tolerance (±20%) Configuration 4MIN φD 4 5 6.3 P φD φd P 1.5 4 0.45 1.5 2.0 5 0.45 2.0 2.5 6.3 0.45 2.5 3.5 8 0.5 3.5 φd 0.45 0.45 0.45 0.5 8 Series (10V) name Rated voltage (mm) Type Series name Configuration Pb-free PET sleeve 4 to 8 V Cap.(µF) Code 1 2.2 3.3 4.7 10 22 33 47 100 220 010 2R2 3R3 4R7 100 220 330 470 101 221 6.3 0J 4×7 5×7 5×7 6.3 × 7 8×7 10 1A 34 42 50 77 130 5×7 5×7 6.3 × 7 8×7   8×7 16 1C 38 47 59 96 140 4×7 5×7 6.3 × 7 6.3 × 7 8×7 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 DD 25 1E 29 44 57 68 107 5×7 6.3 × 7 6.3 × 7 8×7 35 1V 33 51 63 78 4×7 5×7 6.3 × 7 8×7 50 1H 24 36 57 72 4×7 4×7 4×7 5×7 6.3 × 7 8×7 Case size φ D × L (mm) 10 19 24 29 44 65 Rated ripple Rated ripple current (mArms) at 105˚C 120Hz Frequency coefficient of rated ripple current Frequency Coefficient Type Pb-free leadwire φD Configuration Pb-free PET sleeve Pb-free leadwire 4φtoD 8 DD Dimensions 50 2 3 35 2 3 25 2 3 Capacitance change The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 105°C. Endurance 16 2 4 Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. 10 kHz or more 1.50 175