USV0J470MFD

ALUMINUM ELECTROLYTIC CAPACITORS SV 7mmL, Long Life Assurance series Extended load life of 5000 hours at +105˚C, with 7mm height. Compliant to the RoHS directive (2011/65/EU). ST SV Long Life Specifications Item Performance Characteristics Category Temperature Range – 40 to +105˚C Rated Voltage Range 6.3 to 50V Rated Capacitance Range 0.1 to 220µF Capacitance Tolerance ± 20% at 120Hz, 20˚C Leakage Current After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA), whichever is greater. Measurement frequency : 120Hz, Temperature : 20˚C Tangent of loss angle (tan δ) Rated voltage ( V) tan δ (MAX.) 6.3 0.24 10 0.21 16 0.18 25 0.15 35 0.13 50 0.12 Measurement frequency : 120Hz Rated voltage ( V) Z– 25˚C / Z+20˚C Impedance ratio Z– 40˚C / Z+20˚C ZT / Z20 (MAX.) Stability at Low Temperature 6.3 4 8 10 3 6 25 2 3 35 2 3 50 2 3 Within ±30% of the initial capacitance value 300% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 5000 hours at 105°C. Endurance 16 2 4 After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Printed with silver color letter on dark brown sleeve. Shelf Life Marking Type numbering system (Example: 10V 33µF) Radial Lead Type 1 φd 2 3 4 5 6 7 8 9 10 11 US V 1 A 3 3 0 M F D Configuration P ±0.5 φD＋0.5 MAX. Sleeve (P.E.T.) Capacitance tolerance (±20%) Rated capacitance (33µF) L+ 1MAX. 15MIN 4MIN Rated voltage (10V) (mm) Series name φD 4 5 6.3 8 P 1.5 2.0 2.5 3.5 φd 0.45 0.45 0.45 0.5 Type Configuration φD Pb-free leadwire Pb-free PET sleeve 4 to 8 FD Dimensions V Cap.(µF) 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 Code 0R1 R22 R33 R47 010 2R2 3R3 4R7 100 220 330 470 101 221 6.3 0J 4×7 5×7 5×7 6.3 × 7 8×7 10 1A 34 42 50 77 130 5×7 5×7 6.3 × 7 8×7 16 1C 38 47 59 96 4×7 5×7 6.3 × 7 6.3 × 7 8×7 25 1E 29 44 57 68 107 5×7 6.3 × 7 6.3 × 7 8×7 35 1V 33 51 63 78 4×7 5×7 6.3 × 7 8×7 24 36 57 72 50 1H 4×7 4×7 4×7 4×7 4×7 4×7 4×7 5×7 6.3 × 7 8×7 Case size φ D × L (mm) 1.0 2.3 3.5 5.0 10 19 24 29 44 65 Rated ripple Rated ripple current (mArms) at 105˚C 120Hz Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 10 kHz or more 1.50 Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. CAT.8100C