USV1A470MFD

ALUMINUM ELECTROLYTIC CAPACITORS USV 7mmL, Long Life Assurance Extended load life of 5000 hours at 105˚C, with 7mm height. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). UST Long Life USV Specifications Item Performance Characteristics Category Temperature Range –40 to 105˚C Rated Voltage Range 6.3 to 50V Rated Capacitance Range 1 to 220µF Capacitance Tolerance ± 20% at 120Hz, 20˚C Leakage Current After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV or 3(μA), whichever is greater. Measurement frequency : 120Hz, Temperature : 20˚C Tangent of loss angle (tan δ) Rated voltage (V) tan δ (MAX.) Stability at Low Temperature Rated voltage (V) Z– 25˚C / Z 20˚C Impedance ratio Z– 40˚C / Z 20˚C (MAX.) 6.3 0.24 10 0.21 16 0.18 25 0.15 35 0.13 50 0.12 Measurement frequency : 120Hz 6.3 4 8 50 2 3 Within ±30% of the initial capacitance value 300% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 5000 hours at 105°C. Endurance 35 2 3 25 2 3 16 2 4 10 3 6 After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Printed with silver color letter on dark brown sleeve. Shelf Life Marking Type numbering system (Example: 10V 33µF) Radial Lead Type φd Sleeve (P.E.T.) φd 1 2 3 4 5 6 7 8 9 10 11 9 10 11 U1 S2 V3 14 A5 36 37 08 M F D US V 1 A 3 3 0 M F D D P±0.5P±0.5 0.5 MAX. 0.5 D MAX. Sleeve (P.E.T.) L+ 1MAX. L+ 1MAX. 15MIN 4MIN 15MIN 4MIN Configuration Configuration Capacitance tolerance (±20%) Capacitance tolerance (±20%) Rated capacitance (33µF) RatedRated capacitance voltage(33µF) (10V) (mm) φD 4 5 6.3 φD 4 2.0 5 2.5 6.3 P 1.5 P 0.45 1.5 0.45 2.0 0.45 2.5 φd φd 0.45 0.45 0.45 (mm) 8 8 3.5 3.5 0.5 0.5 Rated voltage (10V) Series name Series name Type Type Configuration Pb-free leadwire Configuration φD Pb-free PET sleeve 4φtoD8 4 to 8 Pb-free leadwire FD sleeve Pb-free PET FD Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 10 kHz or more 1.50 Dimension table in next page. CAT.8100J ALUMINUM ELECTROLYTIC CAPACITORS USV ■ Dimensions δ φ 22 33 .3 .2 3 5 .2 3 .2 3 .3 33 5 5 22 22 2 2 .2 2 3 2 P 22 33 5 .3 .2 3. 3 22 .2 3 3 22 5 .2 3.3 .3 .2 . 5 33 5 .2 22 33 . 3 . 3.52 .3 . 5.2 .3 . 5 2 22 5 33 .52 . 25 5 . 5 3 33 22 .3 . 5 5.5 5 33 .3 . 35 22 3 3 5 . 3 3.5 3 .3 . 3 . 5 . 3 .55 2.2 3.3 . .25 . 5 . 3 33 5 . 5 . 5 . 2 3 . 2 3 2 22 33 2 2 . 2 3 2 . 2 3 2 .3 . 2 5 . 2 33 2 5 22 22 5 3 3 22 For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. Please refer to page 18, 19 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. CAT.8100J