USW0J220MDD

ALUMINUM ELECTROLYTIC CAPACITORS USW 7mmL, For Audio Equipment Acoustic series, with 7mm height. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). USW Smaller UMW Specifications Performance Characteristics Item Category Temperature Range –40 to +85˚C Rated Voltage Range 6.3 to 50V Rated Capacitance Range 1 to 220µF Capacitance Tolerance ±20% at 120Hz, 20˚C Leakage Current After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV or 3 (µA) , whichever is greater. Measurement frequency : 120Hz at 20°C 6.3 0.24 10 0.20 Tangent of loss angle (tan δ) Rated voltage (V) tan δ (MAX.) Stability at Low Temperature Rated voltage (V) Impedance ratio Z– 25˚C / Z + 20˚C 16 0.16 25 0.14 35 0.12 50 0.10 Measurement frequency : 120Hz (MAX.) 6.3 4 8 Z– 40˚C / Z + 20˚C The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 85°C. Endurance 10 3 6 16 2 4 25 2 4 35 2 3 50 2 3 Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Printed with black color letter on gold sleeve. Shelf Life Marking Type numbering system (Example : 10V 33µF) Radial Lead Type 1 Sleeve (P.E.T.) 2 3 4 5 6 7 8 9 10 11 U SW 1 A 3 3 0 M DD φd P ±0.5 φD+0.5 MAX. Configuration Capacitance tolerance (±20%) Rated capacitance (33µF) Rated voltage (10V) L+1MAX. 15MIN Series name 4MIN (mm) φD 4 5 6.3 P 1.5 2.0 2.5 φd 0.45 0.45 0.45 Type Configuration φD 4 to 6.3 Pb-free leadwire Pb-free PET sleeve DD Frequency coefficient of rated ripple current Frequency 50Hz 120Hz 300Hz 1kHz 10kHz or more Coefficient 0.70 1.00 1.17 1.36 1.50 Dimension table in next page. CAT.8100J ALUMINUM ELECTROLYTIC CAPACITORS USW Dimensions Rated Voltage （V） （code） Rated Capacitance （µF） 22 6.3 (0J) 10 (1A) 16 (1C) 25 (1E) 50 (1H) 4× 7 tan δ 0.24 Leakage Current （µA） at 20℃ after 2 minutes （ ） Rated Ripple （mArms） （85℃/120Hz） Part Number 34 USW0J220MDD 3 33 4×7 0.24 3 40 USW0J330MDD 47 4×7 0.24 3 48 USW0J470MDD 100 5× 7 0.24 6.3 78 USW0J101MDD 220 6.3× 7 0.24 13.86 120 USW0J221MDD 22 4× 7 0.20 35 USW1A220MDD 3 33 4× 7 0.20 3.3 43 USW1A330MDD 47 5× 7 0.20 4.7 59 USW1A470MDD 100 6.3×7 0.20 87 USW1A101MDD 10 10 4×7 0.16 3 28 USW1C100MDD 22 4× 7 0.16 3.52 39 USW1C220MDD 33 5×7 0.16 5.28 55 USW1C330MDD 47 5×7 0.16 100 6.3× 7 0.16 7.52 16 65 USW1C470MDD 98 USW1C101MDD 10 4×7 0.14 3 28 USW1E100MDD 22 5×7 0.14 5.5 48 USW1E220MDD 33 5×7 0.14 8.25 58 USW1E330MDD 47 6.3×7 0.14 11.75 71 USW1E470MDD 4×7 0.12 24 USW1V4R7MDD 4.7 35 (1V) Case Size φD×L（mm） 3 10 4× 7 0.12 3.5 31 USW1V100MDD 22 5× 7 0.12 7.7 52 USW1V220MDD 33 6.3× 7 0.12 11.55 65 USW1V330MDD 1 4×7 0.10 3 10 USW1H010MDD 2.2 4× 7 0.10 3 19 USW1H2R2MDD 3.3 4×7 0.10 3 24 USW1H3R3MDD 4×7 0.10 3 28 USW1H4R7MDD 10 4.7 5×7 0.10 5 38 USW1H100MDD 22 6.3×7 0.10 11 58 USW1H220MDD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. Please refer to page 18, 19 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. CAT.8100J