USW1V470MDD

ALUMINUM ELECTROLYTIC CAPACITORS SW 7mmL, For Audio Equipment series Acoustic series, with 7mm height. Adapted to the RoHS directive (2002/95/EC). SW Smaller MW Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current tan δ Performance Characteristics – 40 ~ +85˚C 6.3 ~ 50V 0.1 ~ 220µF ±20% at 120Hz, 20˚C After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA) , whichever is greater. Measurement frequency : 120Hz, Temperature : 20°C Rated voltage (V) tan δ ( MAX.) 6.3 0.24 10 0.20 6.3 4 8 16 0.16 10 3 6 16 2 4 25 0.14 25 2 4 35 0.12 35 2 3 50 0.10 50 2 3 Measurement frequency : 120Hz Stability at Low Temperature Rated voltage (V) Impedance ratio Z– 25˚C / Z + 20˚C ZT / Z20 (MAX.) Z– 40˚C / Z + 20˚C Endurance After 1000 hours' application of rated voltage at 85°C, capacitors meet the characteristic requirements listed at right. Capacitance change tan δ Leakage current Within ±20% of initial value 200% or less of initial specified value Initial specified value or less Shelf Life Marking After storing the capacitors under no load at 85°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. Printed with black color letter on gold sleeve. Radial Lead Type Sleeve (P.E.T.) D+0.5MAX. B Type numbering system (Example : 10V 33µF) d U SW 1 A 3 3 0 M DD P ± 0.5 1 2 3 4 5 6 7 8 9 10 11 Configuration Capacitance tolerance (±20%) Rated Capacitance (33µF) Rated voltage (10V) Series name Type B L+1MAX. 15MIN 4MIN B D 4 5 6.3 P 1.5 2.0 2.5 B d 0.45 0.45 0.45 (mm) Configuration Pb-free leadwire BD Pb-free PET sleeve 4 ~ 6.3 DD 16 1C 25 1E 35 1V Dimensions V Cap.(µF) Code 6.3 0J 10 1A 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 0R1 R22 R33 R47 010 2R2 3R3 4R7 100 220 330 470 101 221 4× 7 4× 7 4× 7 5× 7 6.3 × 7 34 40 48 78 120 4× 7 4× 7 5× 7 6.3 × 7 35 43 59 87 4× 4× 5× 5× 6.3 × 7 7 7 7 7 28 39 55 65 98 4× 7 5× 7 5× 7 6.3 × 7 28 48 58 71 4× 4× 5× 6.3 × 7 7 7 7 24 31 52 65 50 1H 4× 7 4× 7 4× 7 4× 7 4× 7 4× 7 4× 7 4× 7 5× 7 6.3 × 7 1.0 2.3 3.5 5.0 10 19 24 29 38 58 Case size φ D × L (mm) Rated ripple Rated Ripple (mArms) at 85°C 120Hz Frequency coefficient of rated ripple current Frequency Coefficient 50Hz 0.70 120Hz 1.00 300Hz 1.17 1kHz 1.36 10kHz~ 1.50 Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. CAT.8100V