UTM1A331MHD

ALUMINUM ELECTROLYTIC CAPACITORS TM Timer Circuit Use series Ideally suited for timer circuits. Excellent leakage current stability, even subjected to load or no load at high temperature for a long time. Compliant to the RoHS directive (2002/95/EC). Products which are scheduled to be discontinued. Not recommended for new designs KL TM High Stability Specifications Item Performance Characteristics Category Temperature Range – 40 to +85°C Rated Voltage Range 10 to 50V Rated Capacitance Range 1 to 470µF Capacitance Tolerance ± 20% (M) (±10% (K) semi-standard) at 120Hz, 20°C Leakage Current After 2 minutes' application of rated voltage, leakage current is 0.001CV+1 (µA) or less. Measurement frequency : 120Hz at 20°C Tangent of loss angle (tan δ) 10 0.17 Rated voltage (V) tan δ (MAX.) 16 0.13 25 0.10 50 0.08 Measurement frequency : 120Hz Stability at Low Temperature 10 2 4 Rated voltage (V) Z– 25°C / Z+20°C Impedance ratio ZT / Z20 (MAX.) Z– 40°C / Z+20°C The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 85°C. Endurance 16 2 3 25 1.5 2 50 1.5 2 Within ±10% of the initial capacitance value 150% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current After storing the capacitors under no load at 85˚C for 1000 hours and then performing voltage treatment based on JIS C 51014 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Shelf Life Printed with white color letter on black sleeve. Marking Type numbering system (Example : 10V 33µF) Radial Lead Type φd Sleeve (P.E.T.) 1 2 3 4 5 6 7 8 9 10 11 P ± 0.5 φD+0.5 MAX. U TM 1 A 3 3 0 M PD Configuration Capacitance tolerance (M : ±20%, K : ±10%) (mm) φD 6.3 Pressure relief vent 15MIN 4MIN Rated capacitance (33µF) 10 12.5 16 2.5 3.5 5.0 5.0 7.5 Rated voltage (10V) φd 0.5 0.6 0.6 0.6 0.8 Series name P L+1MAX. 8 Type • Please refer to page 20 about the end seal configulation. Configuration φD Dimensions Cap. (µF) 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 V Code 010 2R2 3R3 4R7 100 220 330 470 101 221 331 471 10 1A 6.3 × 11 8 × 11.5 8 × 11.5 10 × 16 10 × 20 12.5 × 25 12.5 × 25 16 1C 25 1E 6.3 × 11 8 × 11.5 10 × 12.5 10 × 12.5 10 × 20 12.5 × 25 16 × 25 16 × 25 6.3 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 16 10 × 16 12.5 × 20 16 × 25 16 × 25 16 × 31.5 φ D × L (mm) 50 1H 6.3 × 11 6.3 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 16 10 × 20 12.5 × 20 12.5 × 25 16 × 31.5 Pb-free leadwire Pb-free PET sleeve 6.3 ED 8 · 10 12.5 · 16 PD HD Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. CAT.8100B