UTM1E221MHD

ALUMINUM ELECTROLYTIC CAPACITORS TM Timer Circuit Use series Ideally suited for timer circuits. Excellent leakage current stability, even subjected to load or no load at high temperature for a long time. Adapted to the RoHS directive (2002/95/EC). KL High Stability TM Performance Characteristics Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current tan δ – 40 ~ +85°C 10 ~ 50V 1 ~ 470µF ± 20% (M) (±10% (K) semi-standard) at 120Hz, 20°C After 2 minutes' application of rated voltage, leakage current is 0.001CV+1 (µA) or less. Measurement frequency : 120Hz, Temperature : 20°C Rated voltage (V) tan δ ( MAX.) 10 0.17 16 0.13 10 2 4 16 2 3 25 0.10 25 1.5 2 50 0.08 50 1.5 2 Within ±10% of initial value 150% or less of initial specified value Initial specified value or less Measurement frequency : 120Hz Stability at Low Temperature Rated voltage (V) Z– 25°C / Z+20°C Impedance ratio ZT / Z20 (MAX.) Z– 40°C / Z+20°C Endurance After 2000 hours' application of rated voltage at 85°C, capacitors meet the characteristics requirements listed at right. Capacitance change tan δ Leakage current Shelf Life Marking After storing the capacitors under no load at 85˚C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. Printed with white color letter on black sleeve. Radial Lead Type Sleeve (P.E.T.) B Type numbering system (Example : 10V 33µF) d D+0.5MAX. UTM 1 A 3 3 0 MPD P ± 0.5 1 2 3 4 5 6 7 8 9 10 11 Configuration Capacitance tolerance (M : ±20%, K : ±10%) Rated Capacitance (33µF) Rated voltage (10V) Series name Type Configuration Pb-free leadwire BD Pb-free PET sleeve 6.3 ED 8 á 10 PD 12.5 á 16 HD B Pressure relief vent L+1MAX. 15MIN 4MIN B D 6.3 8 10 12.5 16 P 2.5 3.5 5.0 5.0 7.5 B d 0.5 0.6 0.6 0.6 0.8 (mm) • Please refer to page 21 about the end seal configulation. Dimensions Cap. (µF) V Code 10 1A 16 1C 25 1E 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 010 2R2 3R3 4R7 100 220 330 470 101 221 331 471 6.3 × 11 8 × 11.5 8 × 11.5 10 × 16 10 × 20 12.5 × 25 12.5 × 25 6.3 × 11 8 × 11.5 10 × 12.5 10 × 12.5 10 × 20 12.5 × 25 16 × 25 16 × 25 6.3 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 16 10 × 16 12.5 × 20 16 × 25 16 × 25 16 × 31.5 φ D × L (mm) 50 1H 6.3 × 11 6.3 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 16 10 × 20 12.5 × 20 12.5 × 25 16 × 31.5 Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. CAT.8100V