UUA1H101MCL

ALUMINUM ELECTROLYTIC CAPACITORS UA 6mmL Chip Type, Long Life Assurance series Chip type with load life of 3000~5000 hours at +105°C. Designed for surface mounting on high density PC board. Adapted to the RoHS directive (2002/95/EC). UL Long Life UA Long Life UT Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current tan δ Performance Characteristics – 55 ~ +105°C 6.3 ~ 50V 0.1 ~ 1000µF ± 20% at 120Hz, 20°C After 2 minutes' application of rated voltage, leakage current is not more than 0.01 CV or 3 (µA) , whichever is greater. Measurement frequency : 120Hz, Temperature : 20°C Rated voltage (V) tan δ ( MAX.) 6.3 0.28 10 0.24 6.3 4 10 16 0.20 10 3 7 25 0.16 16 2 5 25 2 3 35 0.13 35 2 3 50 0.12 50 2 3 Measurement frequency : 120Hz Stability at Low Temperature Rated voltage (V) Z– 25°C / Z+20°C Impedance ratio ZT / Z20 (MAX.) Z– 55°C / Z+20°C Endurance After 3000 hours' (5000 hours for φ8, φ10) application of rated voltage at 105°C , capacitors meet the characteristic requirements listed at right. Capacitance change tan δ Leakage current Within ±30% of initial value 300% or less of initial specified value Initial specified value or less Shelf Life Resistance to soldering heat Marking After storing the capacitors under no load at 105°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. The capacitors shall be kept on the hot plate maintained at 250°C Capacitance change Within ±10% of initial value for 30 seconds. After removing from the hot plate and restored tan δ Initial specified value or less at room temperature, they meet the characteristic requirements Leakage current Initial specified value or less listed at right. Black print on the case top. Chip Type (φ4 ~ 6.3) Voltage ( j : 6.3V) Series φD ± 0.5 Plastic platform 0.3MAX. C ± 0.2 0.5MAX. Positive Type numbering system (Example : 16V 10µF) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 UUA 1 C 1 0 0 MC L 1 GS Taping code A ± 0.2 A ± 0.2 Configuration Capacitance tolerance (– 20%) Rated Capacitance (10 F) Rated voltage (16V) Series name Type φD 4 ~ 6.3 8 ¥ 10 B ± 0.2 L ± 0.3 Lot No. Capacitance H Code CL NL X2 33 j UA (φ8 × 10, φ10 × 10 ) Voltage ( V : 35V) Trade mark Plastic platform Series φD ± 0.5 0.3MAX. C ± 0.2 0.5MAX. E Negative Positive φD (mm) ×L 4 × 5.8 1.8 4.3 4.3 1.0 5.8 0.5 ~ 0.8 5 × 5.8 2.1 5.3 5.3 1.3 5.8 0.5 ~ 0.8 6.3 × 5.8 2.4 6.6 6.6 2.2 5.8 0.5 ~ 0.8 6.3 × 7.7 2.4 6.6 6.6 2.2 7.7 0.5 ~ 0.8 8 × 10 2.9 8.3 8.3 3.1 10 0.8 ~ 1.1 10 × 10 3.2 10.3 10.3 4.5 10 0.8 ~ 1.1 A A ± 0.2 A ± 0.2 B C E L H X2 100V UA B ± 0.2 L ± 0.5 Lot No. Capacitance H Pressure relief vent Voltage V 6.3 Code j 10 A 16 C 25 E 35 V 50 H Dimension table in next page. E Negative CAT.8100V ALUMINUM ELECTROLYTIC CAPACITORS UA Cap.(µF) series Dimensions V Code 6.3 0J 10 1A 16 1C 25 1E 35 1V 50 1H 4 × 5.8 4 × 5.8 4 × 5.8 4 × 5.8 4 × 5.8 4 × 5.8 4 × 5.8 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 0R1 R22 R33 R47 010 2R2 3R3 4R7 100 220 330 470 101 221 331 471 102 4 × 5.8 5 × 5.8 5 × 5.8 6.3 × 5.8 6.3 × 7.7 8 × 10 10 × 10 10 × 10 4 × 5.8 4 × 5.8 1 2.6 3.2 5 8 12 17 22 32 58 140 170 310 16 27 44 57 92 151 375 5 × 5.8 6.3 × 5.8 6.3 × 7.7 8 × 10 8 × 10 10 × 10 18 30 48 50 81 216 290 320 5 × 5.8 6.3 × 5.8 6.3 × 5.8 6.3 × 7.7 8 × 10 10 × 10 10 × 10 27 44 50 63 116 320 450 5 × 5.8 6.3 × 5.8 6.3 × 7.7 8 × 10 10 × 10 10 × 10 22 35 38 69 120 290 320 410 5 × 5.8 5 × 5.8 6.3 × 5.8 6.3 × 7.7 8 × 10 10 × 10 10 × 10 30 35 50 81 141 290 320 5 × 5.8 6.3 × 5.8 6.3 × 5.8 6.3 × 7.7 10 × 10 10 × 10 10 × 10 Case size φ D × L (mm) Rated ripple Rated Ripple (mArms) at 105°C 120Hz Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 10 kHz~ 1.50 Taping specifications are given in page 24. Recommended land size, soldering by reflow are given in page 25, 26. Please refer to page 3 for the minimum order quantity. CAT.8100V