UUE1V102MRS1MS

ALUMINUM  ELECTROLYTIC  CAPACITORS UUE Chip Type ,  Vibration Resistance Chip type with load life of 2000 to 5000 hours at 125°C. Suited for automobile electronics where heavy duty services are indispensable. Compliant to the RoHS directive (2011/65/EU). UUB UUE Vibration Resistance Specifications Item Performance Characteristics Category Temperature Range – 55 to +125°C ( φ 12.5 to 18) – 40 to +125°C ( φ 8 , φ 10) Rated Voltage Range 10 to 50V Rated Capacitance Range 33 to 4700µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.03CV or 4 (µA), whichever is greater. For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. 10 16 25 35 50 120Hz φ 8, φ 10 0.26 0.20 0.16 0.14 0.14 20°C φ 12.5 to φ 18 0.22 0.18 0.16 0.14 0.12 Rated voltage (V) Tangent of loss angle (tan δ) tan δ (MAX) Rated voltage (V) Stability at Low Temperature Impedance ratio Z– 40°C / Z+20°C (MAX) 10 16 25 35 50 φ 8 , φ 10 10 8 6 4 4 φ 12.5 to φ 18 8 6 3 3 4 The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 5000 hours (2000 hours for φ D = 8 and 10) at 125°C. Endurance 120Hz Within ±30% of the initial capacitance value 300% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current Shelf Life After storing the capacitors under no load at 125°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Black print on the case top. Chip Type 1 (φ8 , φ10) C±0.2 0.3 MAX. B±0.2 A2E 330 10V φ D±0.5 Voltage 0.5 MAX. Plastic platform Capacitance H L±1.0 Lot No. 3 4 5 6 7 8 9 φ12.5 to 18 Taping MS Configuration Size code φ12.5 to 18 Tray ZD Capacitance Configuration Tolerance (±20%) Negative (φ12.5 to φ18) Rated capacitance 330µF) Rated voltage (50V) 0.5MAX. Rated voltage (50V) Series name Series name Type φD φD Aid electrode φ12.5 to φ18 The standard structure product is also available upon request, please ask for details. Dimensions 10 1A 33 47 100 220 330 470 Code 330 470 101 221 331 471 680 681 8 × 10 10 × 10 12.5 × 13.5 12.5 × 16 1000 102 12.5 × 16 2200 222 3300 4700 332 472 18 × 16.5 16 × 21.5 18 × 16.5 18 × 21.5 16 1C 140 190 750 900 8 × 10 10 × 10 12.5 × 13.5 12.5 × 13.5 16 × 16.5 140 190 750 750 1000 900 18 × 16.5 1200 1200 1200 1200 1550 18 × 16.5 1200 8 × 10 10 × 10 12.5 × 13.5 16 × 16.5 18 × 16.5 16 × 21.5 18 × 21.5 Frequency 50 Hz 33 to 330 0.47 100 to 680 0.53 φ 12.5 to φ 18 1000 to 4700 0.74 Cap.(µF) 120 Hz 0.67 0.67 0.87 300 Hz 0.78 0.82 0.96 1 kHz 0.91 0.89 0.98 16 (mm) 18 A 2.9 8.3 8.3 3.2 10.3 10.3 4.8 5.4 13.6 17.117.1 19.119.1 13.6 C C 8.3 8.3 10.3 10.3 13.6 17.117.1 19.119.1 13.6 E E 3.1 3.1 4.5 4.5 LL 10 10 1010 3.2 4.8 4.04.0 5.4 6.3 6.3 18 6.4 6.4 6.3 6.3 13.5,1616.5,21.5 16.5,21.5 16.5,21.5 13.5,16 16.5,21.5 1.1 1.51.51.01.0 to 1.4 1.0 to 1.0 to1.0 1.4to 1.4 1.1toto1.5 1.51.11.1to to to 1.4 1.01.4to 1.4 35 1V 140 190 750 1000 1200 1200 1550 50 1H 8 × 10 10 × 10 12.5 × 13.5 16 × 16.5 16 × 16.5 18 × 16.5 100 150 550 1000 1000 1200 18 × 21.5 1400 8 × 10 10 × 10 12.5 × 13.5 16 × 16.5 16 × 16.5 18 × 16.5 90 130 500 850 850 950 Case size φ D × L (mm) Rated ripple Rated ripple current (mArms) at 125°C 100kHz In this case,  6 will be put at 12th digit of type numbering system, " " φD 12.5 16 2.9 25 1E Frequency coefficient of rated ripple current φ 8 , φ 10 10 12.5 H H V Cap.(μF) 8 10 B B Negative Type (mm) 8 A H L±1.0 Pressure relief vent 8 to 18 Rated capacitance(330µF) A±0.2 E A±0.2 B±0.2 φ D±0.5 330 µF UE  50V H1015 nichicon Series Capacitance C±0.2 0.3 MAX. 10 kHz or more 1.00 1.00 1.00 Taping specifications are given in page 23. Recommended land size, soldering by reflow are given in page 18, 19. Please refer to page 3 for the minimum order quantity. 166 Code GS MS ZD φD Capacitance Tolerance (±20%) ( Positive Plastic platform Package code Size Package φ8,10 Taping Size Code φ12.5Package to 18 Taping φ8,10 Taping GS Size code φ12.5 to 18 Tray Package code φ8 to φ10 The standard structure product is also available upon request, please refer to page145(UUB). Voltage Lot No. 12 13 14 UUE 1 H 3 3 1 M NS 1 MS Pressure relief vent Trade mark 10 11 A±0.2 E A±0.2 125° C Marking Trade mark 2 Type numbering system (Example : 50V 330µF) U1 U E 1 H 3 3 1 M NS 1 MS 2 3 4 5 6 7 8 9 10 11 12 13 14 Positive 8