UUE1V471MNS1MS

ALUMINUM ELECTROLYTIC CAPACITORS UUE Chip Type , Vibration Resistance Chip type with load life of 2000 to 5000 hours at 125°C. Suited for automobile electronics where heavy duty UUB services are indispensable. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). AEC-Q200 compliant. Please contact us for details. UUE Vibration Resistance High Temperature UBC Specifications Item Performance Characteristics Category Temperature Range – 40 to +125°C ( φ 8 , φ 10) , – 55 to +125°C ( φ 12.5 to 18) Rated Voltage Range 10 to 50V Rated Capacitance Range 33 to 4700µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.03CV or 4 (µA), whichever is greater. For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. ( φ12.5 to φ18 ) 10 16 25 35 50 120Hz φ 8, φ 10 0.26 0.20 0.16 0.14 0.14 20°C φ 12.5 to φ 18 0.22 0.18 0.16 0.14 0.12 Rated voltage (V) Tangent of loss angle (tan δ) tan δ (MAX) Rated voltage (V) Stability at Low Temperature Impedance ratio Z– 40°C / Z+20°C (MAX) 10 16 25 35 50 φ 8 , φ 10 10 8 6 4 4 φ 12.5 to φ 18 8 6 3 3 4 The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 5000 hours (2000 hours for φ D = 8 and 10) at 125°C. Endurance 120Hz Within ±30% of the initial capacitance value 300% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current Shelf Life After storing the capacitors under no load at 125°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Black print on the case top. Chip Type Type numbering system (Example : 50V 330µF) 1 (φ8 , φ10) C±0.2 0.3 MAX. B±0.2 A2E 330 10V φ D±0.5 Voltage 0.5 MAX. Capacitance H L±1.0 Lot No. 2 3 2 3 4 4 5 5 6 6 7 7 8 8 9 9 12 13 14 12 13 14 Size Size code code Configuration Configuration (±20%) Capacitance Tolerance (±20%) Capacitance Tolerance Negative Rated capacitance(330 Rated capacitanceµ(F) 330µF) φ8 to φ10 The standard structure product is also available upon request, please refer to UUB. (φ12.5 to φ18) Rated voltage (50V)( Rated voltage 50V) Series name Series name Positive L±1.0 Type φD A±0.2 E A±0.2 B±0.2 φ D±0.5 330 µF UE  50V H1015 Series Capacitance C±0.2 0.3 MAX. Voltage Lot No. Trade mark 0.5MAX. Plastic platform H 12.5 16 (mm) 18 (mm) 6.4 18 3.210 12.5 4.8 5.4 16 8.3 2.9 10.3 3.2 13.6 4.8 17.15.4 19.1 6.4 C B 8.3 8.3 10.3 10.3 13.6 13.6 17.117.1 19.119.1 E C 3.1 8.3 4.5 10.3 10 3.1 104.5 10 10 L E L Aid electrode 10 8 2.9 H φ12.5 to φ18 The standard structure product is also available upon request, please ask for details. φD 8 B A A Negative Pressure relief vent Taping code Taping code Size Size Code Code GS φ8,10 φ8,10 GS MS φ12.5 φ12.5 to 18 to 18 MS Pressure relief vent nichicon 10 11 10 11 A±0.2 E A±0.2 125° C Marking Trade mark 1 U U EE 11 HH 33331 1MMN NS S1 1 UU MM S S Positive Plastic platform H 4.0 13.6 Type 6.317.1 6.3 19.1 13.5,16 4.0 16.5,21.5 6.3 16.5,21.5 6.3 1.1 to 1.5 1.1 to 1.5 1.0 to 1.4 1.0 to 1.4 1.0 to 1.4 13.5,16 16.5,21.5 16.5,21.5 1.1 to 1.5 1.1 to 1.5 1.0 to 1.4 1.0 to 1.4 1.0 to 1.4 Frequency coefficient of rated ripple current φD Frequency Cap.(µF) 33 to 330 100 to 680 φ 12.5 to φ 18 1000 to 4700 φ 8 , φ 10 50 Hz 0.47 0.53 0.74 120 Hz 0.67 0.67 0.87 300 Hz 0.78 0.82 0.96 1 kHz 0.91 0.89 0.98 10 kHz or more 1.00 1.00 1.00 Dimension table in next page. CAT.8100K φD 8 to 18 8 ALUMINUM ELECTROLYTIC CAPACITORS UUE ■ Dimensions Rated Voltage （V） （code） 10 （1A） Rated Capacitance （µF） Case Size φD×L（mm） tan δ 220 8× 10 0.26 25 （1E） 50 （1H） ） 66 140 Part Number UUE1A221MNS1GS 330 10× 10 0.26 99 190 UUE1A331MNS1GS 12.5× 13.5 0.22 141 750 UUE1A471MNS1MS 680 12.5× 16 0.22 204 900 UUE1A681MNS1MS 1000 12.5×16 0.22 300 900 UUE1A102MNS1MS 0.24 660 1200 UUE1A222MNS1MS 18×16.5 2200 16× 21.5 0.24 660 1200 UUE1A222MNS6MS 3300 18× 16.5 0.26 990 1200 UUE1A332MNS1MS 4700 18× 21.5 0.28 1410 1550 UUE1A472MNS1MS 100 8× 10 0.20 48 140 UUE1C101MNS1GS 220 10× 10 0.20 105.6 190 UUE1C221MNS1GS 330 12.5× 13.5 0.18 158.4 750 UUE1C331MNS1MS 470 12.5×13.5 0.18 225.6 750 UUE1C471MNS1MS 680 16× 16.5 0.18 326.4 1000 UUE1C681MNS1MS 1000 18× 16.5 0.18 480 1200 UUE1C102MNS1MS 2200 18× 16.5 0.20 1056 1200 UUE1C222MNS1MS 100 8× 10 0.16 75 140 UUE1E101MNS1GS 220 10× 10 0.16 165 190 UUE1E221MNS1GS 330 12.5× 13.5 0.16 247.5 750 UUE1E331MNS1MS 470 16× 16.5 0.16 352.5 1000 UUE1E471MNS1MS 680 18× 16.5 0.16 510 1200 UUE1E681MNS1MS 680 16×21.5 0.16 510 1200 UUE1E681MNS6MS 1000 18× 21.5 0.16 750 1550 UUE1E102MNS1MS 8× 10 0.14 100 UUE1V470MNS1GS 47 35 （1V） （ 470 2200 16 （1C） Leakage Current Rated Ripple （µA） （mArms） at 20℃ after （125℃/100kHz） 1 minute 49.35 100 10× 10 0.14 105 150 UUE1V101MNS1GS 220 12.5×13.5 0.14 231 550 UUE1V221MNS1MS 330 16×16.5 0.14 346.5 1000 UUE1V331MNS1MS 470 16× 16.5 0.14 493.5 1000 UUE1V471MNS1MS 680 18× 16.5 0.14 714 1200 UUE1V681MNS1MS 1000 1050 18× 21.5 0.14 1400 UUE1V102MNS6MS 33 8× 10 0.14 49.5 90 UUE1H330MNS1GS 47 10× 10 0.14 70.5 130 UUE1H470MNS1GS 100 12.5× 13.5 0.12 150 500 UUE1H101MNS1MS 220 16× 16.5 0.12 330 850 UUE1H221MNS1MS 330 16× 16.5 0.12 495 850 UUE1H331MNS1MS 470 18× 16.5 0.12 705 950 UUE1H471MNS1MS For taping specifications, recommended land size/soldering by reflow and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100K