UUG1V103MRQ1ZD

ALUMINUM  ELECTROLYTIC  CAPACITORS UUG Chip Type, Higher Capacitance Range Chip Type , higher capacitance in larger case sizes (φ12.5, φ16, φ18) Designed for surface mounting on high density PC board. Applicable to automatic mounting machine fed with carrier tape and tray. Compliant to the RoHS directive (2011/65/EU). UUJ Wide Temperature UUG Specifications Item Performance Characteristics –40 to +85°C 6.3 to 450V 4.7 to 10000µF ± 20% at 120Hz, 20°C Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current Rated voltage (V) 6.3 to 100 — After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.03CV or 4 (µA), whichever is greater. 160 to 450 I = 0.04CV+100 (  µA) max. (1 minute's at 20°C) Measurement frequency : 120Hz at 20°C Tangent of loss angle (tan δ) Rated voltage (V) tan δ (MAX.) 6.3 0.28 10 0.24 16 0.20 25 0.16 35 0.14 50 0.12 63 0.10 100 0.08 160 to 250 400 • 450 0.25 0.20 For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Measurement frequency: 120Hz Stability at Low Temperature Rated voltage (V) Impedance ratio ZT / Z20 (MAX.) Z–25°C / Z+20°C Z–40°C / Z+20°C 6.3 5 12 10 4 10 16 3 8 25 2 5 35 2 4 50 2 3 Capacitance change tan δ Leakage current 63 2 3 100 2 3 160 to 250 400 • 450 3 6 6 10 Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 85°C. Shelf Life After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Black print on the case top. Chip Type Type numbering system (Example : 50V 330µF) Plastic platform Pressure relief vent Capacitance Positive 0.5 MAX. C ±0.2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 U U G 1 H 3 3 1 M NQ 1 M S Package code A ±0.2 0.3 MAX. L ±1.0 A ±0.2 E B ±0.2 φD ±0.5 nichicon 330 µF UG  50V H1015 Voltage Lot No. Trade mark Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value H Negative Series Size code Taping MS Tray ZD Configuration Capacitance Tolerance (±20%) Rated capacitance (330µF) Rated voltage (50V) Series name (mm) Type φD 12.5×13.5 12.5×16. 12.5×21. 16×16.5. 16×21.5. 18×16.5. 18×21.5. 4.8 4.8 5.4 5.4 6.4 6.4 A 4.8 13.6 13.6 17.1 17.1 19.1 19.1 B 13.6 13.6 13.6 17.1 17.1 19.1 19.1 C 13.6 4.0 4.0 6.3 6.3 6.3 6.3 E 4.0 13.5 16.0 16.5 21.5 16.5 21.5 L 21.0 H 1.0 to 1.4 1.0 to 1.4 1.0 to 1.4 1.0 to 1.4 1.0 to 1.4 1.0 to 1.4 1.0 to 1.4 The vibration structure-resistant product is also available upon request, please ask for details. Dimension table in next page. 160 ALUMINUM  ELECTROLYTIC  CAPACITORS UUG Dimensions (µF) V 6.3 10 16 25 35 50 0J 1A 1C 1E 1V 1H Code Cap. 220 221 12.5 × 13.5 450 330 331 12.5 × 13.5 520 470 471 1000 102 2200 222 12.5 × 16.0 890 3300 332 16 × 16.5 1200 4700 472 16 × 16.5 6800 682 18 × 16.5 10000 103 18 × 21.5 V (µF) Cap. Code 4.7 12.5 × 13.5 12.5 × 13.5 550 12.5 × 13.5 580 16 × 16.5 740 18 × 21.5 1150 620 12.5 × 13.5 710 12.5 × 16.0 820 16 × 16.5 1000 12.5 × 16.0 960 16 × 16.5 1150 18 × 16.5 1350 18 × 21.5 1550 16 × 16.5 1300 18 × 16.5 1450 18 × 21.5 1700 1400 18 × 16.5 1500 18 × 21.5 1750 1650 18 × 21.5 1850 2000 18 × 21.5 2200 63 100 160 200 250 400 1J 2A 2C 2D 2E 2G 4R7 10 100 22 220 12.5 × 13.5 33 330 47 470 16 × 16.5 140 235 12.5 × 16.0 240 18 × 16.5 280 16 × 21.5 275 12.5 × 16.0 310 16 × 16.5 340 18 × 21.5 350 18 × 21.5 345 18 × 21.5 430 Case size φ D × L (mm) Rated ripple 12.5 × 16.0 370 16 × 16.5 415 18 × 16.5 415 18 × 21.5 490 12.5 × 13.5 350 16 × 16.5 500 18 × 16.5 505 12.5 × 13.5 370 12.5 × 16.0 440 18 × 16.5 590 18 × 21.5 590 220 221 12.5 × 16.0 580 18 × 16.5 665 330 331 16 × 16.5 680 18 × 21.5 825 470 471 18 × 16.5 850 : In this case,  6 will be put at 12th digit of type numbering system. Size φ12.5×21L is available for capacitors marked." " In this case,  6 will be put at 12th digit of type numbering system. Size φ16×21.5L is available for capacitors marked." " ｝ Frequency coefficient of rated ripple current 6.3 to 100 160 to 450 50Hz 0.75 0.80 0.85 0.80 120Hz 1.00 1.00 1.00 1.00 300Hz 1.35 1.23 1.10 1.25 115 140 101 Frequency 12.5 × 13.5 16 × 16.5 680 68 100 to 4700 1000 to 10000 4.7 to 100 115 150 68 Cap.(µF) 2W 12.5 × 13.5 12.5 × 13.5 100 V 450 1kHz 1.57 1.34 1.13 1.40 Taping specifications are given in page 23. Recommended land size, soldering by reflow are given in page 18, 19. Please refer to page 3 for the minimum order quantity. 161 10kHz or more 2.00 1.50 1.15 1.60 Rated ripple current (mArms) at 85°C 120Hz