UUJ2E470MRQ1MS

ALUMINUM  ELECTROLYTIC  CAPACITORS UUJ Chip Type, Higher Capacitance Range Chip Type, higher capacitance in larger case sizes (φ12.5, φ16, φ18) Designed for surface mounting on high density PC board. Applicable to automatic mounting machine fed with carrier tape and tray. Compliant to the RoHS directive (2011/65/EU). UUJ UUN Bi-Polarized Specifications Item Performance Characteristics –55 to +105°C (6.3 to 100V), –40 to +105°C (160 to 450V) 6.3 to 450V 3.3 to 6800µF ± 20% at 120Hz, 20°C Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current Rated voltage (V) 6.3 to 100 — After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.03CV or 4 (µA), whichever is greater. 160 to 450 I = 0.04CV+100 (  µA) max. (1 minute's at 20°C) Measurement frequency : 120Hz at 20°C Rated voltage (V) tan δ (MAX.) Tangent of loss angle (tan δ) 6.3 0.26 10 0.22 16 0.18 25 0.16 35 0.14 50 0.12 63 0.10 100 0.08 160 to 250 400 • 450 0.20 0.15 For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Measurement frequency: 120Hz Rated voltage (V) Stability at Low Temperature Impedance ratio Z–25°C / Z+20°C ZT / Z20 (MAX.) Z–40°C / Z+20°C 6.3 5 10 10 4 8 16 3 6 35 2 3 50 2 3 Capacitance change tan δ Leakage current The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 5000 hours at 105°C. Endurance 25 2 4 63 2 3 100 2 3 160 to 250 400 • 450 3 6 6 10 Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Shelf Life After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Black print on the case top. Chip Type Type numbering system (Example : 50V 330µF) Plastic platform Capacitance 0.5 MAX. B ±0.2 L ±1.0 1 A ±0.2 E A ±0.2 Pressure relief vent Positive C ±0.2 0.3 MAX. φD ±0.5 nichicon Trade mark 330 µF UJ 50V H1015 Voltage Lot No. H Negative Series 2 3 4 5 6 7 8 9 10 11 12 13 14 U U J 1 H 3 3 1 M NQ 1 MS Package code Taping MS Tray ZD Size code Configuration Capacitance Tolerance (±20%) Rated capacitance (330µF) Rated voltage (50V) Series name (mm) Type φD 12.5×13.5 12.5×16. 12.5×21. 16×16.5. 16×21.5. 18×16.5. 18×21.5. 4.8 4.8 5.4 5.4 6.4 6.4 A 4.8 13.6 13.6 17.1 17.1 19.1 19.1 B 13.6 13.6 13.6 17.1 17.1 19.1 19.1 C 13.6 4.0 4.0 6.3 6.3 6.3 6.3 E 4.0 13.5 16.0 16.5 21.5 16.5 21.5 L 21.0 H 1.0 to 1.4 1.0 to 1.4 1.0 to 1.4 1.0 to 1.4 1.0 to 1.4 1.0 to 1.4 1.0 to 1.4 The vibration structure-resistant product is also available upon request, please ask for details. Dimension table in next page. 162 12. ALUMINUM  ELECTROLYTIC  CAPACITORS UUJ Dimensions V (µF) Cap. Code 6.3 0J 10 1A 220 221 330 331 470 471 1000 102 12.5 × 13.5 440 12.5 × 16.0 2200 222 16 × 16.5 750 3300 332 18 × 16.5 4700 472 18 × 21.5 6800 682 18 × 21.5 1350 V (µF) Cap. Code 3.3 3R3 4.7 4R7 16 1C 25 1E 35 1V 50 1H 12.5 × 13.5 280 12.5 × 16.0 320 12.5 × 13.5 320 12.5 × 16.0 360 16 × 16.5 440 12.5 × 13.5 360 12.5 × 16.0 400 16 × 16.5 490 18 × 16.5 550 500 16 × 16.5 630 18 × 16.5 700 18 × 16.5 750 18 × 21.5 820 16 × 16.5 810 18 × 16.5 930 18 × 21.5 1050 18 × 21.5 1150 930 18 × 16.5 1000 18 × 21.5 1150 1100 18 × 21.5 1200 18 × 21.5 1450 63 100 160 200 250 400 1J 2A 2C 2D 2E 2G 450 2W 12.5 × 13.5 40 50 12.5 × 13.5 65 12.5 × 16.0 50 12.5 × 16.0 10 100 12.5 × 13.5 80 12.5 × 16.0 105 16 × 16.5 85 16 × 16.5 85 22 220 12.5 × 16.0 105 16 × 16.5 180 18 × 21.5 130 18 × 21.5 130 33 330 18 × 21.5 160 18 × 21.5 160 47 470 12.5 × 13.5 95 16 × 16.5 220 18 × 16.5 230 12.5 × 13.5 160 16 × 16.5 260 18 × 16.5 270 18 × 21.5 280 18 × 21.5 340 68 680 12.5 × 13.5 175 12.5 × 16.0 205 18 × 16.5 320 18 × 21.5 330 100 101 12.5 × 16.0 225 16 × 16.5 285 16 × 21.5 380 18 × 21.5 410 220 221 16 × 16.5 385 18 × 16.5 440 330 331 18 × 16.5 490 18 × 21.5 500 470 471 18 × 21.5 590 Case size φ D × L (mm) : In this case,  6 will be put at 12th digit of type numbering system. Size φ12.5×21L is available for capacitors marked." " In this case,  6 will be put at 12th digit of type numbering system. Size φ16×21.5L is available for capacitors marked." " ｝ Frequency coefficient of rated ripple current V 6.3 to 100 160 to 450 Cap.(µF) Frequency  47 to 680/ 100 to 4700 1000 to 6800 3.3 to 100 50Hz 0.75 0.80 0.85 0.80 120Hz 1.00 1.00 1.00 1.00 300Hz 1.35 1.23 1.10 1.25 1kHz 1.57 1.34 1.13 1.40 Taping specifications are given in page 23. Recommended land size, soldering by reflow are given in page 18, 19. Please refer to page 3 for the minimum order quantity. 163 10kHz or more 2.00 1.50 1.15 1.60 Rated ripple Rated ripple current (mArms) at 105°C 120Hz