ALUMINUM ELECTROLYTIC CAPACITORS
UK
6mmL Chip Type, For general Audio Equipment
series
Chip type acoustic series. Applicable to automatic insertion machine using carrier tape. Adapted to the RoHS directive (2002/95/EC)
UK
Specifications
Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance
Leakage Current
Chip
MW
Performance Characteristics
– 40 ~ +85°C 4 ~ 50V 0.1 ~ 220µF ± 20% at 120Hz, 20°C After 2 minutes' application of rated voltage, leakage current is not more than 0.01 CV or 3 (µA) , whichever is greater.
Measurement frequency : 120Hz, Temperature : 20°C Rated voltage (V) tan δ ( MAX.)
tan δ
4 0.35
6.3 0.26 4 7 15
10 0.20 6.3 4 8
16 0.16 10 3 8
25 0.14 16 2 4 25 2 4
35 0.12 35 2 3
50 0.12 50 2 3
Measurement frequency : 120Hz
Stability at Low Temperature
Rated voltage (V) Z– 25°C / Z+20°C Impedance ratio ZT / Z20 (MAX.) Z– 40°C / Z+20°C
Endurance
After 2000 hours' application of rated voltage at 85°C, capacitors meet the characteristics requirements listed at right.
Capacitance change tan δ Leakage current
Within ± 20% of initial value 200% or less of initial specified value Initial specified value or less
Shelf Life Resistance to soldering heat Marking
After storing the capacitors under no load at 85°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. The capacitors shall be kept on the hot plate maintained at 250°C Capacitance change Within ±10% of initial value for 30 seconds. After removing from the hot plate and restored tan δ Initial specified value or less at room temperature, they meet the characteristics requirements Initial specified value or less Leakage current listed at right. Black print on the case top.
Chip Type
Capacitance Lot No. ∗Voltage Plastic platform 0.3MAX. 0.5MAX. Positive
Type numbering system (Example : 16V 10µF)
1 2 3 4 5 6 7 8 9 10 11 12 13 14
U U K 1 C 1 0 0 MCO 1 G S
(mm)
φD
C±0.2
Taping code Size code Configuration Rated Capacitance tolerance ( ± 20%) Capacitance (10µF ) Rated voltage (16V ) Series name Type
L ± 0.3 0.5 ~ 0.8 ∗Voltage mark for 6.3V is 6V .
A B C E L
4 1.8 4.3 4.3 1.0 5.8
5 6.3 2.1 2.4 5.3 6.6 5.3 6.6 1.3 2.2 5.8 5.8
Negative
Dimensions
V Cap.(µF) Code
4 0G
6.3 0J
A±0.2 A±0.2
X2 10 16V
φD±0.5
B ± 0.2
E
10 1A
16 1C
25 1E
35 1V 4 4 4 4 4 4 4 5 6.3
50 1H 1.0 2.0 2.8 4.0 8.4 13 17 20 33
0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220
0R1 R22 R33 R47 010 2R2 3R3 4R7 100 220 330 470 101 221
4 4 5 6.3
28 33 56 96
4 5 5 6.3
28 37 45 70
5 5 6.3
33 41 52
4 5 6.3 6.3
23 37 49 58
4 5 6.3 6.3
16 27 42 52
4 5 6.3
18 29 46
Case size φ D
Rated ripple
Rated Ripple(mArms)at 85°C 120Hz
Frequency coefficient of rated ripple current
Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 10 kHz~ 1.50
Taping specifications are given in page 24. Recommended land size, soldering by reflow are given in page 25, 26. Please refer to page 3 for the minimum order quantity.
CAT.8100V
很抱歉,暂时无法提供与“UUK1C330MCO”相匹配的价格&库存,您可以联系我们找货
免费人工找货