UUL1V221MNL1GS

ALUMINUM  ELECTROLYTIC  CAPACITORS UUL Chip Type,  Long Life Assurance Chip type with load life of 5000 hours at +105°C. Designed for surface mounting on high density PC board. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). AEC-Q200 compliant. Please contact us for details. UCB UUL Long Life UUA Long Life Specifications Item Performance Characteristics Category Temperature Range –40 to +105°C Rated Voltage Range 6.3 to 50V Rated Capacitance Range 1 to 1000µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01 CV or 3 (µA), Max Measurement frequency : 120Hz at 20°C Rated voltage (V) tan δ (MAX.) Tangent of loss angle (tan δ) 6.3 0.32 10 0.24 16 0.20 25 0.16 35 0.13 50 0.12 Measurement frequency : 120Hz Stability at Low Temperature 10 3 7 6.3 4 10 Rated voltage (V) Z– 25°C / Z+20°C Impedance ratio ZT / Z20 (MAX.) Z– 40°C / Z+20°C The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 5000 hours at 105°C. Endurance 35 2 3 25 2 3 16 2 5 50 2 3 Within ±30% of the initial capacitance value 300% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. The capacitors are kept on a hot plate for 30 seconds, which is Capacitance change Within ±10% of the initial capacitance value maintained at 250°C. The capacitors shall meet the characteristic Less than or equal to the initial specified value tan δ requirements listed at right when they are removed from the plate Less than or equal to the initial specified value Leakage current and restored to 20°C. Shelf Life Resistance to soldering heat Black print on the case top. Marking Chip Type Type numbering system (Example : 16V 100µF) (φ4 to φ6.3) Positive 1 Plastic platform 0.5 MAX. H L±0.3 Capacitance Lot No. 2 3 4 5 6 7 8 9 10 11 12 13 14 UU L 1 C 1 0 1 M C L 1 GS A±0.2 E A±0.2 B±0.2 φD±0.5 A2 10C UL Voltage (C : 16V) C±0.2 0.3 MAX. Series Package code Configuration Capacitance tolerance (±20%) φD 4 to 6.3 Rated capacitance (100µF) 8 • 10 Rated voltage (16V) Negative Code CL NL Series name Type (φ8,φ10 ) Lot No. C±0.2 H L±0.5 Capacitance (mm) φD×L A±0.2 E A±0.2 φD±0.5 A2 100V UL Trade mark Plastic platform 0.3 MAX. Series B±0.2 Voltage (V : 35V) 0.5 MAX. Positive Negative Pressure relief vent Voltage V 6.3 Code j 10 A 16 C 25 E 35 V 50 H Dimension table in next page. 140 4 × 5.8 5 × 5.8 6.3 × 5.8 6.3 × 7.7 8 × 10 A 1.8 2.1 2.4 2.4 2.9 10 × 10 3.2 B 4.3 5.3 6.6 6.6 8.3 10.3 C 4.3 5.3 6.6 6.6 8.3 10.3 E 1.0 1.3 2.2 2.2 3.1 4.5 L 5.8 5.8 5.8 7.7 10 10 H 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 ALUMINUM  ELECTROLYTIC  CAPACITORS UUL Dimensions V Cap. (µF) Code 6.3 10 16 25 35 50 0J 1A 1C 1E 1V 1H 1 010 4 × 5.8 2.2 2R2 4 × 5.8 11 3.3 3R3 4.7 4R7 10 100 22 220 33 330 5 × 5.8 47 470 5 × 5.8 100 6.2 4 × 5.8 14 4 × 5.8 15 5 × 5.8 19 4 × 5.8 18 5 × 5.8 25 5 × 5.8 25 6.3 × 5.8 30 5 × 5.8 30 5 × 5.8 30 6.3 × 5.8 42 6.3 × 5.8 42 6.3 × 7.7 49 35 5 × 5.8 35 6.3 × 5.8 48 6.3 × 5.8 48 6.3 × 7.7 57 8 × 10 77 36 6.3 × 5.8 50 6.3 × 5.8 50 6.3 × 7.7 63 8 × 10 92 101 6.3 × 5.8 60 6.3 × 7.7 81 6.3 × 7.7 81 10 × 10 151 220 221 6.3 × 7.7 101 8 × 10 141 10 × 10 330 331 8 × 10 160 10 × 10 238 10 × 10 470 471 10 × 10 254 10 × 10 254 10 × 10 254 1000 102 10 × 10 313 8 × 10 92 8 × 10 116 10 × 10 151 216 10 × 10 216 10 × 10 216 238 10 × 10 238 Case size φ D × L (mm) Rated ripple Rated ripple current (mArms) at 105°C 120Hz Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 10 kHz or more 1.50 Taping specifications are given in page 23. Recommended land size, soldering by reflow are given in page 18, 19. Please refer to page 3 for the minimum order quantity. 141