UUX0J102MCL

UUX0J102MCL

  • 厂商:

    NICHICON(尼吉康)

  • 封装:

  • 描述:

    UUX0J102MCL - ALUMINUM ELECTROLYTIC CAPACITORS - Nichicon corporation

  • 详情介绍
  • 数据手册
  • 价格&库存
UUX0J102MCL 数据手册
ALUMINUM ELECTROLYTIC CAPACITORS UX Chip Type, Higher Capacitance Range series Chip type, higher capacitance in larger case sizes. . Designed for surface mounting on high density PC board. Applicable to automatic mounting machine using carrier tape. Adapted to the RoHS directive (2002/95/EC). UB High Temperature UJ Extended range UX Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current tan δ Performance Characteristics – 55 ~ +105°C 6.3 ~ 100V 4.7 ~ 1000µF ± 20% at 120Hz, 20°C After 1 minute's application of rated voltage, leakage current is not more than 0.03CV (µA). Measurement frequency : 120Hz, Temperature : 20°C Rated voltage (V) tan δ ( MAX.) 6.3 0.22 10 0.19 6.3 4 16 0.16 10 4 25 0.14 16 3 35 0.12 25 3 35 3 50 0.10 50 2 63 0.10 63 3 100 0.08 100 4 Measurement frequency : 120Hz Rated voltage (V) Stability at Low Temperature Impedance ratio ZT / Z20 (MAX.) Z– 55°C / Z+20°C Endurance After 2000 hours' application of rated voltage at 105°C, capacitors meet the characteristic requirements listed at right. Capacitance change tan δ Leakage current Within ±20% of initial value 200% or less of intial specified value Initial specified value or less Shelf Life Resistance to soldering heat Marking After storing the capacitors under no load at 105°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. The capacitors shall be kept on the hot plate maintained at 250°C for 30 seconds. After removing from the hot plate and restored at room temperature, they meet the characteristic requirements listed at right. Black print on the case top. Capacitance change tan δ Leakage current Within ±10% of initial value Initial specified value or less Initial specified value or less Chip Type (φ6.3, φ8 × 6.2) 105°C Marking Lot No. Capacitance 2Voltage φD±0.5 Type numbering system (Example : 10V 100µF) Positive C±0.2 0.5MAX. Plastic platform 0.3MAX. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 UUX 1 A 1 0 1 M CL 1GS Package code A±0.2 Size code 1 Size φ8 × 6.2 only 2 Voltage mark for 6.3V is 6V . Capacitance tolerance (–20%) Rated Capacitance (100 F) Rated voltage (10V) Series name Type Configuration D×L Code 6.3 × 7.7 CL 8 × 6.2 CL 8 × 10 NL 10 × 10 NL N2P 100 10V B±0.2 E H C±0.2 0.5MAX. 1 Trade mark L±0.3 Negative Positive (φ8 × 10, φ10 × 10) 105°C Marking Lot No. Trade mark Capacitance 2 Voltage Plastic platform 0.3MAX. A±0.2 φ D× L L±0.5 H Pressure relief vent Negative A B C E L H (mm) 10 × 10 8 × 10 6.3 × 7.7 8 × 6.2 3.2 2.9 3.3 2.4 10.3 8.3 8.3 6.6 10.3 8.3 8.3 6.6 4.5 3.1 2.3 2.2 10 10 6.2 7.7 0.5 ~ 0.8 0.5 ~ 0.8 0.8 ~ 1.1 0.8 ~ 1.1 Dimensions Cap.(mF) V Code 6.3 0J 10 1A 16 1C A±0.2 A±0.2 φD±0.5 B±0.2 N2P 100 16V E 25 1E 35 1V 50 1H 8 63 1J 100 4.7 4R7 10 100 22 220 33 8 ´ 6.2 330 47 8 ´ 6.2 79 (78) 8 ´ 10 470 100 8 ´ 10 148 (111) 181 8 ´ 10 10 ´ 10 8 ´ 6.2 90 101 220 8 ´ 10 161 (121) 8 ´ 10 10 ´ 10 330 (307) 10 ´ 10 351 (283) 10 ´ 10 173 221 330 288 372 8 ´ 10 10 ´ 10 318 (296) 10 ´ 10 441 (410) 10 ´ 10 331 (316) (326) 470 489 10 ´ 10 340 10 ´ 10 351 10 ´ 10 471 680 408 392 10 ´ 10 10 ´ 10 681 1000 10 ´ 10 495 102 Size φ6.3 × 7.7 is available for capacitors marked. " " / Size φ8 × 10 is available for capacitors marked. " " In this case, 6 will be put at 12th digit of type numbering system. 76 (75) 124 304 (283) 450 10 ´ 6.2 67 (64) ´ 10 133 ´ 10 180 (167) 310 10 ´ 10 8 8 ´ 6.2 51 8 ´ 10 108 10 ´ 10 185 (179) 220 10 ´ 10 10 ´ 10 320 ´ 6.2 42 8 ´ 10 75 10 ´ 10 150 (121) 180 10 ´ 10 10 ´ 10 230 8 2A fD ´ L (mm) Case size Rated ripple Rated Ripple (mArms) at 105°C 120Hz Frequency coefficient of rated ripple current Cap.(µF) Frequency 00 ~ 470 100 ~ 1000 50 Hz 0.80 0.85 120 Hz 1.00 1.00 300 Hz 1.15 1.08 1 kHz 1.40 1.20 10 kHz~ 1.67 1.30 Taping specifications are given in page 24. Recommended land size, soldering by reflow are given in page 25, 26. Please select UJ(p.76) series if high C/V products are reqired. Please refer to page 3 for the minimum order quantity. CAT.8100V
UUX0J102MCL
### 物料型号 - 类别温度范围:-55至+105°C - 额定电压范围:6.3V至100V - 额定电容范围:4.7μF至1000F - 电容公差:在120Hz、20°C条件下为±20% - 漏电流:在额定电压下1分钟后不超过0.03CV(μA)

### 器件简介 - UX系列为贴片式铝电解电容器,适用于高密度PCB表面贴装,并适用于自动贴装机使用卷带。 - 符合RoHS指令(2002/95/EC)。

### 引脚分配 - 该文档描述的是贴片式电容器,通常这类器件为无引脚设计,直接贴装在PCB上。

### 参数特性 - 损耗角正切(tanδ):在120Hz、25°C条件下,不同额定电压下的tanδ最大值从0.22至0.08不等。 - 低温稳定性:在-55°C/+20°C条件下,阻抗比最大值为4。 - 耐久性:在105°C条件下,经过2000小时额定电压的应用后,电容器满足特性要求。 - 漏电流:不超过初始规定值。 - 货架寿命:在20°C条件下,电容器将满足耐久性特性的指定值。

### 功能详解 - 电容器在经历250°C热板上30秒的保持后,恢复至室温,满足特性要求。 - 标记:在外壳顶部的黑色打印。

### 应用信息 - 该系列电容器适用于需要高C/V比的产品,如果需要高C/V产品,请选择UJ系列。

### 封装信息 - 提供了不同尺寸的封装代码和尺寸,例如φ6.3×7.7和φ8×10,并附有尺寸图示。 - 额定纹波电流(mArms)在105°C、120Hz条件下的频率系数。
UUX0J102MCL 价格&库存

很抱歉,暂时无法提供与“UUX0J102MCL”相匹配的价格&库存,您可以联系我们找货

免费人工找货