UVC2G8R2MPD

ALUMINUM ELECTROLYTIC CAPACITORS UVC Ultra-Miniature-Sized for adapters. UVY One rank smaller case sizes than UVY. Suited for adapter circuit. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). Smaller UVC Specifications Item Performance Characteristics Category Temperature Range – 40 to +105˚C Rated Voltage Range 400V Rated Capacitance Range 4.7 to 18µF Capacitance Tolerance ± 20% at 120Hz, 20˚C Leakage Current After 1 minute's application of rated voltage at 20°C, I = 0.04CV+100 (µA) or less Rated voltage (V) tan δ (MAX.) Tangent of loss angle (tan δ) Measurement frequency : 120Hz, at 20˚C 400 0.25 Rated voltage (V) Z– 25˚C / Z+20˚C Z– 40˚C / Z+20˚C Stability at Low Temperature Impedance ratio (MAX.) 400 6 10 Measurement frequency : 120Hz Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 2000 hours at 105°C, the peak voltage shall not exceed the rated voltage. Shelf Life After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on dark brown sleeve. 8 1 (mm) 10 8 3.5 105.0 P φd 3.50.6 5.00.6 φd 0.6 0.6 (L =11.5) 1.5 12.5) (L (L =11.5) 1.52.0 (L 12.5) 2.0 2 3 4 5 6 17 28 3 9 410 511 6 L+ P 0.5 P 0.5 P±0.5 + 15MIN L MAX MAX 15MIN (mm) φD 8 10 P 3.5 5.0 φd 0.6 0.6 MAX 8 9 10 11 Configu Configuration Configuration Capacitance toleran Capacitance tolerance (20%) Capacitance tolerance (±20%) Rated capacitan Rated capacitance (15F) Rated capacitance (15µF) Rated voltage (400V) Rated voltag Rated voltage (400V) Seri Series name Series name Type Type Pressure relief vent L+ 7 9M 102P11 GD 1 5 0 M P D U2 V3 C4 25 G6 17U58V0 C UVC 2 G 1 5 0 MPD 1 φD+0.5MAX (mm) φD φD P φd Sleeve (P.E.T.) φd φd φD+0.5MAX φD+0.5MAX Pressure relief vent Pressure relief vent Within ±25% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Type numbering system (Example : 400V 15µF) Radial Lead Type Sleeve (P.E.T.) Sleeve (P.E.T.) Capacitance change tan δ Leakage current 4MIN 15MIN 4MIN 4MIN Configuration Configuration Pb-free leadwire Configuration Pb-free leadwire φD φD Pb-free PET sleeve Pb-free PET sleeve Pb-free leadwire φ 8D· 10 8 · 10 PD Pb-free PETPD sleeve (L =11.5) 1.5 (L 12.5) 2.0 8 · 10 PD Please refer to the Guidelines for Aluminum Electrolytic Capacitors for end seal configuration information. Frequency coefficient of rated ripple current Cap.(µF) Frequency 4.7 to 8.2 10 to 18 50Hz 0.65 0.80 120Hz 1.00 1.00 500Hz 1.20 1.20 1 kHz 1.30 1.30 10kHz or more 1.50 1.50 Dimension table in next page. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UVC ■ Dimensions Rated Voltage （V） （code） Rated Capacitance （µF） 4.7 400 （2G） Case Size φD×L（mm） tan δ 8× 11.5 0.25 Leakage Current （µA） at 20℃ after 1 minute Rated Ripple （mArms） （105℃/120Hz） Part Number 175.2 70 UVC2G4R7MPD （ ） 5.6 8× 11.5 0.25 189.6 70 UVC2G5R6MPD 8.2 8× 16 0.25 231.2 85 UVC2G8R2MPD 10 10×12.5 0.25 260 100 UVC2G100MPD 12 8× 20 0.25 292 120 UVC2G120MPD 15 10× 16 0.25 340 150 UVC2G150MPD 18 10× 20 0.25 388 200 UVC2G180MPD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. uration nce (20%) nce (15F) ge (400V) ies name Type CAT.8100K