UVK1H221MPD

ALUMINUM  ELECTROLYTIC  CAPACITORS UVK Miniature Sized UVY High Temperature One rank smaller case sizes than UVR. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). UVK Valued marked with an ※ in the dimension table are scheduled to be discontinued and are not recommended for new designs. Smaller UVR Specifications Item Performance Characteristics Category Temperature Range –40 to +85˚C (6.3V to 400V), –25˚C to +85˚C (450V) Rated Voltage Range 6.3 to 450V Rated Capacitance Range 0.47 to 33000µF Capacitance Tolerance ± 20% at 120Hz, 20˚C Rated voltage (V) Leakage Current ※ 6.3 to 100V After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.03CV or 4 (µA), whichever is greater. 160 to 450V After 1 minute's application of rated voltage at 20°C, CV 1000 : I = 0.04CV+100 (µA) or less After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV or 3 (µA), whichever is greater. Tangent of loss angle (tan δ) Measurement frequency : 120Hz at 20˚C For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Rated voltage (V) 6.3 10 16 25 35 0.28 0.24 0.20 0.16 0.14 tan δ (max.) 50 0.12 63 0.10 100 0.08 160 to 250 350 to 450 0.20 0.25 Measurement frequency : 120Hz Stability at Low Temperature Rated voltage (V) Impedance ratio Z(–25˚C) / Z(+20˚C) (max.) Z(–40˚C) / Z(+20˚C) 6.3 5 12 35 2 4 25 2 5 16 3 8 10 4 10 50 to 100 160 to 200 250 to 350 2 3 4 3 4 8 400 6 10 450 15 Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 85°C. Shelf Life After storing the capacitors under no load at 85˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on black sleeve. Capacitance change tan δ Leakage current ※ I : Leakage Current (μA), C : Rated Capacitance (μF), V : Rated Voltage (V) Type numbering system (Example : 10V 330µF) Radial Lead Type ) (PET) Sleeve (PET Sleeve 1 φd φd 2 3 1 24 35 46 57 8 6 79 810 11 9 10 11 Configuration Configuration P±0.5 P±0.5 φD+ max. φD+ max. U VU K V 1 KA 13 A3 3 1 3 M 1E M DED Capacitance tolerance Capacitance tolerance (±20%) (±20%) Rated capacitance Rated capacitance (330µF)(330µF) Rated voltage Rated voltage (10V) (10V) Pressure Pressure relief vent relief vent (φ6.3up) (φ6.3up)L ± L± 15min. 15min. 4min. Series name Series name 4min. (mm) P 5φD 2.0P 6.35 2.0 2.5 86.3 2.5 3.5 φd φd 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.5 0.5 φD 0.5 10 108 12.5 3.5 5.0 5.0 5.0 0.6 0.6 0.6 0.6 0.5 0.5 0.5 0.5 12.5 18 16 20 18 22 20 16 5.0 7.5 7.5 10.0 7.5 10.0 10.0 7.5 0.6 0.8 0.8 1.0 0.8 1.0 1.0 0.8 0.5 0.5 0.5 0.5 0.5 1.0 0.5 0.5 22 25 10.0 12.5 1.0 1.0 1.0 1.0 Type (mm) 25 Configuration Configuration 12.5 1.0 φD 1.0 5 Pb-free leadwire leadwire φ DPb-free Pb-free PET sleeve Pb-free PET sleeve 5 6.3 6.3 8 · 10 8 · 10 12.5 to 18 12.5 to 18 (L 20) 1.5 (L 20) 1.5 (L 20) 2.0 (L 20) 2.0 20 to 2520 to 25 DD DD ED PD HD RD ED PD HD RD  lease refer to the Guidelines for Aluminum Electrolytic Capacitors P for end seal configuration information. Frequency coefficient of rated ripple current V 6.3 to 100 160 to 450 Cap.(μF) Frequency 2.2 to 68000 100 to 47000 1000 to 33000 0.47 to 22000 330 to 10000 50Hz 0.75 0.80 0.85 0.80 0.90 120Hz 1.00 1.00 1.00 1.00 1.00 300Hz 1.35 1.23 1.10 1.25 1.10 1 kHz 1.57 1.34 1.13 1.40 1.13 10kHz or more 2.00 1.50 1.15 1.60 1.15 Dimension table in next page. CAT.8100L Type ALUMINUM  ELECTROLYTIC  CAPACITORS UVK ■ Dimensions Rated Voltage （V） （code） Rated Capacitance （µF） 1000 6.3 （0J） 16 （1C） 25 （1E） 8× 11.5 Leakage Current （µA） at 20℃ after at 20℃ after 1 minute 2 minutes Rated Ripple （mArms） （85℃/120Hz） Part Number 0.28 189 63 540 　UVK0J102MPD 10 ×16 0.30 415.8 138.6 890 　UVK0J222MPD 3300 10×20 0.32 623.7 207.9 1190 　UVK0J332MPD 4700 12.5× 20 0.34 888.3 296.1 1550 　UVK0J472MHD 6800 12.5× 25 0.38 1285.2 428.4 1920 　UVK0J682MHD 10000 16 ×25 0.46 1890 630 2350 　UVK0J103MHD 15000 16 ×30.5 0.56 2835 945 2550 　UVK0J153MHD 22000 18 ×35.5 0.70 4158 1386 3200 　UVK0J223MHD 33000 20×40 0.92 6237 2079 3500 ※UVK0J333MRD 220 5×11 0.24 66 22 220 ※UVK1A221MDD 330 6.3×11 0.24 99 33 290 ※UVK1A331MED 470 6.3×11 0.24 141 47 350 ※UVK1A471MED 10×12.5 0.24 300 100 650 　UVK1A102MPD 2200 10 ×16 0.26 660 220 990 　UVK1A222MPD 3300 12.5× 20 0.28 990 330 1450 　UVK1A332MHD 4700 12.5× 25 0.30 1410 470 1800 　UVK1A472MHD 6800 16 ×25 0.34 2040 680 2250 　UVK1A682MHD 10000 16 ×30.5 0.42 3000 1000 2550 　UVK1A103MHD 15000 16 ×35.5 0.52 4500 1500 2880 　UVK1A153MHD 22000 18×40 0.66 6600 2200 3400 　UVK1A223MHD 33000 22×50 0.88 9900 3300 4500 ※UVK1A333MRD 220 6.3× 11 0.20 105.6 35.2 260 ※UVK1C221MED 330 6.3× 11 0.20 158.4 52.8 320 ※UVK1C331MED 75.2 440 　UVK1C471MPD 470 8×11.5 0.20 225.6 1000 10× 12.5 0.20 480 160 700 　UVK1C102MPD 2200 10× 20 0.22 1056 352 1000 　UVK1C222MPD 3300 12.5×25 0.24 1584 528 1700 　UVK1C332MHD 4700 16× 25 0.26 2256 752 2100 　UVK1C472MHD 6800 16× 25 0.30 3264 1088 2250 　UVK1C682MHD 10000 16 ×35.5 0.38 4800 1600 2710 　UVK1C103MHD 15000 18 ×40 0.48 7200 2400 3100 　UVK1C153MHD 22000 22 ×40 0.62 10560 3520 3800 ※UVK1C223MRD 33000 25 ×50 0.84 15840 5280 4800 ※UVK1C333MRD 100 5×11 0.16 75 25 180 ※UVK1E101MDD 220 6.3×11 0.16 165 55 280 ※UVK1E221MED 330 8×11.5 0.16 247.5 82.5 390 　UVK1E331MPD 470 10×12.5 0.16 352.5 117.5 550 　UVK1E471MPD 1000 10× 16 0.16 750 250 860 　UVK1E102MPD 2200 12.5 ×25 0.18 1650 550 1550 　UVK1E222MHD 3300 16×25 0.20 2475 825 1980 　UVK1E332MHD 4700 16× 25 0.22 3525 1175 2200 　UVK1E472MHD 6800 35 （1V） tan δ 2200 1000 10 （1A） Case Size φD×L（mm） 16× 35.5 0.26 5100 1700 2600 　UVK1E682MHD 10000 18×40 0.34 7500 2500 2800 　UVK1E103MHD 15000 22× 50 0.44 11250 3750 3800 ※UVK1E153MRD 22000 25×50 0.58 16500 5500 4500 ※UVK1E223MRD 47 5× 11 0.14 49.35 16.45 130 ※UVK1V470MDD 68 6.3× 11 0.14 71.4 23.8 160 ※UVK1V680MED 100 6.3 ×11 0.14 35 210 ※UVK1V101MED 105 For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100L ALUMINUM  ELECTROLYTIC  CAPACITORS UVK ■ Dimensions Rated Voltage （V） （code） 35 （1V） 50 （1H） 63 （1J） 100 （2A） Leakage Current （µA） Rated Ripple （mArms） （85℃/120Hz） Part Number 77 350 　UVK1V221MPD 115.5 490 　UVK1V331MPD 650 　UVK1V471MPD 350 1150 　UVK1V102MHD 2310 770 1800 　UVK1V222MHD 0.18 3465 1155 2100 　UVK1V332MHD 0.20 4935 1645 2500 　UVK1V472MHD 18× 40 0.24 7140 2380 2800 　UVK1V682MHD 10000 22× 50 0.32 10500 3500 3700 ※UVK1V103MRD 15000 25×50 0.42 15750 5250 4300 ※UVK1V153MRD 2.2 5× 11 0.12 4 3 28 ※UVK1H2R2MDD 3.3 5× 11 0.12 4.95 3 35 ※UVK1H3R3MDD 4.7 5× 11 0.12 7.05 3 40 ※UVK1H4R7MDD 10 5×11 0.12 15 5 60 ※UVK1H100MDD 22 5× 11 0.12 33 11 95 ※UVK1H220MDD 33 5×11 0.12 49.5 16.5 125 ※UVK1H330MDD 47 6.3× 11 0.12 70.5 23.5 155 ※UVK1H470MED 68 6.3× 11 0.12 102 34 210 ※UVK1H680MED Rated Capacitance （µF） Case Size φD×L（mm） tan δ 220 8× 11.5 0.14 231 330 10× 12.5 0.14 346.5 470 10× 16 0.14 493.5 164.5 1000 12.5× 20 0.14 1050 2200 16× 25 0.16 3300 16× 30.5 4700 16× 35.5 6800 at 20℃ after at 20℃ after 1 minute 2 minutes 100 8× 11.5 0.12 150 50 260 　UVK1H101MPD 220 10× 12.5 0.12 330 110 430 　UVK1H221MPD 330 10× 16 0.12 495 165 590 　UVK1H331MPD 470 10× 20 0.12 705 235 760 　UVK1H471MPD 1000 12.5× 25 0.12 1500 500 1350 　UVK1H102MHD 2200 16× 30.5 0.14 3300 1100 1980 　UVK1H222MHD 3300 18× 35.5 0.16 4950 1650 2500 　UVK1H332MHD 4700 20× 40 0.18 7050 2350 2900 ※UVK1H472MRD 6800 22× 50 0.22 10200 3400 3500 ※UVK1H682MRD 10000 25× 50 0.30 15000 5000 4000 ※UVK1H103MRD 22 5× 11 0.10 41.58 13.86 100 ※UVK1J220MDD 33 6.3× 11 0.10 62.37 20.79 140 ※UVK1J330MED 47 6.3× 11 0.10 88.83 29.61 170 ※UVK1J470MED 68 8×11.5 0.10 128.52 42.84 220 　UVK1J680MPD 100 8× 11.5 0.10 189 63 280 　UVK1J101MPD 10× 16 0.10 415.8 138.6 490 　UVK1J221MPD 330 10×20 0.10 623.7 207.9 710 　UVK1J331MPD 470 12.5× 20 0.10 888.3 296.1 900 　UVK1J471MHD 1000 16×25 0.10 1890 630 1300 　UVK1J102MHD 2200 18× 35.5 0.12 4158 1386 2300 　UVK1J222MHD 3300 20× 40 0.14 6237 2079 2700 ※UVK1J332MRD 4700 22× 50 0.16 8883 2961 3400 ※UVK1J472MRD 6800 25× 50 0.20 12852 4284 3900 ※UVK1J682MRD 220 2.2 5× 11 0.08 6.6 3 30 ※UVK2A2R2MDD 3.3 5× 11 0.08 9.9 3.3 40 ※UVK2A3R3MDD 4.7 5× 11 0.08 14.1 4.7 45 ※UVK2A4R7MDD 10 5× 11 0.08 30 10 70 ※UVK2A100MDD 22 6.3× 11 0.08 66 22 130 ※UVK2A220MED 33 8× 11.5 0.08 99 33 180 　UVK2A330MPD 47 8× 11.5 0.08 141 47 200 　UVK2A470MPD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100L ALUMINUM  ELECTROLYTIC  CAPACITORS UVK ■ Dimensions Rated Voltage （V） （code） 100 （2A） 160 （2C） Rated Capacitance （µF） Case Size φD×L（mm） tan δ 68 250 （2E） Part Number 　UVK2A680MPD 10× 12.5 0.08 204 68 270 10× 16 0.08 300 100 340 　UVK2A101MPD 220 12.5×20 0.08 660 220 550 　UVK2A221MHD 330 12.5× 25 0.08 990 330 760 　UVK2A331MHD 470 16 ×25 0.08 1410 470 1000 　UVK2A471MHD 1000 18×35.5 0.08 3000 1000 1350 　UVK2A102MHD 2200 22× 50 0.10 6600 2200 2400 ※UVK2A222MRD 3300 25× 50 0.12 9900 3300 2900 ※UVK2A332MRD 10 8× 11.5 0.20 164 － 80 　UVK2C100MPD 22 10×12.5 0.20 240.8 － 130 　UVK2C220MPD 33 10 ×16 0.20 311.2 － 180 　UVK2C330MPD 47 10 ×20 0.20 400.8 － 210 　UVK2C470MPD 68 12.5×20 0.20 535.2 － 350 　UVK2C680MHD 100 12.5 ×25 0.20 740 － 430 　UVK2C101MHD 220 16×30.5 0.20 1508 － 580 　UVK2C221MHD 330 18×35.5 0.20 2212 － 800 　UVK2C331MHD 470 18×40 0.20 3108 － 1200 　UVK2C471MHD 1000 25× 50 0.20 6500 － 1900 ※UVK2C102MRD 0.47 6.3× 11 0.20 49.4 － 15 ※UVK2DR47MED 1 6.3× 11 0.20 60 － 22 ※UVK2D010MED 2.2 6.3× 11 0.20 84 － 33 ※UVK2D2R2MED 3.3 6.3× 11 0.20 106 － 40 ※UVK2D3R3MED 4.7 6.3× 11 0.20 134 － 50 ※UVK2D4R7MED 0.20 180 － 80 　UVK2D100MPD 8×11.5 22 10×16 0.20 276 － 150 　UVK2D220MPD 33 10 ×20 0.20 364 － 200 　UVK2D330MPD 47 12.5×20 0.20 476 － 270 　UVK2D470MHD 68 12.5×25 0.20 644 － 350 　UVK2D680MHD 100 16× 25 0.20 900 － 450 　UVK2D101MHD 220 16×35.5 0.20 1860 － 700 　UVK2D221MHD 330 18×40 0.20 2740 － 950 　UVK2D331MHD 470 22×40 0.20 3860 － 1300 ※UVK2D471MRD 3.3 6.3× 11 0.20 122.5 － 40 ※UVK2E3R3MED 4.7 6.3× 11 0.20 147 － 50 ※UVK2E4R7MED 10 10 ×12.5 0.20 200 － 100 　UVK2E100MPD 22 10× 20 0.20 320 － 150 　UVK2E220MPD 33 10× 20 0.20 430 － 200 　UVK2E330MPD 47 12.5× 20 0.20 570 － 270 　UVK2E470MHD 68 16× 25 0.20 780 － 380 　UVK2E680MHD 100 16 ×25 0.20 1100 － 440 　UVK2E101MHD 220 18 ×35.5 0.20 2300 － 680 　UVK2E221MHD 330 20× 40 0.20 3400 － 1000 ※UVK2E331MRD 470 22×50 0.20 4800 － 1400 ※UVK2E471MRD 6.3×11 0.25 117 － 30 ※UVK2V2R2MED 2.2 350 （2V） at 20℃ after at 20℃ after 1 minute 2 minutes Rated Ripple （mArms） （85℃/120Hz） 100 10 200 （2D） Leakage Current （µA） 3.3 8 ×11.5 0.25 146.2 － 43 　UVK2V3R3MPD 4.7 8× 11.5 0.25 165.8 － 55 　UVK2V4R7MPD 10× 12.5 0.25 240 － 90 　UVK2V100MPD 0.25 408 － 150 　UVK2V220MHD 10 22 12.5× 20 For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100L ALUMINUM  ELECTROLYTIC  CAPACITORS UVK ■ Dimensions Rated Voltage （V） （code） 350 （2V） Rated Capacitance （µF） 450 （2W） Rated Ripple （mArms） （85℃/120Hz） Part Number － 240 　UVK2V330MHD － 300 　UVK2V470MHD 1052 － 400 　UVK2V680MHD 0.25 1500 － 520 　UVK2V101MHD 0.25 3180 － 760 ※UVK2V221MRD 4720 tan δ 33 12.5×25 0.25 562 47 16× 25 0.25 758 68 16× 25 0.25 100 18×35.5 220 22×50 330 400 （2G） Leakage Current （µA） Case Size φD×L（mm） at 20℃ after at 20℃ after 1 minute 2 minutes 25×50 0.25 － 1000 ※UVK2V331MRD 0.47 6.3×11 0.25 58.8 － 12 ※UVK2GR47MED 1 6.3× 11 0.25 80 － 20 ※UVK2G010MED 2.2 8×11.5 0.25 128 － 38 　UVK2G2R2MPD 3.3 8×11.5 0.25 152.8 － 48 　UVK2G3R3MPD 4.7 10 ×12.5 0.25 175.2 － 60 　UVK2G4R7MPD 10 10 ×16 0.25 260 － 90 　UVK2G100MPD 22 12.5× 25 0.25 452 － 200 　UVK2G220MHD 33 16 ×25 0.25 628 － 240 　UVK2G330MHD 47 16 ×25 0.25 852 － 280 　UVK2G470MHD 68 16 ×30.5 0.25 1188 － 340 　UVK2G680MHD 100 18× 35.5 0.25 1700 － 440 　UVK2G101MHD 220 22× 50 0.25 3620 － 650 ※UVK2G221MRD 2.2 8×11.5 0.25 139 － 28 　UVK2W2R2MPD 3.3 10 ×12.5 0.25 159.4 － 40 　UVK2W3R3MPD 4.7 10× 12.5 0.25 184.6 － 46 　UVK2W4R7MPD 10 10× 20 0.25 280 － 80 　UVK2W100MPD 22 12.5 ×25 0.25 496 － 140 　UVK2W220MHD 33 16× 25 0.25 694 － 180 　UVK2W330MHD 47 16× 30.5 0.25 946 － 220 　UVK2W470MHD 68 18× 35.5 0.25 1324 － 260 　UVK2W680MHD 100 18 ×40 0.25 1900 － 280 　UVK2W101MHD 220 25 ×50 0.25 4060 － 350 ※UVK2W221MRD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100L