UVR2D4R7MPD1TD

ALUMINUM  ELECTROLYTIC  CAPACITORS VR Miniature Sized series VZ High Temperature One rank smaller case sizes than VX series. Compliant to the RoHS directive (2011/65/EU). VR Smaller VK Specifications Item Performance Characteristics Category Temperature Range –40 to +85˚C (6.3V to 400V), –25 to +85˚C (450V) Rated Voltage Range 6.3 to 450V Rated Capacitance Range 0.1 to 33000µF Capacitance Tolerance ± 20% at 120Hz, 20˚C Rated voltage (V) Leakage Current Tangent of loss angle (tan δ) 6.3 to 100V After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.03CV or 4 (µA), whichever is greater. 160 to 450V After 1 minute's application of rated voltage at 20°C, < CV = 1000 :1= 0.1CV+40µA or less After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV or 3 (µA), whichever is greater. After 1 minute's application of rated voltage at 20°C, CV > 1000 :1= 0.04CV+100 (µA) or less Measurement frequency : 120Hz at 20˚C For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Rated voltage (V) 35 6.3 10 16 25 tan δ (MAX.) 0.14 0.28 0.24 0.20 0.16 50 0.12 63 0.10 100 0.08 160 to 315 350 to 450 0.20 0.25 Measurement frequency : 120Hz Stability at Low Temperature Rated voltage (V) Impedance ratio Z– 25˚C / Z+20˚C ZT / Z20 (MAX.) Z– 40˚C / Z+20˚C 6.3 5 12 10 4 10 16 3 8 35 2 4 25 2 5 50 2 3 63 2 3 100 2 3 160 to 200 250 to 350 3 4 4 8 400 6 10 450 15 Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 85°C. Shelf Life After storing the capacitors under no load at 85˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on black sleeve. Radial Lead Type Type numbering system (Example : 10V 330μF) Sleeve (P.E.T.) Sleeve (P.E.T.) 1 φd φd 3 4 5 6 7 8 9 10 11 12 P±0.5 P±0.5 (φ6.3up) 4 2 U2 V3 R4 15 A 6 37 38 1 9 M10 E11D12 UVR 1 A 3 3 1 MED 1 φD+ MAX φD+ MAX Pressure relief vent Pressure (φ6.3up) relief vent L+ L+ MAX MAX 15MIN 15MIN 5 4MIN 4MIN (mm) 6.3 8 10 12.5 16 18 20 22 (mm) 25 φD 4 5 6.3 8 10 12.5 16 18 4 1.5 5 2.0 6.32.5 8 3.5 105.0 12.5 5.0 167.5 187.5 2010.0 2210.0 2512.5 P 1.5 2.0 2.5 3.5 5.0 5.0 7.5 7.5 P φd 1.5 0.45 2.00.5 2.50.5 3.50.6 5.00.6 5.00.6 7.50.8 7.50.8 10.0 1.0 10.0 1.0 12.5 1.0 φd 0.45 0.5 0.5 0.6 0.6 0.6 0.8 0.8 φd 0.45 0.5 0.50.5 0.50.5 0.60.5 0.60.5 0.60.5 0.80.5 0.80.5 1.00.5 1.01.0 1.01.0 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 1.0 1.0 φD φD P Capacitance change tan δ Leakage current (L 20) 1.5 (L (L20)20) 1.52.0 (L 20) 2.0 (mm) 20 22 25 10.0 10.0 12.5 1.0 1.0 1.0 0.5 1.0 1.0 (L 20) 1.5 (L 20) 2.0 • Please refer to page 20 about the end seal configuration. Size code Size code Configuration Configuration Capacitance tolerance (±20%) Capacitance tolerance (±20%) Rated capacitance (330µF) Rated capacitance (330µF) Rated voltage (10V) Rated voltage (10V) Series name Series name Type Type Configuration Configuration Pb-free leadwire φD Pb-free PET sleeve Pb-free leadwire φ D4 DD6 Pb-free PET sleeve 4 5 5 6.3 6.3 8 · 10 812.5 · 10to 18 12.520toto1825 20 to 25 DD6 DD DDED EDPD PDHD HDRD RD Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. CAT.8100D ALUMINUM ELECTROLYTIC CAPACITORS VR series Dimensions Cap.(μF) 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 2200 V Code 6.3 10 16 25 35 50 63 100 0J 1A 1C 1E 1V 1H 1J 2A 0R1 R22 R33 R47 010 2R2 3R3 4R7 100 5 × 11 65 220 5 × 11 80 330 5 × 11 95 470 5 × 11 135 101 5 × 11 200 221 270 331 6.3 × 11 320 471 6.3 × 11 8 × 11.5 540 102 222 10 × 20 1000 332 3300 5 × 11 65 5 × 11 85 5 × 11 100 5 × 11 145 6.3 × 11 240 6.3 × 11 290 6.3 × 11 350 10 × 12.5 650 10 × 20 1100 1300 1700 2100 1450 1550 12.5 × 25 1800 16 × 25 2250 4700 472 6800 682 12.5 × 25 1920 16 × 25 2350 16 × 35.5 2700 103 16 × 25 15000 153 16 × 35.5 2850 22000 223 333 18 × 40 22 × 30 22 × 50 25 × 40 V Code 3350 3200 3900 3800 18 × 35.5 3100 20 × 40 3700 25 × 30 3300 22 × 50 4500 25 × 40 4800 50 75 90 110 160 260 370 440 790 12.5 × 20 1190 12.5 × 20 Cap.(μF) 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 6.3 × 11 8 × 11.5 8 × 11.5 10 × 16 10 × 20 12.5 × 20 33000 12.5 × 25 10000 1.3 5 × 11 2.9 5 × 11 4.3 5 × 11 6.2 5 × 11 5 × 11 17 28 5 × 11 35 5 × 11 40 5 × 11 65 6.3 × 11 60 5 × 11 100 6.3 × 11 95 5 × 11 140 8 × 11.5 125 6.3 × 11 170 10 × 12.5 155 6.3 × 11 10 × 12.5 300 10 × 20 260 430 10 × 16 490 12.5 × 25 590 10 × 20 710 12.5 × 25 760 12.5 × 20 900 16 × 25 1350 16 × 25 1300 18 × 40 22 × 50 18 × 35.5 2300 2100 25 × 40 18 × 35.5 2500 20 × 40 2700 16 × 25 1980 16 × 35.5 2280 25 × 50 25 × 30 2600 22 × 30 2450 18 × 35.5 20 × 40 2900 22 × 50 3400 16 × 31.5 2450 2700 20 × 31 25 × 40 3200 25 × 30 2900 18 × 35.5 2900 20 × 40 3000 22 × 50 3500 25 × 50 3900 20 × 31 2700 25 × 30 2900 25 × 40 3300 20 × 40 3000 22 × 50 3700 25 × 50 4000 25 × 30 2900 25 × 40 3600 22 × 50 3800 25 × 50 4300 25 × 40 3600 25 × 50 4500 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 5 × 11 35 5 × 11 40 5 × 11 5 × 11 55 5 × 11 60 5 × 11 5 × 11 5 × 11 80 5 × 11 90 5 × 11 5 × 11 95 5 × 11 105 5 × 11 5 × 11 115 5 × 11 130 6.3 × 11 6.3 × 11 190 6.3 × 11 210 8 × 11.5 8 × 11.5 330 10 × 12.5 385 10 × 12.5 10 × 12.5 440 10 × 12.5 490 10 × 16 0 × 12.5 550 10 × 16 1 650 12.5 × 20 10 × 20 960 12.5 × 20 1150 12.5 × 25 12.5 × 25 1550 16 × 25 1800 16 × 35.5 16 × 35.5 2650 18 × 35.5 20 × 31 20 × 40 25 × 30 22 × 50 25 × 40 2950 3000 3400 3300 4200 4000 25 × 50 4800 200 250 315 350 400 450 2C 2D 2E 2F 2V 2G 2W 0.47 1 2.2 3.3 4.7 10 22 33 R47 6.3 × 11 010 6.3 × 11 2R2 6.3 × 11 3R3 6.3 × 11 4R7 6.3 × 11 100 8 × 11.5 220 10 × 16 330 10 × 20 15 6.3 × 11 22 6.3 × 11 33 6.3 × 11 40 6.3 × 11 50 8 × 11.5 80 10 × 12.5 155 10 × 20 205 12.5 × 20 15 6.3 × 11 15 22 6.3 × 11 22 6.3 × 11 33 6.3 × 11 33 8 × 11.5 40 8 × 11.5 46 10 × 12.5 55 8 × 11.5 55 10 × 12.5 95 10 × 16 105 10 × 20 170 12.5 × 20 190 12.5 × 20 230 12.5 × 20 230 16 × 25 47 470 12.5 × 20 270 12.5 × 20 270 12.5 × 25 300 16 × 25 340 100 101 12.5 × 25 430 16 × 31.5 530 16 × 31.5 520 560 220 221 16 × 35.5 800 18 × 35.5 330 331 740 820 1170 970 470 25 × 50 1600 1000 940 900 1410 1290 1900 20 × 40 22 × 30 22 × 50 25 × 30 18 × 40 22 × 30 22 × 40 25 × 30 25 × 50 1130 1090 1490 1550 471 102 20 × 40 25 × 30 22 × 50 25 × 40 2900 Case size Rated φ D × L (mm) ripple 160 810 2.1 4.7 7 10 21 30 40 45 75 130 180 230 370 620 760 1000 1380 2400 2400 18 × 35.5 22 × 50 25 × 30 25 × 50 22 6.3 × 11 22 33 38 8 × 11.5 55 10 × 12.5 55 65 10 × 12.5 65 115 10 × 20 115 190 12.5 × 25 200 275 16 × 25 275 16 × 35.5 380 850 770 1250 18 × 40 22 × 30 22 × 50 25 × 40 590 570 850 890 25 8 × 11.5 8 × 11.5 10 × 12.5 45 10 × 12.5 55 10 × 16 10 × 12.5 70 10 × 20 10 × 16 130 12.5 × 20 12.5 × 20 240 16 × 25 16 × 25 16 × 31.5 300 16 × 35.5 18 × 40 16 × 35.5 370 22 × 30 550 20 × 40 22 × 40 25 × 30 530 25 × 50 750 23 35 45 55 90 165 230 300 290 350 Case size Rated φ D × L (mm) ripple Rated ripple current (mArms) at 85˚C 120Hz Size 4×11 is available for capacitors marked " " In this case, 6 will be put at 12th digit of type numbering system " " Frequency coefficient of rated ripple current V 6.3 to 100 160 to 450 Cap.(μF) Frequency 0.1 to 47000 100 to 47000 1000 to 33000 0.47 to 22000 330 to 10000 50Hz 0.75 0.80 0.85 0.80 0.90 120Hz 1.00 1.00 1.00 1.00 1.00 300Hz 1.35 1.23 1.10 1.25 1.10 1 kHz 10kHz or more 1.57 2.00 1.34 1.50 1.13 1.15 1.40 1.60 1.13 1.15 CAT.8100D