UVR2W220MHD

ALUMINUM  ELECTROLYTIC  CAPACITORS UVR Miniature Sized UVZ High Temperature Standard series for entertainment electronics. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). UVR Smaller UVK Specifications Item Performance Characteristics Category Temperature Range –40 to +85˚C (6.3V to 400V), –25 to +85˚C (450V) Rated Voltage Range 6.3 to 450V Rated Capacitance Range 1 to 22000µF Capacitance Tolerance ± 20% at 120Hz, 20˚C Rated voltage (V) Leakage Current ※ 6.3 to 100V After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.03CV(µA). 160 to 450V After 1 minute's application of rated voltage at 20°C, < CV = 1000 :1= 0.1CV+40µA or less CV > 1000 :1= 0.04CV+100 (µA) or less After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV(µA). Measurement frequency : 120Hz at 20˚C For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Rated voltage (V) 35 6.3 10 16 25 0.14 tan δ (max.) 0.28 0.24 0.20 0.16 Tangent of loss angle (tan δ) 50 0.12 63 0.10 100 0.08 160 to 315 350 to 450 0.20 0.25 Measurement frequency : 120Hz Rated voltage (V) Impedance ratio Z(–25˚C) / Z(+20˚C) (max.) Z(–40˚C) / Z(+20˚C) Stability at Low Temperature 6.3 5 12 10 4 10 16 3 8 35 2 4 25 2 5 50 2 3 63 2 3 100 2 3 160 to 200 250 to 350 3 4 4 8 400 6 10 450 15 Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 85°C. Shelf Life After storing the capacitors under no load at 85˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on black sleeve. Capacitance change tan δ Leakage current ※ I : Leakage Current (μA), C : Rated Capacitance (μF), V : Rated Voltage (V) Type numbering system (Example : 10V 3300µF) Radial Lead Type Sleeve (PET) Sleeve (PET) 1 φd φd 3 4 5 6 7 8 9 10 11 12 P±0.5 P±0.5 φD+0.5max. φD+0.5max. Pressure relief vent Pressure relief vent φD 6.3 φD P 6.32.5 P φd 2.50.5 φd 0.5 2 U2 V3 R4 15 A6 37 38 2 9 M10H11D12 UVR 1 A 3 3 2 MHD 1 8 φD 8 3.5 P 3.50.6 φd 0.6 L± 15min. L± 10 12.5 8 10 12.5 105.0 12.5 5.0 167.5 3.5 5.0 5.0 5.00.6 5.00.6 7.50.8 0.6 0.6 0.6 0.6 0.6 0.8 (L 20) 1.5 (L 20) 1.5 (L 20) 2.0 (L (L20)20) 1.52.0 P  lease refer to (L 20)•2.0 4min. 15min. 4min. (mm) (mm) 16 (mm) 18 Configuration Configuration Pb-free leadwire φD Pb-free PET sleeve Pb-free leadwire φ 8D· 10 Pb-free PETPD sleeve 16 18 187.5 7.5 7.5 7.50.8 0.8 0.8 0.8 812.5 · 10to 18 12.5 to 18 Size code Size code Configuration Configuration Capacitance tolerance (±20%) Capacitance tolerance (±20%) Rated capacitance (3300µF) Rated capacitance (3300µF) Rated voltage (10V) Rated voltage (10V) Series name Series name Type Type PDHD HD the Guidelines for Aluminum Electrolytic Capacitors for end seal configuration information. Frequency coefficient of rated ripple current V 6.3 to 100 160 to 450 Cap.(μF) Frequency 33 to 47000 100 to 47000 1000 to 22000 1 to 22000 330 50Hz 0.75 0.80 0.85 0.80 0.90 120Hz 1.00 1.00 1.00 1.00 1.00 300Hz 1.35 1.23 1.10 1.25 1.10 1 kHz 10kHz or more 1.57 2.00 1.34 1.50 1.13 1.15 1.40 1.60 1.13 1.15 Dimension table in next page. CAT.8100M ALUMINUM ELECTROLYTIC CAPACITORS UVR ■ Dimensions Rated Voltage （V） （code） 6.3 （0J） Case Size φD×L（mm） tan δ 1000 8× 11.5 0.28 189 25 （1E） 35 （1V） Part Number 63 540 　UVR0J102MPD 10× 20 0.30 415.8 138.6 1000 　UVR0J222MPD 3300 10× 20 0.32 623.7 207.9 1190 　UVR0J332MPD 4700 12.5× 20 0.34 888.3 296.1 1550 　UVR0J472MHD 6800 12.5× 25 0.38 1285.2 428.4 1920 　UVR0J682MHD 10000 16× 25 0.46 1890 630 2350 　UVR0J103MHD 15000 16× 35.5 0.56 2835 945 2850 　UVR0J153MHD 22000 18× 40 0.70 4158 1386 3350 　UVR0J223MHD 10× 12.5 0.24 300 100 650 　UVR1A102MPD 2200 10×20 0.26 660 220 1100 　UVR1A222MPD 3300 12.5× 20 0.28 990 330 1450 　UVR1A332MHD 4700 12.5× 25 0.30 1410 470 1800 　UVR1A472MHD 6800 16× 25 0.34 2040 680 2250 　UVR1A682MHD 10000 16× 35.5 0.42 3000 1000 2700 　UVR1A103MHD 15000 18× 35.5 0.52 4500 1500 3100 　UVR1A153MHD 330 8× 11.5 0.20 158.4 370 　UVR1C331MPD 8× 11.5 470 16 （1C） at 20℃ after at 20℃ after 1 minute 2 minutes Rated Ripple （mArms） （85℃/120Hz） 2200 1000 10 （1A） Leakage Current （µA） Rated Capacitance （µF） 52.8 0.20 225.6 440 　UVR1C471MPD 1000 10× 16 0.20 480 160 75.2 790 　UVR1C102MPD 2200 12.5× 20 0.22 1056 352 1300 　UVR1C222MHD 3300 12.5× 25 0.24 1584 528 1700 　UVR1C332MHD 4700 16× 25 0.26 2256 752 2100 　UVR1C472MHD 6800 16× 35.5 0.30 3264 1088 2650 　UVR1C682MHD 10000 18× 35.5 0.38 4800 1600 2950 　UVR1C103MHD 220 8× 11.5 0.16 165 55 330 　UVR1E221MPD 330 10×12.5 0.16 247.5 82.5 440 　UVR1E331MPD 470 10× 12.5 0.16 352.5 117.5 550 　UVR1E471MPD 1000 10×20 0.16 750 250 960 　UVR1E102MPD 2200 12.5× 25 0.18 1650 550 1550 　UVR1E222MHD 3300 16× 25 0.20 2475 825 1980 　UVR1E332MHD 4700 16× 30.5 0.22 3525 1175 2450 　UVR1E472MHD 6800 18× 35.5 0.26 5100 1700 2900 　UVR1E682MHD 220 10×12.5 0.14 231 77 385 　UVR1V221MPD 330 10× 12.5 0.14 346.5 115.5 490 　UVR1V331MPD 470 10× 16 0.14 493.5 164.5 650 　UVR1V471MPD 1000 12.5× 20 0.14 1050 1150 　UVR1V102MHD 2200 16×25 0.16 2310 770 1800 　UVR1V222MHD 3300 16×35.5 0.18 3465 1155 2280 　UVR1V332MHD 4700 18×35.5 0.20 4935 1645 2700 　UVR1V472MHD 350 For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100M ALUMINUM  ELECTROLYTIC  CAPACITORS UVR ■ Dimensions Rated Voltage （V） （code） 50 （1H） 63 （1J） 260 　UVR1H101MPD 330 110 430 　UVR1H221MPD 495 165 590 　UVR1H331MPD 0.12 705 235 760 　UVR1H471MHD 0.12 1500 500 1350 　UVR1H102MHD 0.14 3300 1100 2100 　UVR1H222MHD 8× 11.5 0.12 150 220 10 ×12.5 0.12 330 10 ×16 0.12 470 12.5 ×20 1000 12.5 ×25 at 20℃ after at 20℃ after 1 minute 2 minutes 2200 16×35.5 3300 18 ×35.5 0.16 4950 1650 2500 　UVR1H332MHD 100 10×12.5 0.10 189 63 300 　UVR1J101MPD 220 10 ×16 0.10 415.8 138.6 490 　UVR1J221MPD 330 10× 20 0.10 623.7 207.9 710 　UVR1J331MPD 470 12.5× 20 0.10 888.3 296.1 900 　UVR1J471MHD 1000 16 ×25 0.10 1890 630 1300 　UVR1J102MHD 2200 18 ×35.5 0.12 4158 1386 2300 　UVR1J222MHD 33 8× 11.5 0.08 99 33 180 　UVR2A330MPD 10×12.5 0.08 141 47 230 　UVR2A470MPD 100 10× 20 0.08 300 100 370 　UVR2A101MPD 220 12.5× 25 0.08 660 220 620 　UVR2A221MHD 330 12.5× 25 0.08 990 330 760 　UVR2A331MHD 470 16× 25 0.08 1410 470 1000 　UVR2A471MHD 1000 18×40 0.08 3000 1000 1380 　UVR2A102MHD 0.20 164 － 80 　UVR2C100MPD 10×16 0.20 240.8 － 155 　UVR2C220MPD 33 10×20 0.20 311.2 － 205 　UVR2C330MPD 47 12.5×20 0.20 400.8 － 270 　UVR2C470MHD 100 12.5× 25 8× 11.5 0.20 740 － 430 　UVR2C101MHD 220 16× 35.5 0.20 1508 － 800 　UVR2C221MHD 330 18× 40 0.20 2212 － 940 　UVR2C331MHD 8× 11.5 0.20 134 － 55 　UVR2D4R7MPD 10×12.5 0.20 180 － 95 　UVR2D100MPD 4.7 10 22 10×20 0.20 276 － 170 　UVR2D220MPD 33 12.5×20 0.20 364 － 230 　UVR2D330MHD 47 12.5×20 0.20 476 － 270 　UVR2D470MHD 100 16× 30.5 0.20 900 － 530 　UVR2D101MHD 220 18× 35.5 0.20 1860 － 810 　UVR2D221MHD 8×11.5 0.20 122.5 － 46 　UVR2E3R3MPD 8×11.5 3.3 4.7 250 （2E） 50 100 22 200 （2D） Part Number tan δ 10 160 （2C） Rated Ripple （mArms） （85℃/120Hz） Case Size φD×L（mm） 47 100 （2A） Leakage Current （µA） Rated Capacitance （µF） 0.20 147 － 55 　UVR2E4R7MPD 10 10× 16 0.20 200 － 105 　UVR2E100MPD 22 12.5× 20 0.20 320 － 190 　UVR2E220MHD 33 12.5× 20 0.20 430 － 230 　UVR2E330MHD 47 12.5× 25 0.20 570 － 300 　UVR2E470MHD 0.20 1100 － 520 　UVR2E101MHD 100 16 ×30.5 For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100M ALUMINUM ELECTROLYTIC CAPACITORS UVR ■ Dimensions Rated Voltage （V） （code） 315 （2F） Rated Capacitance （µF） － 33 　UVR2F2R2MPD 141.58 － 55 　UVR2F3R3MPD 159.22 － 65 　UVR2F4R7MPD 0.20 226 － 115 　UVR2F100MPD 12.5× 20 0.20 377.2 － 190 　UVR2F220MHD 16× 25 0.20 515.8 － 275 　UVR2F330MHD 16× 25 0.20 692.2 － 340 　UVR2F470MHD 18× 35.5 0.20 1360 － 560 　UVR2F101MHD 8× 11.5 0.25 117 － 38 　UVR2V2R2MPD 8× 11.5 0.20 109.3 3.3 10× 12.5 0.20 4.7 10× 12.5 0.20 10 10× 20 22 33 47 at 20℃ after at 20℃ after 1 minute 2 minutes 3.3 10× 12.5 0.25 146.2 － 55 　UVR2V3R3MPD 4.7 10× 12.5 0.25 165.8 － 65 　UVR2V4R7MPD 10 10× 20 0.25 240 － 115 　UVR2V100MPD 22 12.5× 25 0.25 408 － 200 　UVR2V220MHD 33 16× 25 0.25 562 － 275 　UVR2V330MHD 47 16× 35.5 0.25 758 － 380 　UVR2V470MHD 18× 40 0.25 1500 － 590 　UVR2V101MHD 100 1 8× 11.5 0.25 80 － 25 　UVR2G010MPD 2.2 10× 12.5 0.25 128 － 45 　UVR2G2R2MPD 3.3 10× 12.5 0.25 152.8 － 55 　UVR2G3R3MPD 10× 16 0.25 175.2 － 70 　UVR2G4R7MPD 10 4.7 12.5× 20 0.25 260 － 130 　UVR2G100MHD 22 16× 25 0.25 452 － 240 　UVR2G220MHD 33 16× 30.5 0.25 628 － 300 　UVR2G330MHD 47 16× 35.5 0.25 852 － 370 　UVR2G470MHD 1 450 （2W） Part Number 2.2 2.2 400 （2G） Rated Ripple （mArms） （85℃/120Hz） tan δ 100 350 （2V） Leakage Current （µA） Case Size φD×L（mm） 8× 11.5 0.25 85 － 23 　UVR2W010MPD 2.2 10× 12.5 0.25 139 － 35 　UVR2W2R2MPD 3.3 10×16 0.25 159.4 － 45 　UVR2W3R3MPD 10× 20 0.25 184.6 － 55 　UVR2W4R7MPD 10 4.7 12.5× 20 0.25 280 － 90 　UVR2W100MHD 22 16× 25 0.25 496 － 165 　UVR2W220MHD 33 16× 35.5 0.25 694 － 230 　UVR2W330MHD 47 18× 40 0.25 946 － 300 　UVR2W470MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100M