UVY1H103MRD

ALUMINUM  ELECTROLYTIC  CAPACITORS UVY Wide Temperature Range UVZ Smaller One rank smaller case sizes than UVZ. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). UVY High Temperature UVK Specifications Item Performance Characteristics Category Temperature Range – 55 to +105˚C (6.3 to 100V), – 40 to +105˚C (160 to 400V), – 25 to +105˚C (450V) Rated Voltage Range 6.3 to 450V Rated Capacitance Range 2.2 to 22000µF Capacitance Tolerance ± 20% at 120Hz, 20˚C Rated voltage (V) Leakage Current ※ 6.3 to 100 After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.03CV(µA). 160 to 450 After 1 minute's application of rated voltage at 20°C, < 1000 : I =0.1CV+40 (µA) or less CV = CV > 1000 : I =0.04CV+100 (µA) or less After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV(µA). Tangent of loss angle (tan δ) For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Rated voltage (V) 10 16 25 35 6.3 tan δ (max.) 0.28 0.24 0.20 0.16 0.14 Measurement frequency : 120Hz at 20˚C 50 0.12 63 0.10 100 0.08 160 to 250 350 to 450 0.20 0.25 Measurement frequency : 120Hz Rated voltage (V) Impedance ratio Z(–25˚C) / Z(+20˚C) (max.) Z(–40˚C) / Z(+20˚C) Stability at Low Temperature 35 to 50 63 to 100 160 to 200 250 to 350 2 2 3 4 3 3 4 8 25 2 4 16 3 6 10 4 8 6.3 5 10 Capacitance change tan δ Leakage current 400 6 10 450 15 Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours (1000 hours for φ8 ) at 105°C. Shelf Life After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on black sleeve. ※ I : Leakage Current (μA), C : Rated Capacitance (μF), V : Rated Voltage (V) Radial Lead Type Type numbering system (Example : 10V 3300µF) Sleeve (PET) φd 1 2 3 4 5 6 7 8 9 10 11 P±0.5 φD+0.5max. UV Y 1 A 3 3 2 MHD Configuration Capacitance tolerance (±20%) Rated capacitance (3300µF) Rated voltage (10V) Pressure relief vent 15min. L± 4min. Series name Type (mm) φD 8 10 12.5 16 18 P 3.5 5.0 5.0 7.5 7.5 φd 0.6 0.6 0.6 0.8 0.8 Configuration φD Pb-free leadwire Pb-free PET sleeve 8 · 10 12.5 to 18 PD HD (L < 20) 1.5 (L 20) 2.0  lease refer to the Guidelines for Aluminum Electrolytic Capacitors P for end seal configuration information. Frequency coefficient of rated ripple current V 6.3 to 100 160 to 450 Cap.(µF) Frequency 33 to 680 100 to 470 1000 to 22000 2.2 to 220 330 to 470 50Hz 0.75 0.80 0.85 0.80 0.90 120Hz 1.00 1.00 1.00 1.00 1.00 300Hz 1.35 1.23 1.10 1.25 1.10 1 kHz 1.57 1.34 1.13 1.40 1.13 10 kHz or more 2.00 1.50 1.15 1.60 1.15 Dimension table in next page. CAT.8100M ALUMINUM ELECTROLYTIC CAPACITORS UVY ■ Dimensions Rated Voltage （V） （code） 6.3 （0J） 10 （1A） 16 （1C） 25 （1E） Rated Ripple （mArms） at 20℃ after at 20℃ after （105℃/120Hz） 1 minute 2 minutes Case Size φD×L（mm） tan δ 1000 8× 11.5 0.28 189 Part Number 63 390 　UVY0J102MPD 2200 10× 16 0.30 415.8 138.6 635 　UVY0J222MPD 3300 10× 20 0.32 623.7 207.9 840 　UVY0J332MPD 4700 12.5× 20 0.34 888.3 296.1 1090 　UVY0J472MHD 6800 12.5× 25 0.38 1285.2 428.4 1350 　UVY0J682MHD 10000 16×25 0.46 1890 630 1650 　UVY0J103MHD 15000 16×30.5 0.56 2835 945 1820 　UVY0J153MHD 22000 18×35.5 0.70 4158 1386 2280 　UVY0J223MHD 1000 10× 12.5 0.24 300 100 460 　UVY1A102MPD 2200 10× 16 0.26 660 220 705 　UVY1A222MPD 3300 12.5× 20 0.28 990 330 1000 　UVY1A332MHD 4700 12.5× 25 0.30 1410 470 1260 　UVY1A472MHD 6800 16× 25 0.34 2040 680 1570 　UVY1A682MHD 10000 16× 30.5 0.42 3000 1000 1820 　UVY1A103MHD 15000 16×35.5 0.52 4500 1500 2050 　UVY1A153MHD 22000 18× 40 0.66 6600 2200 2420 　UVY1A223MHD 315 　UVY1C471MPD 500 　UVY1C102MPD 470 8× 11.5 0.20 225.6 1000 10× 12.5 0.20 480 160 2200 10× 20 0.22 1056 352 710 　UVY1C222MPD 3300 12.5× 25 0.24 1584 528 1170 　UVY1C332MHD 4700 16× 25 0.26 2256 752 1500 　UVY1C472MHD 6800 16× 25 0.30 3264 1088 1600 　UVY1C682MHD 10000 16× 35.5 0.38 4800 1600 1930 　UVY1C103MHD 15000 75.2 18× 40 0.48 7200 2400 2210 　UVY1C153MHD 330 8× 11.5 0.16 247.5 82.5 275 　UVY1E331MPD 470 10× 12.5 0.16 352.5 117.5 380 　UVY1E471MPD 1000 10×16 0.16 750 250 610 　UVY1E102MPD 2200 12.5× 25 0.18 1650 550 1090 　UVY1E222MHD 3300 16× 25 0.20 2475 825 1400 　UVY1E332MHD 4700 16× 25 0.22 3525 1175 1570 　UVY1E472MHD 6800 16× 35.5 0.26 5100 1700 1850 　UVY1E682MHD 10000 220 35 （1V） Leakage Current （µA） Rated Capacitance （µF） 18× 40 8× 11.5 0.34 7500 2500 2000 　UVY1E103MHD 0.14 231 77 250 　UVY1V221MPD 330 10× 12.5 0.14 346.5 115.5 350 　UVY1V331MPD 470 10× 16 0.14 493.5 164.5 460 　UVY1V471MPD 1000 12.5× 20 0.14 1050 350 810 　UVY1V102MHD 2200 16× 25 0.16 2310 770 1260 　UVY1V222MHD 3300 16× 30.5 0.18 3465 1155 1500 　UVY1V332MHD 4700 16× 35.5 0.20 4935 1645 1780 　UVY1V472MHD 6800 18× 40 0.24 7140 2380 2000 　UVY1V682MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100M ALUMINUM  ELECTROLYTIC  CAPACITORS UVY ■ Dimensions Rated Voltage （V） （code） 50 （1H） 63 （1J） 160 （2C） tan δ 100 8× 11.5 0.12 150 50 190 　UVY1H101MPD Part Number 220 10× 12.5 0.12 330 110 300 　UVY1H221MPD 330 10× 16 0.12 495 165 410 　UVY1H331MPD 470 10×20 0.12 705 235 540 　UVY1H471MPD 1000 12.5× 25 0.12 1500 500 950 　UVY1H102MHD 2200 16×30.5 0.14 3300 1100 1410 　UVY1H222MHD 3300 18×35.5 0.16 4950 1650 1770 　UVY1H332MHD 68 8×11.5 0.10 128.52 42.84 155 　UVY1J680MPD 100 8× 11.5 0.10 189 63 200 　UVY1J101MPD 220 10× 16 0.10 415.8 138.6 335 　UVY1J221MPD 330 10× 20 0.10 623.7 207.9 510 　UVY1J331MPD 470 12.5× 20 0.10 888.3 296.1 640 　UVY1J471MHD 1000 16× 25 0.10 1890 630 930 　UVY1J102MHD 2200 18× 35.5 0.12 4158 1386 1650 　UVY1J222MHD 33 8× 11.5 0.08 99 33 130 　UVY2A330MPD 47 8× 11.5 0.08 141 47 140 　UVY2A470MPD 100 10× 12.5 0.08 204 68 190 　UVY2A680MPD 10× 16 0.08 300 100 240 　UVY2A101MPD 220 12.5× 20 0.08 660 220 390 　UVY2A221MHD 330 12.5× 25 0.08 990 330 540 　UVY2A331MHD 470 16× 25 0.08 1410 470 715 　UVY2A471MHD 1000 18× 35.5 0.08 3000 1000 960 　UVY2A102MHD 10 8× 11.5 0.20 164 － 41 　UVY2C100MPD 22 10× 12.5 0.20 240.8 － 92 　UVY2C220MPD 33 10× 16 0.20 311.2 － 125 　UVY2C330MPD 47 10× 20 0.20 400.8 － 150 　UVY2C470MPD 68 12.5× 20 0.20 535.2 － 250 　UVY2C680MHD 100 12.5× 25 0.20 740 － 310 　UVY2C101MHD 0.20 1508 － 410 　UVY2C221MHD 220 16× 30.5 330 18× 35.5 0.20 2212 － 570 　UVY2C331MHD 470 18×40 0.20 3108 － 855 　UVY2C471MHD 0.20 180 － 57 　UVY2D100MPD 0.20 276 － 105 　UVY2D220MPD 10 22 200 （2D） Rated Ripple （mArms） at 20℃ after at 20℃ after （105℃/120Hz） 1 minute 2 minutes Case Size φD×L（mm） 68 100 （2A） Leakage Current （µA） Rated Capacitance （µF） 8× 11.5 10× 16 33 10× 20 0.20 364 － 140 　UVY2D330MPD 47 12.5× 20 0.20 476 － 195 　UVY2D470MHD 68 12.5× 25 0.20 644 － 250 　UVY2D680MHD 100 16× 25 0.20 900 － 320 　UVY2D101MHD 220 16× 35.5 0.20 1860 － 500 　UVY2D221MHD 330 18× 40 0.20 2740 － 675 　UVY2D331MHD For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100M ALUMINUM ELECTROLYTIC CAPACITORS UVY ■ Dimensions Rated Voltage （V） （code） 250 （2E） tan δ 10 10×12.5 0.20 200 － 71 　UVY2E100MPD 22 10× 20 0.20 320 － 105 　UVY2E220MPD 33 10× 20 0.20 430 － 140 　UVY2E330MPD 47 12.5× 20 0.20 570 － 190 　UVY2E470MHD 68 16× 25 0.20 780 － 270 　UVY2E680MHD 16× 25 0.20 1100 － 310 　UVY2E101MHD 220 2300 18× 35.5 0.20 － 485 　UVY2E221MHD 3.3 8× 11.5 0.25 146.2 － 30 　UVY2V3R3MPD 4.7 8× 11.5 0.25 165.8 － 39 　UVY2V4R7MPD 0.25 240 － 64 　UVY2V100MPD 22 12.5× 20 0.25 408 － 105 　UVY2V220MHD 10× 12.5 33 12.5× 25 0.25 562 － 170 　UVY2V330MHD 47 16× 25 0.25 758 － 210 　UVY2V470MHD 68 16× 25 0.25 1052 － 285 　UVY2V680MHD 18× 35.5 0.25 1500 － 370 　UVY2V101MHD 8× 11.5 0.25 128 － 27 　UVY2G2R2MPD 3.3 8× 11.5 0.25 152.8 － 34 　UVY2G3R3MPD 4.7 10× 12.5 0.25 175.2 － 42 　UVY2G4R7MPD 10 10× 16 0.25 260 － 64 　UVY2G100MPD 2.2 450 （2W） Part Number 100 100 400 （2G） Rated Ripple （mArms） at 20℃ after at 20℃ after （105℃/120Hz） 1 minute 2 minutes Case Size φD×L（mm） 10 350 （2V） Leakage Current （µA） Rated Capacitance （µF） 22 12.5× 25 0.25 452 － 140 　UVY2G220MHD 33 16× 25 0.25 628 － 170 　UVY2G330MHD 47 16× 25 0.25 852 － 200 　UVY2G470MHD 68 16× 30.5 0.25 1188 － 240 　UVY2G680MHD 100 18× 35.5 0.25 1700 － 310 　UVY2G101MHD 2.2 8× 11.5 0.25 139 － 20 　UVY2W2R2MPD 3.3 10× 12.5 0.25 159.4 － 28 　UVY2W3R3MPD 4.7 10× 12.5 0.25 184.6 － 32 　UVY2W4R7MPD 10 10× 20 0.25 280 － 56 　UVY2W100MPD 22 12.5×25 0.25 496 － 100 　UVY2W220MHD 33 16× 25 0.25 694 － 125 　UVY2W330MHD 47 16× 30.5 0.25 946 － 155 　UVY2W470MHD 68 18× 35.5 0.25 1324 － 185 　UVY2W680MHD 18× 40 0.25 1900 － 200 　UVY2W101MHD 100 For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100M