UVZ2D221MHD

ALUMINUM ELECTROLYTIC CAPACITORS UVZ Wide Temperature Range (Through 100V only) Wide temperature range and the same size as UVR. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). UPS UPJ UVZ High Rippie Current High Reliability Smaller High Temperature UVY UVR Specifications Item Performance Characteristics Category Temperature Range –55 to +105˚C (6.3 to 100V) , –40 to +105˚C (160 to 400V), –25 to +105˚C (450V) Rated Voltage Range 6.3 to 450V Rated Capacitance Range 0.47 to 33000µF Capacitance Tolerance ± 20% at 120Hz, 20˚C Rated voltage (V) Leakage Current 6.3 to 100 After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.03CV or 4 (µA), whichever is greater. After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV or 3 (µA), whichever is greater. 160 to 450 After 1 minute's application of rated voltage at 20°C, CV < = 1000 : I = 0.1CV+40 (µA) or less CV > 1000 : I = 0.04CV+100 (µA) or less For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. Rated voltage (V) 6.3 10 16 25 35 tan δ (MAX.) 0.28 0.24 0.20 0.16 0.14 Tangent of loss angle (tan δ) Measurement frequency : 120Hz at 20˚C 50 0.12 63 0.10 100 0.08 160 to 315 350 to 450 0.20 0.25 Measurement frequency : 120Hz Rated voltage (V) Impedance ratio Z– 25˚C / Z+20˚C (MAX.) Z– 40˚C / Z+20˚C Stability at Low Temperature 6.3 5 10 10 4 8 16 3 6 25 2 4 35 2 3 50 2 3 63 2 3 100 2 3 160 to 200 250 to 350 3 4 4 8 450 15 — 400 6 10 Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours (1000 hours for φD = 5,6.3 and 8 ) at 105°C. Shelf Life After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on black sleeve. Radial Lead Type Type numbering system (Example : 10V 330µF) Sleeve (P.E.T.) 1 φd 2 3 4 5 6 7 8 9 10 11 UV Z 1 A 3 3 1 MED φD+ P ±0.5 MAX Configuration Capacitance tolerance (±20%) Rated capacitance (330µF) Rated voltage (10V) Series name Pressure relief vent (φ6.3up) L+ 15MIN MAX Type 4MIN Configuration (mm) Pb-free leadwire Pb-free PET sleeve φD 5 6.3 8 10 12.5 16 18 20 22 25 φD P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 10.0 10.0 12.5 5 DD φd 0.5 0.5 0.6 0.6 0.6 0.8 0.8 1.0 1.0 1.0 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 1.0 1.0 6.3 8 · 10 12.5 to 18 20 to 25 ED PD HD RD (L 20) 1.5 (L 20) 2.0 Please refer to the Guidelines for Aluminum Electrolytic Capacitors for end seal configuration information. Frequency coefficient of rated ripple current V 6.3 to 100 160 to 450 Cap. (µF) Frequency 2.2 to 47 100 to 470 1000 to 33000 0.47 to 220 330 to 1000 50Hz 0.75 0.80 0.85 0.80 0.90 120Hz 1.00 1.00 1.00 1.00 1.00 300Hz 1.35 1.23 1.10 1.25 1.10 1 kHz 1.57 1.34 1.13 1.40 1.13 10 kHz or more 2.00 1.50 1.15 1.60 1.15 Dimension table in next page. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UVZ ■ Dimensions Rated Voltage （V） （code） 6.3 （0J） 10 （1A） Rated Capacitance （µF） 25 （1E） Rated Ripple （mArms） at 20℃ after at 20℃ after （105℃/120Hz） 1 minute 2 minutes tan δ 22 5× 11 0.28 4.158 3 45 UVZ0J220MDD 33 5× 11 0.28 6.237 3 55 UVZ0J330MDD 47 5× 11 0.28 8.883 3 65 UVZ0J470MDD 100 5× 11 0.28 18.9 6.3 95 UVZ0J101MDD 220 5× 11 0.28 41.58 13.86 145 UVZ0J221MDD 330 6.3× 11 0.28 62.37 20.79 195 UVZ0J331MED 470 6.3× 11 0.28 88.83 29.61 230 UVZ0J471MED 63 390 UVZ0J102MPD 1000 8× 11.5 0.28 189 Part Number 2200 10× 20 0.30 415.8 138.6 710 UVZ0J222MPD 3300 10× 20 0.32 623.7 207.9 840 UVZ0J332MPD 4700 12.5× 20 0.34 888.3 296.1 1090 UVZ0J472MHD 6800 12.5× 25 0.38 1285.2 428.4 1350 UVZ0J682MHD 10000 16× 25 0.46 1890 630 1650 UVZ0J103MHD 15000 16× 35.5 0.56 2835 945 2010 UVZ0J153MHD 22000 18× 40 0.70 4158 1386 2350 UVZ0J223MHD 33000 22× 50 0.92 6237 2079 2800 UVZ0J333MRD 22 5× 11 0.24 6.6 3 45 UVZ1A220MDD 33 5× 11 0.24 9.9 3.3 58 UVZ1A330MDD 47 5× 11 0.24 14.1 4.7 68 UVZ1A470MDD 100 5× 11 0.24 30 10 105 UVZ1A101MDD 220 6.3× 11 0.24 66 22 175 UVZ1A221MED 330 6.3× 11 0.24 99 33 210 UVZ1A331MED 470 6.3× 11 0.24 141 47 250 UVZ1A471MED 10× 12.5 0.24 300 100 460 UVZ1A102MPD 1000 2200 10× 20 0.26 660 220 760 UVZ1A222MPD 3300 12.5× 20 0.28 990 330 1000 UVZ1A332MHD 4700 12.5× 25 0.30 1410 470 1260 UVZ1A472MHD 6800 16× 25 0.34 2040 680 1570 UVZ1A682MHD 10000 16× 35.5 0.42 3000 1000 1890 UVZ1A103MHD 15000 18× 35.5 0.52 4500 1500 2180 UVZ1A153MHD 22000 20× 40 0.66 6600 2200 2650 UVZ1A223MRD 33000 22× 50 0.88 9900 3300 3250 UVZ1A333MRD 10 5× 11 0.20 4.8 3 35 UVZ1C100MDD 22 5× 11 0.20 10.56 3.52 54 UVZ1C220MDD 33 5× 11 0.20 15.84 5.28 65 UVZ1C330MDD 47 5× 11 0.20 22.56 7.52 79 UVZ1C470MDD 100 5× 11 0.20 48 16 115 UVZ1C101MDD 220 6.3× 11 0.20 105.6 35.2 190 UVZ1C221MED 0.20 158.4 52.8 265 UVZ1C331MPD 330 16 （1C） Leakage Current （µA） Case Size φD×L（mm） 470 1000 8× 11.5 8× 11.5 10× 16 0.20 225.6 0.20 480 75.2 160 315 UVZ1C471MPD 560 UVZ1C102MPD 2200 12.5× 20 0.22 1056 352 920 UVZ1C222MHD 3300 12.5× 25 0.24 1584 528 1170 UVZ1C332MHD 4700 16×25 0.26 2256 752 1480 UVZ1C472MHD 6800 16× 35.5 0.30 3264 1088 1780 UVZ1C682MHD 10000 18×35.5 0.38 4800 1600 2060 UVZ1C103MHD 15000 20× 40 0.48 7200 2400 2430 UVZ1C153MRD 22000 22×50 0.62 10560 3520 3000 UVZ1C223MRD 33000 25×50 0.84 15840 5280 3450 UVZ1C333MRD 5 ×11 0.16 4 3 25 UVZ1E4R7MDD 10 5 ×11 0.16 7.5 3 36 UVZ1E100MDD 22 5 ×11 0.16 16.5 5.5 58 UVZ1E220MDD 4.7 For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UVZ ■ Dimensions Rated Voltage （V） （code） 25 （1E） Rated Capacitance （µF） 50 （1H） 63 （1J） Rated Ripple （mArms） at 20℃ after at 20℃ after （105℃/120Hz） 1 minute 2 minutes tan δ 33 5×11 0.16 24.75 8.25 68 UVZ1E330MDD 47 5× 11 0.16 35.25 11.75 83 UVZ1E470MDD 100 6.3×11 0.16 75 25 140 UVZ1E101MED Part Number 220 8×11.5 0.16 165 55 240 UVZ1E221MPD 330 10 ×12.5 0.16 247.5 82.5 315 UVZ1E331MPD 470 10× 12.5 0.16 352.5 117.5 380 UVZ1E471MPD 1000 10 ×20 0.16 750 250 680 UVZ1E102MPD 2200 12.5×25 0.18 1650 550 1090 UVZ1E222MHD 3300 16 ×25 0.20 2475 825 1400 UVZ1E332MHD 4700 16 ×31.5 0.22 3525 1175 1710 UVZ1E472MHD 6800 18 ×35.5 0.26 5100 1700 2040 UVZ1E682MHD 10000 20× 40 0.34 7500 2500 2150 UVZ1E103MRD 15000 22× 50 0.44 11250 3750 2750 UVZ1E153MRD 22000 25× 50 0.58 16500 5500 3250 UVZ1E223MRD 5× 11 0.14 3 28 UVZ1V4R7MDD 10 5×11 0.14 10.5 3.5 41 UVZ1V100MDD 22 5× 11 0.14 23.1 7.7 61 UVZ1V220MDD 33 5× 11 0.14 34.65 11.55 75 UVZ1V330MDD 47 5× 11 0.14 49.35 16.45 93 UVZ1V470MDD 100 6.3×11 0.14 105 35 150 UVZ1V101MED 220 10 ×12.5 0.14 231 77 275 UVZ1V221MPD 330 10 ×12.5 0.14 346.5 115.5 350 UVZ1V331MPD 470 10× 16 0.14 493.5 164.5 460 UVZ1V471MPD 1000 12.5×20 0.14 1050 350 810 UVZ1V102MHD 2200 16 ×25 0.16 2310 770 1260 UVZ1V222MHD 3300 16 ×35.5 0.18 3465 1155 1610 UVZ1V332MHD 4700 18 ×35.5 0.20 4935 1645 1910 UVZ1V472MHD 6800 20 ×40 0.24 7140 2380 2150 UVZ1V682MRD 10000 22× 50 0.32 10500 3500 2650 UVZ1V103MRD 15000 25×50 0.42 15750 5250 3100 UVZ1V153MRD 2.2 5× 11 0.12 4 3 20 UVZ1H2R2MDD 3.3 5×11 0.12 4.95 3 25 UVZ1H3R3MDD 4.7 5× 11 0.12 7.05 3 30 UVZ1H4R7MDD 10 5× 11 0.12 15 5 46 UVZ1H100MDD 22 5× 11 0.12 33 11 68 UVZ1H220MDD 33 5×11 0.12 49.5 16.5 90 UVZ1H330MDD 47 6.3×11 0.12 70.5 23.5 115 UVZ1H470MED 4.7 35 （1V） Leakage Current （µA） Case Size φD×L（mm） 4.935 100 8×11.5 0.12 150 50 190 UVZ1H101MPD 220 10×12.5 0.12 330 110 300 UVZ1H221MPD 330 10 ×16 0.12 495 165 410 UVZ1H331MPD 470 12.5×20 0.12 705 235 530 UVZ1H471MHD 1000 12.5× 25 0.12 1500 500 950 UVZ1H102MHD 2200 16× 35.5 0.14 3300 1100 1470 UVZ1H222MHD 3300 18× 35.5 0.16 4950 1650 1770 UVZ1H332MHD 4700 20× 40 0.18 7050 2350 2100 UVZ1H472MRD 6800 22× 50 0.22 10200 3400 2500 UVZ1H682MRD 10000 25×50 0.30 15000 5000 2850 UVZ1H103MRD 10 5× 11 0.10 18.9 6.3 46 UVZ1J100MDD 22 5× 11 0.10 41.58 13.86 71 UVZ1J220MDD 33 6.3× 11 0.10 62.37 20.79 100 UVZ1J330MED 47 6.3× 11 0.10 88.83 29.61 120 UVZ1J470MED 10× 12.5 0.10 63 215 UVZ1J101MPD 100 189 For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UVZ ■ Dimensions Rated Voltage （V） （code） 63 （1J） 100 （2A） Rated Capacitance （µF） 250 （2E） Leakage Current （µA） Rated Ripple （mArms） at 20℃ after at 20℃ after （105℃/120Hz） 1 minute 2 minutes Part Number 10× 16 0.10 415.8 138.6 335 UVZ1J221MPD 330 10× 20 0.10 623.7 207.9 510 UVZ1J331MPD 470 12.5× 20 0.10 888.3 296.1 640 UVZ1J471MHD 1000 16× 25 0.10 1890 630 930 UVZ1J102MHD 2200 18× 35.5 0.12 4158 1386 1650 UVZ1J222MHD 3300 20× 40 0.14 6237 2079 1950 UVZ1J332MRD 4700 22× 50 0.16 8883 2961 2450 UVZ1J472MRD 6800 25× 50 0.20 12852 4284 2800 UVZ1J682MRD 2.2 5× 11 0.08 6.6 3 21 UVZ2A2R2MDD 3.3 5× 11 0.08 9.9 3.3 29 UVZ2A3R3MDD 4.7 5× 11 0.08 14.1 4.7 32 UVZ2A4R7MDD 10 6.3× 11 0.08 30 10 54 UVZ2A100MED 22 6.3× 11 0.08 66 22 93 UVZ2A220MED 33 8× 11.5 0.08 99 33 130 UVZ2A330MPD 47 10× 12.5 0.08 141 47 165 UVZ2A470MPD 100 10× 20 0.08 300 100 265 UVZ2A101MPD 220 12.5× 25 0.08 660 220 440 UVZ2A221MHD 330 12.5× 25 0.08 990 330 540 UVZ2A331MHD 470 16× 25 0.08 1410 470 715 UVZ2A471MHD 1000 18× 40 0.08 3000 1000 985 UVZ2A102MHD 2200 22× 50 0.10 6600 2200 1750 UVZ2A222MRD 3300 25× 50 0.12 9900 3300 2070 UVZ2A332MRD 0.47 6.3×11 0.20 47.52 － 11 UVZ2CR47MED 1 6.3× 11 0.20 56 － 16 UVZ2C010MED 2.2 6.3× 11 0.20 75.2 － 25 UVZ2C2R2MED 3.3 6.3× 11 0.20 92.8 － 30 UVZ2C3R3MED 4.7 6.3× 11 0.20 115.2 － 34 UVZ2C4R7MED 0.20 164 － 41 UVZ2C100MPD 8×11.5 22 10× 16 0.20 240.8 － 100 UVZ2C220MPD 33 10× 20 0.20 311.2 － 145 UVZ2C330MPD 47 12.5×20 0.20 400.8 － 195 UVZ2C470MHD 100 12.5× 25 0.20 740 － 215 UVZ2C101MHD 220 16× 35.5 0.20 1508 － 570 UVZ2C221MHD 330 18× 40 0.20 2212 － 750 UVZ2C331MHD 470 22× 40 0.20 3108 － 900 UVZ2C471MRD 1000 25× 50 0.20 6500 － 1310 UVZ2C102MRD 0.47 6.3× 11 0.20 49.4 － 11 UVZ2DR47MED 1 6.3× 11 0.20 60 － 16 UVZ2D010MED 2.2 6.3× 11 0.20 84 － 25 UVZ2D2R2MED 3.3 6.3× 11 0.20 106 － 30 UVZ2D3R3MED 8× 11.5 0.20 134 － 39 UVZ2D4R7MPD 10× 12.5 0.20 180 － 65 UVZ2D100MPD 22 10×20 0.20 276 － 120 UVZ2D220MPD 33 12.5× 20 0.20 364 － 160 UVZ2D330MHD 47 12.5× 20 0.20 476 － 195 UVZ2D470MHD 4.7 200 （2D） tan δ 220 10 160 （2C） Case Size φD×L（mm） 10 100 16×31.5 0.20 900 － 375 UVZ2D101MHD 220 18×35.5 0.20 1860 － 575 UVZ2D221MHD 330 20×40 0.20 2740 － 705 UVZ2D331MRD 470 22× 50 0.20 3860 － 840 UVZ2D471MRD 0.47 6.3 ×11 0.20 51.75 － 10 UVZ2ER47MED 1 6.3× 11 0.20 65 － 15 UVZ2E010MED 2.2 6.3× 11 0.20 95 － 23 UVZ2E2R2MED For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. CAT.8100K ALUMINUM ELECTROLYTIC CAPACITORS UVZ ■ Dimensions Rated Voltage （V） （code） 250 （2E） 315 （2F） 350 （2V） Rated Capacitance （µF） 3.3 8×11.5 0.20 122.5 － 32 UVZ2E3R3MPD 4.7 8× 11.5 0.20 147 － 39 UVZ2E4R7MPD Part Number 10 10×16 0.20 200 － 74 UVZ2E100MPD 22 12.5× 20 0.20 320 － 130 UVZ2E220MHD 33 12.5× 20 0.20 430 － 160 UVZ2E330MHD 47 12.5× 25 0.20 570 － 210 UVZ2E470MHD 100 16 ×31.5 0.20 1100 － 365 UVZ2E101MHD 220 20 ×40 0.20 2300 － 600 UVZ2E221MRD 330 22 ×50 0.20 3400 － 730 UVZ2E331MRD 470 25 ×50 0.20 4800 － 870 UVZ2E471MRD 1 6.3×11 0.20 71.5 － 15 UVZ2F010MED 2.2 8×11.5 0.20 109.3 － 26 UVZ2F2R2MPD 3.3 10× 12.5 0.20 141.58 － 38 UVZ2F3R3MPD 4.7 10×12.5 0.20 159.22 － 45 UVZ2F4R7MPD 10 10×20 0.20 226 － 80 UVZ2F100MPD 22 12.5× 20 0.20 377.2 － 115 UVZ2F220MHD 33 16×25 0.20 515.8 － 195 UVZ2F330MHD 47 16×25 0.20 692.2 － 230 UVZ2F470MHD 100 18 ×35.5 0.20 1360 － 395 UVZ2F101MHD 220 22 ×50 0.20 2872 － 620 UVZ2F221MRD 330 25 ×50 0.20 4258 － 760 UVZ2F331MRD 1 6.3× 11 0.25 75 － 15 UVZ2V010MED 2.2 8×11.5 0.25 117 － 26 UVZ2V2R2MPD 3.3 10× 12.5 0.25 146.2 － 38 UVZ2V3R3MPD 4.7 10×12.5 0.25 165.8 － 45 UVZ2V4R7MPD 10 10 ×20 0.25 240 － 80 UVZ2V100MPD 22 12.5× 25 0.25 408 － 115 UVZ2V220MHD 33 16 ×25 0.25 562 － 195 UVZ2V330MHD 47 16×35.5 0.25 758 － 270 UVZ2V470MHD 100 18× 40 0.25 1500 － 420 UVZ2V101MHD 220 22 ×50 0.25 3180 － 620 UVZ2V221MRD 8×11.5 0.25 80 － 17 UVZ2G010MPD 2.2 10 ×12.5 0.25 128 － 30 UVZ2G2R2MPD 3.3 10 ×12.5 0.25 152.8 － 38 UVZ2G3R3MPD 4.7 10 ×16 0.25 175.2 － 50 UVZ2G4R7MPD 10 12.5×20 0.25 260 － 90 UVZ2G100MHD 22 16× 25 0.25 452 － 165 UVZ2G220MHD 33 16 ×31.5 0.25 628 － 215 UVZ2G330MHD 47 16 ×35.5 0.25 852 － 270 UVZ2G470MHD 100 20× 40 0.25 1700 － 450 UVZ2G101MRD 220 25× 50 0.25 3620 － 660 UVZ2G221MRD 8×11.5 0.25 85 － 13 UVZ2W010MPD 2.2 10× 12.5 0.25 139 － 23 UVZ2W2R2MPD 3.3 10× 16 0.25 159.4 － 31 UVZ2W3R3MPD 4.7 10× 20 0.25 184.6 － 40 UVZ2W4R7MPD 10 12.5×20 0.25 280 － 65 UVZ2W100MHD 22 16×25 0.25 496 － 115 UVZ2W220MHD 33 16×35.5 0.25 694 － 165 UVZ2W330MHD 47 18×40 0.25 946 － 185 UVZ2W470MHD 100 22×40 0.25 1900 － 270 UVZ2W101MRD 1 450 （2W） Rated Ripple （mArms） at 20℃ after at 20℃ after （105℃/120Hz） 1 minute 2 minutes tan δ 1 400 （2G） Leakage Current （µA） Case Size φD×L（mm） For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ). If there is no size code in the part number, please add size code “1” and then add the appropriate code. For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100K