UWR0J470MCL1GB

ALUMINUM ELECTROLYTIC CAPACITORS Surface Mount Type Vibration Resistance Type (UCZ, UCH, UCX, UUE, UBC) Recommended Land Size (mm) a Y a Size X Y φ4 1.6 2.6 1.0 φ5 1.6 3.0 1.4 φ6.3 1.6 3.5 1.9 φ8×5.4L, φ8×6.2L 2.5 4.0 2.1 φ8 × 10L 2.5 3.5 3.0 2.5 4.0 4.0 Y φ10 X q φ6.3 to 10 Size X Y q φ6.3 to 10 φ6.3 × 7.7 L 3.0 4.0 1.6 φ6.3 × 10 L 3.0 4.0 1.6 w φ12.5 to 18 φ8 × 10 L 4.3 5.3 2.0 φ10 × 10 L 4.3 5.6 3.3 E w φ12.5 Gto F18G E G F G Perpendicularly mounted terminal type Size X Y a φ12.5 2.0 7.3 3.0 φ 16 2.0 7.9 5.3 φ 18 2.0 8.9 5.3 a C D B CA D B A Size B C D E F G φ 12.5 3.0 φ16 5.3 A 2.3 2.9 5.0 5.0 7.3 7.9 7.0 7.0 2.0 2.0 2.5 2.5 φ18 3.1 5.8 8.9 11.0 2.0 4.5 5.3  hip product of φ12.5 or larger where the 11th C digit of the product number code is “Q” or “J ”. Reflow Temperature(℃) Recommended conditions of Soldering by Reflow Peak 230 220 217 200 T220 T217 The temperature measuring point is at the case top. T200 Pre-heating 0 No. T200 : Duration for over + 200℃ at capacitor surface. T217 : Duration for over + 217℃ at capacitor surface. T220 : Duration for over + 220℃ at capacitor surface. T230 : Duration for over + 230℃ at capacitor surface. T230 180 150 Please contact us if capacitors are subject to the conditions other than the allowable range of reflow. Time (s) Type・Series Size Pre - heating Peak temperature Duration Duration Duration Duration over over over over 230°C 220°C 217°C 200°C Reflow cycle Chip Type Aluminum Electrolytic Capacitors 1 2 UZS, UZT, UWX ※1, UWR, UWP ※1, UWT ※1, UWF, UWG, UUP, UUT, UUA, UUL, UCB, UCW, UCD ※2, UCL, UCM ※2, UCV, UUD, UUB ※3, UCJ, UCZ ※2, UCH, UCX ※2, UUR, UUX ※3, UUQ, UCQ, UUE ※2, UBC ※2 Chip Type Aluminum Electrolytic Capacitors ( UWX, UWP, UWT ) 3 Chip Type Aluminum Electrolytic Capacitors ～ φ10 250°C Max. within 30s — within 40s — within 2 cycles ※ 4 φ8 × 5.4L 245°C Max. — within 30s within 30s — within 2 cycles ※ 4 240°C Max. — within 30s within 30s — ～ φ10 240°C Max. — within 30s within 30s — φ12.5 ～ 240°C Max. — — within 30s within 60s within 2 cycles ※ 4 — 260°C Max. within 60s — within 70s — within 2 cycles ※ 4 φ8 × 6.2L and φ10 × 10L : 1 cycle only 3.9L ( UZR, UZG ) Chip Type Aluminum Electrolytic Capacitors 4 5 6 UUX ( 160 - 400V ), UUB ( 160 - 400V ), ULT, ULH, ULR, ULV Chip Type Aluminum Electrolytic Capacitors UCD, UCM, UCZ, UCX, UUG, UUJ, UUN, UUE, UBC Chip Type Aluminum Electrolytic Capacitors ※5 ( UWJ, UWZ, UWD, UWH ) +150°C to 180°C within 120s within 2 cycles ※ 4 ( φ 6.3 : 1 cycle only ) within 2 cycles ※ 4 ( φ 6.3 : 1 cycle only ) ※1 : For φ8 × 5.4L, please refer to the No.2.　※2 : For φ12.5 or greater, please refer to the No.5. ※3 : For 160～400V, please refer to the No.4.　※4 : Please make sure the parts have enough cooling down time between the first and second soldering process. ※5 : For High Temp. Reflow. s = seconds CAT.8100J-1