UZG1HR22MCL1GB

ALUMINUM  ELECTROLYTIC  CAPACITORS UZG 3.95mmLmax. Chip Type, Wide Temperature Range Chip type with 3.95mmLmax height. Operating over wide temperature range of – 40 to +105°C. Designed for surface mounting on high density PC board. Applicable to automatic mounting machine fed with carrier tape. Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). AEC-Q200 compliant. Please contact us for details. UZT Smaller UZG Specifications Item Performance Characteristics Category Temperature Range –40 to +105°C Rated Voltage Range 6.3 to 50V Rated Capacitance Range 1 to 100µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01 CV or 3 (µA) , whichever is greater. 6.3 10 16 25 35 50 0.38 0.32 0.20 0.16 0.14 0.14 Rated voltage (V) 6.3 10 16 25 35 50 Impedance ratio Z(–25°C) / Z(+20°C) ZT / Z20 (max.) Z(–40°C) / Z(+20°C) 6 5 3 3 3 3 10 10 6 6 4 4 Rated voltage (V) Tangent of loss angle (tan δ) tan δ (max.) Stability at Low Temperature Capacitance change tan δ Leakage current 120Hz 20°C 120Hz Within ±30% of the initial capacitance value 300% or less than the initial specified value Less than or equal to the initial specified value Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 105°C. Shelf Life After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Resistance to soldering heat The capacitors are kept on a hot plate for 30 seconds, which is maintained at 250°C. The capacitors shall meet the characteristic requirements listed at right when they are removed from the plate and restored to 20°C. Marking Black print on the case top. Capacitance change tan δ Leakage current Within ±10% of the initial capacitance value Less than or equal to the initial specified value Less than or equal to the initial specified value ※ I : Leakage Current (μA), C : Rated Capacitance (μF), V : Rated Voltage (V) Chip Type Type numbering system (Example : 16V 10µF) 1 Positive Capacitance Voltage V Code 3.90 +0.05 –0.2 3.90 +0.05 –0.2 6.3 10 16 25 35 50 j A C E V H C±0.2 0.5 to 0.8 A±0.3 A±0.3 Capacitance C±0.2 max. Plastic0.3 platform 0.3 MAX. B±0.2 B±0.2 Series φD±0.5 φD±0.5 Series Lot No. X2A2 10C 10C ZGZG Lot No.(C : 16V) Voltage φD A B C E Negative 0.5 to 0.8 2 3 4 5 6 7 8 9 10 11 12 13 14 1 Z 2 G 3 1 4 C 5 1 6 0 7 0 8 M 9 C 10 11 13 B 14 U L 12 1 G U ZG 1 C 1 0 0 MC L 1 GB Positive Plastic platform 0.5 max. 0.5 MAX. A±0.3 E E A±0.3 Voltage (C : 16V) Negative 4 1.8 4.3 4.3 1.0 5 2.1 5.3 5.3 1.3 (mm) 6.3 2.4 6.6 6.6 2.2 Taping code Configuration Taping code Configuration Capacitance tolerance (±20%) Capacitance tolerance (±20%) Rated capacitance (10µF) RatedRated capacitance voltage(10µF) (16V) Rated voltage (16V) Series name Series name Type Type Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 10 kHz or more 1.50　　 Dimension table in next page. CAT.8100L ALUMINUM  ELECTROLYTIC  CAPACITORS UZG Dimensions Rated Voltage （V） （code） 6.3 （0J） 10 （1A） 16 （1C） Rated Capacitance （µF） Case Size φD×L（mm） tan δ 22 4×3.9 0.38 50 （1H） ） 3 Part Number 19 UZG0J220MCL1GB 33 5× 3.9 0.38 3 26 UZG0J330MCL1GB 5× 3.9 0.38 3 32 UZG0J470MCL1GB 100 6.3×3.9 0.38 6.3 52 UZG0J101MCL1GB 22 5×3.9 0.32 3 24 UZG1A220MCL1GB 33 5× 3.9 0.32 3.3 30 UZG1A330MCL1GB 47 6.3×3.9 0.32 4.7 40 UZG1A470MCL1GB 10 4× 3.9 0.20 3 16 UZG1C100MCL1GB 22 5×3.9 0.20 3.52 26 UZG1C220MCL1GB 33 6.3×3.9 0.20 5.28 35 UZG1C330MCL1GB 47 6.3×3.9 0.20 7.52 44 UZG1C470MCL1GB 4×3.9 0.16 3 11 UZG1E4R7MCL1GB 10 5×3.9 0.16 3 20 UZG1E100MCL1GB 22 6.3×3.9 0.16 5.5 33 UZG1E220MCL1GB 33 6.3×3.9 0.16 8.25 42 UZG1E330MCL1GB 4×3.9 0.14 3 13 UZG1V4R7MCL1GB 4.7 35 （1V） （ Rated Ripple （mArms） （105℃/120Hz） 47 4.7 25 （1E） Leakage Current （µA） at 20℃ after 2 minutes 10 5× 3.9 0.14 3.5 22 UZG1V100MCL1GB 22 6.3×3.9 0.14 7.7 36 UZG1V220MCL1GB 1 4×3.9 0.14 3 2.2 4× 3.9 0.14 3 3.3 4× 3.9 0.14 3 4.7 10 5.4 9.6 12 UZG1H010MCL1GB UZG1H2R2MCL1GB UZG1H3R3MCL1GB 5× 3.9 0.14 3 16 UZG1H4R7MCL1GB 6.3× 3.9 0.14 5 26 UZG1H100MCL1GB For taping specifications, recommended land size/soldering by reflow and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. CAT.8100L